| ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
| ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
| ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
-| ... | io, rxd/txd=256, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
+| ... | io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
| ... | Niantic by Intel.
| ... | *[Ver] TG verification:* TG verifies throughput PDR (Partial Drop
| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
| ... | *[Ref] Applicable standard specifications:* RFC2544.
*** Variables ***
+| ${perf_qemu_qsz}= | 1024
| ${bd_id1}= | 1
| ${bd_id2}= | 2
| ${sock1}= | /tmp/sock-1-${bd_id1}
| ${sock2}= | /tmp/sock-1-${bd_id2}
# Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
*** Keywords ***
| Check PDR for L2XC with vhost and VM with dpdk-testpmd
| | ${vm2}= | And Configure guest VM with dpdk-testpmd connected via vhost-user
| | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1
| | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
-| | Run Keyword Unless | ${qemu_built} | Set Suite Variable | ${qemu_built}
-| | ... | ${True}
| | Then Traffic should pass with partial loss | ${perf_trial_duration}
| | ... | ${rate} | ${framesize} | ${traffic_profile}
| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
*** Test Cases ***
-| tc01-64B-1t1c-eth-l2xcbase-eth-2vhost-1vm-pdrchk
+| tc01-64B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrchk
| | [Documentation]
| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy\
| | ... | core, 1 receive queue per NIC port.
| | [Template] | Check PDR for L2XC with vhost and VM with dpdk-testpmd
| | framesize=${64} | rate=1.6mpps | wt=1 | rxq=1
-| tc02-1518B-1t1c-eth-l2xcbase-eth-2vhost-1vm-pdrchk
+| tc02-1518B-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrchk
| | [Documentation]
| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy\
| | ... | core, 1 receive queue per NIC port.
| | [Template] | Check PDR for L2XC with vhost and VM with dpdk-testpmd
| | framesize=${1518} | rate=400000pps | wt=1 | rxq=1
-| tc03-IMIX-1t1c-eth-l2xcbase-eth-2vhost-1vm-pdrchk
+| tc03-IMIX-1t1c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrchk
| | [Documentation]
| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy\
| | ... | core, 1 receive queue per NIC port.
| | [Template] | Check PDR for L2XC with vhost and VM with dpdk-testpmd
| | framesize=IMIX_v4_1 | rate=1.0mpps | wt=1 | rxq=1
-| tc04-64B-2t2c-eth-l2xcbase-eth-2vhost-1vm-pdrchk
+| tc04-64B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrchk
| | [Documentation]
| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy\
| | ... | cores, 1 receive queue per NIC port.
| | [Template] | Check PDR for L2XC with vhost and VM with dpdk-testpmd
| | framesize=${64} | rate=3.0mpps | wt=2 | rxq=1
-| tc05-1518B-2t2c-eth-l2xcbase-eth-2vhost-1vm-pdrchk
+| tc05-1518B-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrchk
| | [Documentation]
| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy\
| | ... | cores, 1 receive queue per NIC port.
| | [Template] | Check PDR for L2XC with vhost and VM with dpdk-testpmd
| | framesize=${1518} | rate=0.7mpps | wt=2 | rxq=1
-| tc06-IMIX-2t2c-eth-l2xcbase-eth-2vhost-1vm-pdrchk
+| tc06-IMIX-2t2c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrchk
| | [Documentation]
| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy\
| | ... | cores, 1 receive queue per NIC port.
| | [Template] | Check PDR for L2XC with vhost and VM with dpdk-testpmd
| | framesize=IMIX_v4_1 | rate=2.0mpps | wt=2 | rxq=1
-| tc07-64B-4t4c-eth-l2xcbase-eth-2vhost-1vm-pdrchk
+| tc07-64B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrchk
| | [Documentation]
| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy\
| | ... | cores, 2 receive queues per NIC port.
| | [Template] | Check PDR for L2XC with vhost and VM with dpdk-testpmd
| | framesize=${64} | rate=4.2mpps | wt=4 | rxq=2
-| tc08-1518B-4t4c-eth-l2xcbase-eth-2vhost-1vm-pdrchk
+| tc08-1518B-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrchk
| | [Documentation]
| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy\
| | ... | cores, 2 receive queues per NIC port.
| | [Template] | Check PDR for L2XC with vhost and VM with dpdk-testpmd
| | framesize=${1518} | rate=0.7mpps | wt=4 | rxq=2
-| tc09-IMIX-4t4c-eth-l2xcbase-eth-2vhost-1vm-pdrchk
+| tc09-IMIX-4t4c-eth-l2xcbase-eth-2vhostvr1024-1vm-pdrchk
| | [Documentation]
| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy\
| | ... | cores, 2 receive queues per NIC port.