+++ /dev/null
-#
-# Sample configuration file for ISC dhcpd for Debian
-#
-# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as
-# configuration file instead of this file.
-#
-#
-
-# The ddns-updates-style parameter controls whether or not the server will
-# attempt to do a DNS update when a lease is confirmed. We default to the
-# behavior of the version 2 packages ('none', since DHCP v2 didn't
-# have support for DDNS.)
-ddns-update-style none;
-
-# option definitions common to all supported networks...
-option domain-name "example.org";
-option domain-name-servers ns1.example.org, ns2.example.org;
-
-default-lease-time 600;
-max-lease-time 7200;
-
-# If this DHCP server is the official DHCP server for the local
-# network, the authoritative directive should be uncommented.
-#authoritative;
-
-# Use this to send dhcp log messages to a different log file (you also
-# have to hack syslog.conf to complete the redirection).
-log-facility local7;
-
-# No service will be given on this subnet, but declaring it helps the
-# DHCP server to understand the network topology.
-
-#subnet 10.152.187.0 netmask 255.255.255.0 {
-#}
-
-# This is a very basic subnet declaration.
-
-#subnet 10.254.239.0 netmask 255.255.255.224 {
-# range 10.254.239.10 10.254.239.20;
-# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
-#}
-
-# This declaration allows BOOTP clients to get dynamic addresses,
-# which we don't really recommend.
-
-#subnet 10.254.239.32 netmask 255.255.255.224 {
-# range dynamic-bootp 10.254.239.40 10.254.239.60;
-# option broadcast-address 10.254.239.31;
-# option routers rtr-239-32-1.example.org;
-#}
-
-# A slightly different configuration for an internal subnet.
-#subnet 10.5.5.0 netmask 255.255.255.224 {
-# range 10.5.5.26 10.5.5.30;
-# option domain-name-servers ns1.internal.example.org;
-# option domain-name "internal.example.org";
-# option routers 10.5.5.1;
-# option broadcast-address 10.5.5.31;
-# default-lease-time 600;
-# max-lease-time 7200;
-#}
-
-# Hosts which require special configuration options can be listed in
-# host statements. If no address is specified, the address will be
-# allocated dynamically (if possible), but the host-specific information
-# will still come from the host declaration.
-
-#host passacaglia {
-# hardware ethernet 0:0:c0:5d:bd:95;
-# filename "vmunix.passacaglia";
-# server-name "toccata.fugue.com";
-#}
-
-# Fixed IP addresses can also be specified for hosts. These addresses
-# should not also be listed as being available for dynamic assignment.
-# Hosts for which fixed IP addresses have been specified can boot using
-# BOOTP or DHCP. Hosts for which no fixed address is specified can only
-# be booted with DHCP, unless there is an address range on the subnet
-# to which a BOOTP client is connected which has the dynamic-bootp flag
-# set.
-#host fantasia {
-# hardware ethernet 08:00:07:26:c0:a5;
-# fixed-address fantasia.fugue.com;
-#}
-
-# You can declare a class of clients and then do address allocation
-# based on that. The example below shows a case where all clients
-# in a certain class get addresses on the 10.17.224/24 subnet, and all
-# other clients get addresses on the 10.0.29/24 subnet.
-
-#class "foo" {
-# match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
-#}
-
-#shared-network 224-29 {
-# subnet 10.17.224.0 netmask 255.255.255.0 {
-# option routers rtr-224.example.org;
-# }
-# subnet 10.0.29.0 netmask 255.255.255.0 {
-# option routers rtr-29.example.org;
-# }
-# pool {
-# allow members of "foo";
-# range 10.17.224.10 10.17.224.250;
-# }
-# pool {
-# deny members of "foo";
-# range 10.0.29.10 10.0.29.230;
-# }
-#}
-subnet 6.0.0.0 netmask 255.255.0.0 {
- range 6.0.2.2 6.0.2.5;
- option routers 6.0.2.1;
- default-lease-time 15;
- max-lease-time 15;
-}
Code Review / vpp.git / blobdiff