/* Hey Emacs use -*- mode: C -*- */
/*
- * Copyright (c) 2015 Cisco and/or its affiliates.
+ * Copyright (c) 2015-2016 Cisco and/or its affiliates.
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
i32 retval;
};
+/** \brief Enable or Disable MPLS on and interface
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - index of the interface
+ @param enable - if non-zero enable, else disable
+*/
+define sw_interface_set_mpls_enable
+{
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u8 enable;
+};
+
+/** \brief Reply for MPLS state on an interface
+ @param context - returned sender context, to match reply w/ request
+ @param retval - return code
+*/
+define sw_interface_set_mpls_enable_reply
+{
+ u32 context;
+ i32 retval;
+};
+
/** \brief Initialize a new tap interface with the given paramters
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
u8 is_ipv6;
u8 is_local;
u8 is_classify;
- /* Is last/not-last message in group of multiple add/del messages. */
u8 is_multipath;
+ u8 is_resolve_host;
+ u8 is_resolve_attached;
+ /* Is last/not-last message in group of multiple add/del messages. */
u8 not_last;
u8 next_hop_weight;
u8 dst_address_length;
u32 vpe_pid;
};
-/** \brief Control ping from client to api server request, no print json output
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
-*/
-define noprint_control_ping
-{
- u32 client_index;
- u32 context;
-};
-
-/** \brief Control ping from the client to the server response
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param retval - return code for the request
- @param vpe_pid - the pid of the vpe, returned by the server
-*/
-define noprint_control_ping_reply
-{
- u32 context;
- i32 retval;
- u32 client_index;
- u32 vpe_pid;
-};
-
/** \brief Process a vpe parser cli string request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
u32 context;
u8 is_add;
u8 is_ipv6;
+ u8 teb;
u8 src_address[16];
u8 dst_address[16];
u32 outer_fib_id;
u32 context;
u32 sw_if_index;
u8 is_ipv6;
+ u8 teb;
u8 src_address[16];
u8 dst_address[16];
u32 outer_fib_id;
@param is_add - add address if non-zero, else delete
@param locator_set_name - locator name
@param locator_num - number of locators
- @param locators - Lisp locator data
+ @param locators - LISP locator records
+ Structure of one locator record is as follows:
+
+ define locator_t {
+ u32 sw_if_index;
+ u8 priority;
+ u8 weight;
+ }
*/
define lisp_add_del_locator_set
{
u8 is_add;
u8 locator_set_name[64];
u32 locator_num;
- u8 locators[locator_num];
+ u8 locators[0];
};
/** \brief Reply for locator_set add/del
i32 retval;
};
+/** \brief set LISP map-request mode. Based on configuration VPP will send
+ src/dest or just normal destination map requests.
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param mode - new map-request mode. Supported values are:
+ 0 - destination only
+ 1 - source/destaination
+*/
+define lisp_map_request_mode
+{
+ u32 client_index;
+ u32 context;
+ u8 mode;
+};
+
+/** \brief Reply for lisp_map_request_mode
+ @param context - returned sender context, to match reply w/ request
+ @param retval - return code
+*/
+define lisp_map_request_mode_reply
+{
+ u32 context;
+ i32 retval;
+};
+
+/** \brief Request for LISP map-request mode
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define show_lisp_map_request_mode
+{
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief Reply for show_lisp_map_request_mode
+ @param context - returned sender context, to match reply w/ request
+ @param retval - return code
+ @param mode - map-request mode
+*/
+define show_lisp_map_request_mode_reply
+{
+ u32 context;
+ i32 retval;
+ u8 mode;
+};
+
/** \brief add or delete remote static mapping
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param deid - dst EID
@param seid - src EID, valid only if is_src_dst is enabled
@param rloc_num - number of remote locators
- @param rlocs - remote locator data
+ @param rlocs - remote locator records
+ Structure of remote locator:
+
+ define rloc_t {
+ u8 is_ip4;
+ u8 priority;
+ u8 weight;
+ u8 addr[16];
+ }
*/
define lisp_add_del_remote_mapping
{
u8 seid[16];
u8 seid_len;
u32 rloc_num;
- u8 rlocs[rloc_num];
+ u8 rlocs[0];
};
/** \brief Reply for lisp_add_del_remote_mapping
0 : ipv4
1 : ipv6
2 : mac
- @param deid - destination EID
- @param seid - source EID
+ @param reid - remote EID
+ @param leid - local EID
*/
define lisp_add_del_adjacency
{
u8 is_add;
u32 vni;
u8 eid_type;
- u8 deid[16];
- u8 seid[16];
- u8 deid_len;
- u8 seid_len;
+ u8 reid[16];
+ u8 leid[16];
+ u8 reid_len;
+ u8 leid_len;
};
/** \brief Reply for lisp_add_del_adjacency
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param locator_set_index - index of locator_set
- @param filter - filter type;
- Support value:
- 0: all locator
- 1: local locator
- 2: remote locator
+ @param ls_name - locator set name
