-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2020 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
# limitations under the License.
*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
+| Resource | resources/libraries/robot/shared/default.robot
+|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
-| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | DOT1Q | IP6BASE
-| ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L3 | ${nic_name}
+| ... | NIC_Intel-X710 | ETH | IP6FWD | BASE | DOT1Q | IP6BASE | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | dot1q-ip6base
+|
+| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
-| ...
-| Test Setup | Set up performance test
+| Test Setup | Setup test | performance | performance
| Test Teardown | Tear down test | performance
-| ...
+|
| Test Template | Local Template
-| ...
+|
| Documentation | *RFC2544: Pkt throughput IPv6 routing with IEEE 802.1Q test
| ... | cases*
-| ...
+|
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| ... | with single links between nodes.
| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. IEEE 802.1Q\
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
| ${overhead}= | ${4}
| ${subid}= | 10
| ${tag_rewrite}= | pop-1
| ${tg_if1_net}= | 2001:1::0
| ${tg_if2_net}= | 2001:2::0
# Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
+| ${traffic_profile}= | trex-stl-3n-ethip6-ip6src253
*** Keywords ***
| Local Template
| | ... | [Cfg] Each DUT runs IPv6 routing with VLAN and uses ${phy_cores}\
| | ... | physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | Set Max Rate And Jumbo And Handle Multi Seg
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
-| | When Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology
| | ... | ${tg_if1_net} | ${tg_if2_net} | ${subid} | ${tag_rewrite}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| tc01-78B-1c-dot1q-ip6base-ndrpdr
+| 78B-1c-dot1q-ip6base-ndrpdr
| | [Tags] | 78B | 1C
| | frame_size=${78} | phy_cores=${1}
-| tc02-78B-2c-dot1q-ip6base-ndrpdr
+| 78B-2c-dot1q-ip6base-ndrpdr
| | [Tags] | 78B | 2C
| | frame_size=${78} | phy_cores=${2}
-| tc03-78B-4c-dot1q-ip6base-ndrpdr
+| 78B-4c-dot1q-ip6base-ndrpdr
| | [Tags] | 78B | 4C
| | frame_size=${78} | phy_cores=${4}
-| tc04-1518B-1c-dot1q-ip6base-ndrpdr
+| 1518B-1c-dot1q-ip6base-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| tc05-1518B-2c-dot1q-ip6base-ndrpdr
+| 1518B-2c-dot1q-ip6base-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| tc06-1518B-4c-dot1q-ip6base-ndrpdr
+| 1518B-4c-dot1q-ip6base-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| tc07-9000B-1c-dot1q-ip6base-ndrpdr
+| 9000B-1c-dot1q-ip6base-ndrpdr
| | [Tags] | 9000B | 1C
| | frame_size=${9000} | phy_cores=${1}
-| tc08-9000B-2c-dot1q-ip6base-ndrpdr
+| 9000B-2c-dot1q-ip6base-ndrpdr
| | [Tags] | 9000B | 2C
| | frame_size=${9000} | phy_cores=${2}
-| tc09-9000B-4c-dot1q-ip6base-ndrpdr
+| 9000B-4c-dot1q-ip6base-ndrpdr
| | [Tags] | 9000B | 4C
| | frame_size=${9000} | phy_cores=${4}
-| tc10-IMIX-1c-dot1q-ip6base-ndrpdr
+| IMIX-1c-dot1q-ip6base-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| tc11-IMIX-2c-dot1q-ip6base-ndrpdr
+| IMIX-2c-dot1q-ip6base-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| tc12-IMIX-4c-dot1q-ip6base-ndrpdr
+| IMIX-4c-dot1q-ip6base-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}