| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_200K
| ...
-| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
| ... | L3 | Intel-X520-DA2
-| Suite Teardown | 3-node Performance Suite Teardown
+| Suite Teardown | Tear down 3-node performance topology
| ...
-| Test Setup | Performance test setup
-| Test Teardown | Performance ndrchk test teardown
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance ndrchk test
| ...
| Documentation | *Reference NDR throughput IPv6 routing verify test cases*
| ...
*** Variables ***
| ${rts_per_flow}= | ${100000}
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip6-ip6dst${rts_per_flow}
*** Test Cases ***
| tc01-78B-1t1c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
| | ... | frames using single trial throughput test at 2x 2.3mpps.
-| | [Tags] | 1T1C | STHREAD
+| | [Tags] | 78B | 1T1C | STHREAD
| | ${framesize}= | Set Variable | ${78}
| | ${rate}= | Set Variable | 2.3mpps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | And Initialize IPv6 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
+| | ... | ${framesize} | ${traffic_profile}
| tc02-1518B-1t1c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
| | ... | frames using single trial throughput test at 2x 812743pps.
-| | [Tags] | 1T1C | STHREAD
+| | [Tags] | 1518B | 1T1C | STHREAD
| | ${framesize}= | Set Variable | ${1518}
| | ${rate}= | Set Variable | 812743pps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | And Initialize IPv6 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
+| | ... | ${framesize} | ${traffic_profile}
| tc03-9000B-1t1c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
| | ... | frames using single trial throughput test at 2x 138580pps.
-| | [Tags] | 1T1C | STHREAD
+| | [Tags] | 9000B | 1T1C | STHREAD
| | ${framesize}= | Set Variable | ${9000}
| | ${rate}= | Set Variable | 138580pps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | And Initialize IPv6 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
+| | ... | ${framesize} | ${traffic_profile}
| tc04-78B-2t2c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
| | ... | frames using single trial throughput test at 2x 5.0mpps.
-| | [Tags] | 2T2C | MTHREAD
+| | [Tags] | 78B | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | ${78}
| | ${rate}= | Set Variable | 5.0mpps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | And Initialize IPv6 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
+| | ... | ${framesize} | ${traffic_profile}
| tc05-1518B-2t2c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
| | ... | frames using single trial throughput test at 2x 812743pps.
-| | [Tags] | 2T2C | MTHREAD
+| | [Tags] | 1518B | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | ${1518}
| | ${rate}= | Set Variable | 812743pps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | And Initialize IPv6 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
+| | ... | ${framesize} | ${traffic_profile}
| tc06-9000B-2t2c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \
| | ... | 1 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
| | ... | frames using single trial throughput test at 2x 138580pps.
-| | [Tags] | 2T2C | MTHREAD
+| | [Tags] | 9000B | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | ${9000}
| | ${rate}= | Set Variable | 138580pps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | And Initialize IPv6 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
+| | ... | ${framesize} | ${traffic_profile}
| tc07-78B-4t4c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
| | ... | 2 receive queue per NIC port. [Ver] Verify ref-NDR for 78 Byte
| | ... | frames using single trial throughput test at 2x 5.7mpps.
-| | [Tags] | 4T4C | MTHREAD
+| | [Tags] | 78B | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | ${78}
| | ${rate}= | Set Variable | 5.7mpps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | And Initialize IPv6 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
+| | ... | ${framesize} | ${traffic_profile}
| tc08-1518B-4t4c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
| | ... | 2 receive queue per NIC port. [Ver] Verify ref-NDR for 1518 Byte
| | ... | frames using single trial throughput test at 2x 812743pps.
-| | [Tags] | 4T4C | MTHREAD
+| | [Tags] | 1518B | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | ${1518}
| | ${rate}= | Set Variable | 812743pps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | And Initialize IPv6 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
+| | ... | ${framesize} | ${traffic_profile}
| tc09-9000B-4t4c-ethip6-ip6scale200k-ndrchk
| | [Documentation]
| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \
| | ... | 2 receive queue per NIC port. [Ver] Verify ref-NDR for 9000 Byte
| | ... | frames using single trial throughput test at 2x 138580pps.
-| | [Tags] | 4T4C | MTHREAD
+| | [Tags] | 9000B | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | ${9000}
| | ${rate}= | Set Variable | 138580pps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
| | And Apply startup configuration on all VPP DUTs
-| | And Scale IPv6 forwarding initialized in a 3-node circular topology
+| | And Initialize IPv6 forwarding with scaling in 3-node circular topology
| | ... | ${rts_per_flow}
| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
-| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow}
+| | ... | ${framesize} | ${traffic_profile}