# limitations under the License.
*** Settings ***
-| Resource | resources/libraries/robot/performance.robot
+| Resource | resources/libraries/robot/performance_setup.robot
| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
| ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY
| ...
-| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
| ... | L3 | Intel-X520-DA2
-| Suite Teardown | 3-node Performance Suite Teardown
+| Suite Teardown | Tear down 3-node performance topology
| ...
-| Test Setup | Performance test setup
-| Test Teardown | Performance ndrchk test teardown
+| Test Setup | Set up performance test
+| Test Teardown | Tear down performance ndrchk test
| ...
| Documentation | *Reference NDR throughput Lisp tunnel verify test cases*
| ...
| | [Tags] | 78B | 1T1C | STHREAD
| | ${framesize}= | Set Variable | ${78}
| | ${rate}= | Set Variable | 1.56mpps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
| | [Tags] | 1460B | 1T1C | STHREAD
| | ${framesize}= | Set Variable | ${1460}
| | ${rate}= | Set Variable | 740000pps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
| | [Tags] | 9000B | 1T1C | STHREAD
| | ${framesize}= | Set Variable | ${9000}
| | ${rate}= | Set Variable | 120000pps
-| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '1' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
| | [Tags] | 78B | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | ${78}
| | ${rate}= | Set Variable | 3.2mpps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
| | [Tags] | 1460B | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | ${1460}
| | ${rate}= | Set Variable | 740000pps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
| | [Tags] | 9000B | 2T2C | MTHREAD
| | ${framesize}= | Set Variable | ${9000}
| | ${rate}= | Set Variable | 120000pps
-| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '2' worker threads and '1' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
| | [Tags] | 78B | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | ${78}
| | ${rate}= | Set Variable | 3.2mpps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
| | [Tags] | 1460B | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | ${1460}
| | ${rate}= | Set Variable | 740000pps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
-| | And Add No Multi Seg to all DUTs
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
| | [Tags] | 9000B | 4T4C | MTHREAD
| | ${framesize}= | Set Variable | ${9000}
| | ${rate}= | Set Variable | 120000pps
-| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And Add PCI devices to DUTs from 3-node single link topology
+| | Given Add '4' worker threads and '2' rxqueues in 3-node single-link circular topology
+| | And Add PCI devices to DUTs in 3-node single link topology
| | And Apply startup configuration on all VPP DUTs
-| | When Lisp IPv6 forwarding initialized in a 3-node circular topology
+| | When Initialize LISP IPv6 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6}
| | ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Set up Lisp topology
+| | And Configure LISP topology in 3-node circular topology
| | ... | ${dut1} | ${dut1_if2} | ${NONE}
| | ... | ${dut2} | ${dut2_if1} | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}