| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
| | ...
| | Given Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
-| | And Add PCI devices to DUTs in 3-node single link topology
+| | And Add PCI devices to all DUTs
| | And Run Keyword If | ${get_framesize} < ${1522}
| | ... | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | ... | ip4 | dst | 10.10.10.2
| | And Vpp Enable Input Acl Interface
| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with maximum rate | ${perf_trial_duration}
+| | Then Traffic should pass with maximum rate
| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
*** Test Cases ***
| tc01-64B-1t1c-ethip4-ip4base-iacldstbase-mrr
| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | 1 phy core, 1 receive queue per NIC port.
| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
| | ... | throughput test.
| | ...
-| | [Tags] | 64B | 1T1C | STHREAD
+| | [Tags] | 64B | 1C
| | ...
| | [Template] | Check RR for ethip4-ip4base-iacldstbase
| | wt=1 | rxq=1 | framesize=${64}
| tc02-1518B-1t1c-ethip4-ip4base-iacldstbase-mrr
| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | 1 phy core, 1 receive queue per NIC port.
| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
| | ... | throughput test.
| | ...
-| | [Tags] | 1518B | 1T1C | STHREAD
+| | [Tags] | 1518B | 1C
| | ...
| | [Template] | Check RR for ethip4-ip4base-iacldstbase
| | wt=1 | rxq=1 | framesize=${1518}
| tc03-9000B-1t1c-ethip4-ip4base-iacldstbase-mrr
| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | 1 phy core, 1 receive queue per NIC port.
| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
| | ... | throughput test.
| | ...
-| | [Tags] | 9000B | 1T1C | STHREADC
+| | [Tags] | 9000B | 1CC
| | ...
| | [Template] | Check RR for ethip4-ip4base-iacldstbase
| | wt=1 | rxq=1 | framesize=${9000}
| tc04-IMIX-1t1c-ethip4-ip4base-iacldstbase-mrr
| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
+| | ... | 1 phy core, 1 receive queue per NIC port.
| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
| | ... | throughput test.
| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
| | ...
-| | [Tags] | IMIX | 1T1C | STHREAD
+| | [Tags] | IMIX | 1C
| | ...
| | [Template] | Check RR for ethip4-ip4base-iacldstbase
| | wt=1 | rxq=1 | framesize=IMIX_v4_1
| tc05-64B-2t2c-ethip4-ip4base-iacldstbase-mrr
| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
-| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | 2 phy cores, 1 receive queue per NIC port.
| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
| | ... | throughput test.
| | ...
-| | [Tags] | 64B | 2T2C | MTHREAD
+| | [Tags] | 64B | 2C
| | ...
| | [Template] | Check RR for ethip4-ip4base-iacldstbase
| | wt=2 | rxq=1 | framesize=${64}
| tc06-1518B-2t2c-ethip4-ip4base-iacldstbase-mrr
| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
-| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | 2 phy cores, 1 receive queue per NIC port.
| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
| | ... | throughput test.
| | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD
+| | [Tags] | 1518B | 2C
| | ...
| | [Template] | Check RR for ethip4-ip4base-iacldstbase
| | wt=2 | rxq=1 | framesize=${1518}
| tc07-9000B-2t2c-ethip4-ip4base-iacldstbase-mrr
| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
-| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | 2 phy cores, 1 receive queue per NIC port.
| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
| | ... | throughput test.
| | ...
-| | [Tags] | 9000B | 2T2C | MTHREAD
+| | [Tags] | 9000B | 2C
| | ...
| | [Template] | Check RR for ethip4-ip4base-iacldstbase
| | wt=2 | rxq=1 | framesize=${9000}
| tc08-IMIX-2t2c-ethip4-ip4base-iacldstbase-mrr
| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
-| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
+| | ... | 2 phy cores, 1 receive queue per NIC port.
| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
| | ... | throughput test.
| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
| | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD
+| | [Tags] | IMIX | 2C
| | ...
| | [Template] | Check RR for ethip4-ip4base-iacldstbase
| | wt=2 | rxq=1 | framesize=IMIX_v4_1
| tc09-64B-4t4c-ethip4-ip4base-iacldstbase-mrr
| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
-| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | 4 phy cores, 2 receive queues per NIC port.
| | ... | [Ver] Measure MaxReceivedRate for 64B frames using single trial\
| | ... | throughput test.
| | ...
-| | [Tags] | 64B | 4T4C | MTHREAD
+| | [Tags] | 64B | 4C
| | ...
| | [Template] | Check RR for ethip4-ip4base-iacldstbase
| | wt=4 | rxq=2 | framesize=${64}
| tc10-1518B-4t4c-ethip4-ip4base-iacldstbase-mrr
| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
-| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | 4 phy cores, 2 receive queues per NIC port.
| | ... | [Ver] Measure MaxReceivedRate for 1518B frames using single trial\
| | ... | throughput test.
| | ...
-| | [Tags] | 1518B | 4T4C | MTHREAD
+| | [Tags] | 1518B | 4C
| | ...
| | [Template] | Check RR for ethip4-ip4base-iacldstbase
| | wt=4 | rxq=2 | framesize=${1518}
| tc11-9000B-4t4c-ethip4-ip4base-iacldstbase-mrr
| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
-| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | 4 phy cores, 2 receive queues per NIC port.
| | ... | [Ver] Measure MaxReceivedRate for 9000B frames using single trial\
| | ... | throughput test.
| | ...
-| | [Tags] | 9000B | 4T4C | MTHREAD
+| | [Tags] | 9000B | 4C
| | ...
| | [Template] | Check RR for ethip4-ip4base-iacldstbase
| | wt=4 | rxq=2 | framesize=${9000}
| tc12-IMIX-4t4c-ethip4-ip4base-iacldstbase-mrr
| | [Documentation]
| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
-| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
+| | ... | 4 phy cores, 2 receive queues per NIC port.
| | ... | [Ver] Measure MaxReceivedRate for IMIX_v4_1 frames using single trial\
| | ... | throughput test.
| | ... | IMIX_v4_1 = (28x64B; 16x570B; 4x1518B)
| | ...
-| | [Tags] | IMIX | 4T4C | MTHREAD
+| | [Tags] | IMIX | 4C
| | ...
| | [Template] | Check RR for ethip4-ip4base-iacldstbase
| | wt=4 | rxq=2 | framesize=IMIX_v4_1