-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
# limitations under the License.
*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
+| Library | resources.libraries.python.Classify.Classify
+| Library | resources.libraries.python.Trace
+| ...
+| Resource | resources/libraries/robot/ip/ip4.robot
+| Resource | resources/libraries/robot/l2/l2_traffic.robot
+| Resource | resources/libraries/robot/l2/l2_xconnect.robot
| Resource | resources/libraries/robot/shared/counters.robot
+| Resource | resources/libraries/robot/shared/default.robot
| Resource | resources/libraries/robot/shared/interfaces.robot
| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/l2/l2_traffic.robot
| Resource | resources/libraries/robot/shared/traffic.robot
-| Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.Trace
+| ...
| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | SKIP_VPP_PATCH
+| ...
| Test Setup | Set up functional test
+| ...
| Test Teardown | Tear down functional test
+| ...
| Documentation | *IPv4 routing with ingress ACL test cases*
| ...
| ... | Encapsulations: Eth-IPv4 on links TG-DUT1, TG-DUT2, DUT1-DUT2. IPv4
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And Add Arp On Dut
+| | And VPP Add IP Neighbor
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
| | ... | ${tg_to_dut2_mac}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
| | Then Send packet and verify headers | ${tg_node}
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And Add Arp On Dut
+| | And VPP Add IP Neighbor
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
| | ... | ${tg_to_dut2_mac}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${non_drop_dst_ip} | ${prefix_length}
-| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
| | Then Send packet and verify headers | ${tg_node}
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And Add Arp On Dut
+| | And VPP Add IP Neighbor
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
| | ... | ${tg_to_dut2_mac}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${non_drop_dst_ip} | ${prefix_length}
-| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
| | Then Send packet and verify headers | ${tg_node}
| | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
| | ... | And Vpp Creates Classify Table L3 | ${dut1_node} | ${ip_version} | dst
| | And Vpp Configures Classify Session L3
-| | ... | ${dut1_node} | deny | ${table_index_1} | ${skip_n_1} | ${match_n_2}
+| | ... | ${dut1_node} | deny | ${table_index_1} | ${skip_n_1} | ${match_n_1}
| | ... | ${ip_version} | src | ${test_src_ip}
| | And Vpp Configures Classify Session L3
| | ... | ${dut1_node} | deny | ${table_index_2} | ${skip_n_2} | ${match_n_2}
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And Add Arp On Dut
+| | And VPP Add IP Neighbor
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
| | ... | ${tg_to_dut2_mac}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And Add Arp On Dut
+| | And VPP Add IP Neighbor
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
| | ... | ${tg_to_dut2_mac}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And Add Arp On Dut
+| | And VPP Add IP Neighbor
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
| | ... | ${tg_to_dut2_mac}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And Add Arp On Dut
+| | And VPP Add IP Neighbor
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
| | ... | ${tg_to_dut2_mac}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And Add Arp On Dut
+| | And VPP Add IP Neighbor
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
| | ... | ${tg_to_dut2_mac}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20
| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP
-| | ... | source + destination
+| | ... | source + destination
| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20
| | ${table_index} | ${skip_n} | ${match_n}=
| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And Add Arp On Dut
+| | And VPP Add IP Neighbor
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
| | ... | ${tg_to_dut2_mac}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And Add Arp On Dut
+| | And VPP Add IP Neighbor
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
| | ... | ${tg_to_dut2_mac}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | Given Configure path in 3-node circular topology
| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
+| | And VPP Interface Set IP Address | ${dut1_node}
| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
-| | And Add Arp On Dut
+| | And VPP Add IP Neighbor
| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
| | ... | ${tg_to_dut2_mac}
| | And Vpp Route Add
| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
-| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2}
+| | ... | gateway=${dut1_to_dut2_ip_GW} | interface=${dut1_to_dut2}
| | And Configure L2XC
| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20
| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP
-| | ... | source + destination
+| | ... | source + destination
| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20
| | ${table_index} | ${skip_n} | ${match_n}=
| | ... | When Vpp Creates Classify Table Hex | ${dut1_node} | ${hex_mask}