+++ /dev/null
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | L2XCFWD | BASE | MEMIF | LXC
-| ... | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | eth-l2xcbase-eth-2memif-1lxc
-|
-| Suite Setup | Setup suite topology interfaces | performance
-| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test | performance
-| Test Teardown | Tear down test | performance | container
-|
-| Test Template | Local Template
-|
-| Documentation | *RFC2544: Pkt throughput L2XC test cases*
-|
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
-| ... | connect. DUT1 and DUT2 tested with ${nic_name}.\
-| ... | LXC is connected to VPP via Memif interface. LXC is running same VPP
-| ... | version as running on DUT. LXC is limited via cgroup to use 3 cores
-| ... | allocated from pool of isolated CPUs. There are no memory contraints.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using MLRsearch library.\
-| ... | Test packets are generated by TG on links to DUTs. TG traffic profile
-| ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
-| ... | flow-group) with all packets containing Ethernet header, IPv4 header
-| ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
-| ... | addresses of the TG node interfaces.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${osi_layer}= | L2
-| ${overhead}= | ${0}
-# Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
-# Container
-| ${container_engine}= | LXC
-| ${container_chain_topology}= | chain
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config.
-| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
-| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
-| | ... | Type: integer, string
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Start containers for test
-| | And Initialize L2 xconnect with memif pairs
-| | Then Find NDR and PDR intervals using optimized search
-
-*** Test Cases ***
-| 64B-1c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr
-| | [Tags] | 64B | 1C
-| | frame_size=${64} | phy_cores=${1}
-
-| 64B-2c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr
-| | [Tags] | 64B | 2C
-| | frame_size=${64} | phy_cores=${2}
-
-| 64B-4c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr
-| | [Tags] | 64B | 4C
-| | frame_size=${64} | phy_cores=${4}
-
-| 1518B-1c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr
-| | [Tags] | 1518B | 1C
-| | frame_size=${1518} | phy_cores=${1}
-
-| 1518B-2c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr
-| | [Tags] | 1518B | 2C
-| | frame_size=${1518} | phy_cores=${2}
-
-| 1518B-4c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr
-| | [Tags] | 1518B | 4C
-| | frame_size=${1518} | phy_cores=${4}
-
-| 9000B-1c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr
-| | [Tags] | 9000B | 1C
-| | frame_size=${9000} | phy_cores=${1}
-
-| 9000B-2c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr
-| | [Tags] | 9000B | 2C
-| | frame_size=${9000} | phy_cores=${2}
-
-| 9000B-4c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr
-| | [Tags] | 9000B | 4C
-| | frame_size=${9000} | phy_cores=${4}
-
-| IMIX-1c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr
-| | [Tags] | IMIX | 1C
-| | frame_size=IMIX_v4_1 | phy_cores=${1}
-
-| IMIX-2c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr
-| | [Tags] | IMIX | 2C
-| | frame_size=IMIX_v4_1 | phy_cores=${2}
-
-| IMIX-4c-eth-l2xcbase-eth-2memif-1lxc-ndrpdr
-| | [Tags] | IMIX | 4C
-| | frame_size=IMIX_v4_1 | phy_cores=${4}
Code Review / csit.git / blobdiff