-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2020 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/overlay/lisp_static_adjacency.robot
+| Resource | resources/libraries/robot/overlay/lisp.robot
+|
| Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py
-| ...
+|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | IP6FWD | ENCAP | LISP | IP4UNRLAY | IP6OVRLAY
-| ...
-| Suite Setup | Setup suite single link | performance
+| ... | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip6lispip4-ip6base
+|
+| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test
+| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance
-| ...
+|
| Test Template | Local Template
-| ...
+|
| Documentation | *RFC6830: Pkt throughput Lisp test cases*
-| ...
+|
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| ... | with single links between nodes.\
| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-LISP-IPv4 on DUT1-DUT2,\
*** Variables ***
| @{plugins_to_enable}= | dpdk_plugin.so
-| ${osi_layer}= | L3
+| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
-# LISP overhead
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${osi_layer}= | L3
| ${overhead}= | 48
# Traffic profile:
| ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
| | ... | filters config.\
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.\
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - frame_size - Frame size in Bytes as integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
| | Set Test Variable | \${frame_size}
-| | ...
-| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
-| | And Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
| | And Apply startup configuration on all VPP DUTs
| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
| | And Initialize LISP IPv6 over IPv4 forwarding in 3-node circular topology
| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4}
| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4}
| | And Configure LISP topology in 3-node circular topology
-| | ... | ${dut1} | ${dut1_if2} | ${NONE}
-| | ... | ${dut2} | ${dut2_if1} | ${NONE}
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${NONE}
+| | ... | ${dut2} | ${DUT2_${int}1}[0] | ${NONE}
| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency}
| | Then Find NDR and PDR intervals using optimized search