-# Copyright (c) 2019 Cisco and/or its affiliates.
+# Copyright (c) 2021 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
*** Settings ***
| Resource | resources/libraries/robot/shared/default.robot
| Resource | resources/libraries/robot/l2/tagging.robot
-| ...
+|
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
| ... | NIC_Intel-X710 | L2XCFWD | BASE | DOT1AD | DRV_VFIO_PCI
-| ...
-| Suite Setup | Setup suite single link | performance
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | dot1ad-l2xcbase
+|
+| Suite Setup | Setup suite topology interfaces | performance
| Suite Teardown | Tear down suite | performance
-| Test Setup | Setup test
+| Test Setup | Setup test | performance
| Test Teardown | Tear down test | performance
-| ...
+|
| Test Template | Local Template
-| ...
+|
| Documentation | *RFC2544: Pkt throughput L2XC with 802.1ad test cases*
-| ...
+|
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
| ... | with single links between nodes.
| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 xconnect.
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
| ${crypto_type}= | ${None}
| ${nic_name}= | Intel-X710
| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
| ${osi_layer}= | L2
| ${overhead}= | ${8}
| ${subid}= | 10
-| ${outer_vlan_id}= | 100
-| ${inner_vlan_id}= | 200
+| ${outer_vlan_id}= |
+| ${inner_vlan_id}= |
| ${type_subif}= | two_tags
| ${tag_rewrite}= | pop-2
# Traffic profile:
-| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254
*** Keywords ***
| Local Template
| | ... | [Cfg] DUT runs L2XC forwarding config.
| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
-| | ...
+| |
| | ... | *Arguments:*
| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
| | ... | Type: integer, string
| | ... | - phy_cores - Number of physical cores. Type: integer
| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| | ...
+| |
| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| | ...
+| |
| | Set Test Variable | \${frame_size}
-| | ...
+| |
| | Given Set Max Rate And Jumbo
| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
| | And Pre-initialize layer driver | ${nic_driver}
| | When Initialize layer driver | ${nic_driver}
| | And Initialize layer interface
| | When Initialize VLAN sub-interfaces in 3-node circular topology
-| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
+| | ... | ${dut1} | ${DUT1_${int}2}[0] | ${dut2} | ${DUT2_${int}1}[0] | ${subid}
| | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif}
| | And Configure L2 tag rewrite method on interfaces
| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
| | ... | ${tag_rewrite}
| | And Configure L2XC
-| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${subif_index_1}
| | And Configure L2XC
-| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
+| | ... | ${dut2} | ${DUT2_${int}2}[0] | ${subif_index_2}
| | Then Find NDR and PDR intervals using optimized search
*** Test Cases ***
-| tc01-64B-1c-dot1ad-l2xcbase-ndrpdr
+| 64B-1c-dot1ad-l2xcbase-ndrpdr
| | [Tags] | 64B | 1C
| | frame_size=${64} | phy_cores=${1}
-| tc02-64B-2c-dot1ad-l2xcbase-ndrpdr
+| 64B-2c-dot1ad-l2xcbase-ndrpdr
| | [Tags] | 64B | 2C
| | frame_size=${64} | phy_cores=${2}
-| tc03-64B-4c-dot1ad-l2xcbase-ndrpdr
+| 64B-4c-dot1ad-l2xcbase-ndrpdr
| | [Tags] | 64B | 4C
| | frame_size=${64} | phy_cores=${4}
-| tc04-1518B-1c-dot1ad-l2xcbase-ndrpdr
+| 1518B-1c-dot1ad-l2xcbase-ndrpdr
| | [Tags] | 1518B | 1C
| | frame_size=${1518} | phy_cores=${1}
-| tc05-1518B-2c-dot1ad-l2xcbase-ndrpdr
+| 1518B-2c-dot1ad-l2xcbase-ndrpdr
| | [Tags] | 1518B | 2C
| | frame_size=${1518} | phy_cores=${2}
-| tc06-1518B-4c-dot1ad-l2xcbase-ndrpdr
+| 1518B-4c-dot1ad-l2xcbase-ndrpdr
| | [Tags] | 1518B | 4C
| | frame_size=${1518} | phy_cores=${4}
-| tc07-9000B-1c-dot1ad-l2xcbase-ndrpdr
+| 9000B-1c-dot1ad-l2xcbase-ndrpdr
| | [Tags] | 9000B | 1C
| | frame_size=${9000} | phy_cores=${1}
-| tc08-9000B-2c-dot1ad-l2xcbase-ndrpdr
+| 9000B-2c-dot1ad-l2xcbase-ndrpdr
| | [Tags] | 9000B | 2C
| | frame_size=${9000} | phy_cores=${2}
-| tc09-9000B-4c-dot1ad-l2xcbase-ndrpdr
+| 9000B-4c-dot1ad-l2xcbase-ndrpdr
| | [Tags] | 9000B | 4C
| | frame_size=${9000} | phy_cores=${4}
-| tc10-IMIX-1c-dot1ad-l2xcbase-ndrpdr
+| IMIX-1c-dot1ad-l2xcbase-ndrpdr
| | [Tags] | IMIX | 1C
| | frame_size=IMIX_v4_1 | phy_cores=${1}
-| tc11-IMIX-2c-dot1ad-l2xcbase-ndrpdr
+| IMIX-2c-dot1ad-l2xcbase-ndrpdr
| | [Tags] | IMIX | 2C
| | frame_size=IMIX_v4_1 | phy_cores=${2}
-| tc12-IMIX-4c-dot1ad-l2xcbase-ndrpdr
+| IMIX-4c-dot1ad-l2xcbase-ndrpdr
| | [Tags] | IMIX | 4C
| | frame_size=IMIX_v4_1 | phy_cores=${4}