+ @param is_index_set - flag indicating whether ls_name or ls_index is set
*/
define lisp_locator_dump
{
u32 client_index;
u32 context;
- u32 locator_set_index;
- u8 filter;
+ u32 ls_index;
+ u8 ls_name[64];
+ u8 is_index_set;
};
/** \brief LISP locator_set status
};
/** \brief LISP locator_set status
- @param locator_set_name - name of the locator_set
- @param local - if is set, then locator_set is local
- @param locator_count - number of locator this stats block includes
- @param locator - locator data
+ @param context - sender context, to match reply w/ request
+ @param ls_index - locator set index
+ @param ls_name - name of the locator set
*/
define lisp_locator_set_details
{
u32 context;
- u8 local;
- u32 locator_set_index;
- u8 locator_set_name[64];
+ u32 ls_index;
+ u8 ls_name[64];
};
/** \brief Request for locator_set summary status
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
- @param filter - filter type;
- Support value:
- 0: all locator_set
- 1: local locator_set
- 2: remote locator_set
+ @param filter - filter type
+ Supported values:
+ 0: all locator sets
+ 1: local locator sets
+ 2: remote locator sets
*/
define lisp_locator_set_dump
{
0 : ipv4
1 : ipv6
2 : mac
+ @param is_src_dst - EID is type of source/destination
@param eid - EID can be ip4, ip6 or mac
- @param prefix_len - prefix len
+ @param eid_prefix_len - prefix length
+ @param seid - source EID can be ip4, ip6 or mac
+ @param seid_prefix_len - source prefix length
@param vni - virtual network instance
@param ttl - time to live
@param authoritative - authoritative
u8 action;
u8 is_local;
u8 eid_type;
+ u8 is_src_dst;
u32 vni;
u8 eid[16];
u8 eid_prefix_len;
+ u8 seid[16];
+ u8 seid_prefix_len;
u32 ttl;
u8 authoritative;
};
u8 filter;
};
+/** \brief LISP adjacency
+ @param eid_type -
+ 0 : ipv4
+ 1 : ipv6
+ 2 : mac
+ @param reid - remote EID
+ @param leid - local EID
+ @param reid_prefix_len - remote EID IP prefix length
+ @param leid_prefix_len - local EID IP prefix length
+ */
+typeonly manual_print manual_endian define lisp_adjacency
+{
+ u8 eid_type;
+ u8 reid[16];
+ u8 leid[16];
+ u8 reid_prefix_len;
+ u8 leid_prefix_len;
+};
+
+/** \brief LISP adjacency reply
+ @param count - number of adjacencies
+ @param adjacencies - array of adjacencies
+ */
+manual_endian manual_print define lisp_adjacencies_get_reply
+{
+ u32 context;
+ i32 retval;
+ u32 count;
+ vl_api_lisp_adjacency_t adjacencies[count];
+};
+
+/** \brief Request for LISP adjacencies
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param vni - filter adjacencies by VNI
+ */
+define lisp_adjacencies_get
+{
+ u32 client_index;
+ u32 context;
+ u32 vni;
+};
+
/** \brief Shows relationship between vni and vrf/bd
@param dp_table - VRF index or bridge domain index
@param vni - vitual network instance
u8 match[match_length];
};
-/** \brief Enable and configure IPFIX exporter process request
+/** \brief Configure IPFIX exporter process request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param collector_address - address of IPFIX collector
- @param collector_port - port of IPFIX IPFIX collector
+ @param collector_port - port of IPFIX collector
@param src_address - address of IPFIX exporter
@param vrf_id - VRF / fib table ID
@param path_mtu - Path MTU between exporter and collector
@param template_interval - number of seconds after which to resend template
+ @param udp_checksum - UDP checksum calculation enable flag
*/
-define ipfix_enable
+define set_ipfix_exporter
{
u32 client_index;
u32 context;
u32 vrf_id;
u32 path_mtu;
u32 template_interval;
+ u8 udp_checksum;
};
-/** \brief Reply to IPFIX enable and configure request
+/** \brief Reply to IPFIX exporter configure request
@param context - sender context which was passed in the request
*/
-define ipfix_enable_reply
+define set_ipfix_exporter_reply
{
u32 context;
i32 retval;
};
-/** \brief IPFIX dump request
+/** \brief IPFIX exporter dump request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
*/
-define ipfix_dump
+define ipfix_exporter_dump
{
u32 client_index;
u32 context;
};
-/** \brief Reply to IPFIX dump request
+/** \brief Reply to IPFIX exporter dump request
@param context - sender context which was passed in the request
@param collector_address - address of IPFIX collector
- @param collector_port - port of IPFIX IPFIX collector
+ @param collector_port - port of IPFIX collector
@param src_address - address of IPFIX exporter
@param fib_index - fib table index
@param path_mtu - Path MTU between exporter and collector
@param template_interval - number of seconds after which to resend template
+ @param udp_checksum - UDP checksum calculation enable flag
*/
-define ipfix_details
+define ipfix_exporter_details
{
u32 context;
u8 collector_address[16];
u16 collector_port;
u8 src_address[16];
- u32 fib_index;
+ u32 vrf_id;
u32 path_mtu;
u32 template_interval;
+ u8 udp_checksum;
+};
+
+/** \brief IPFIX classify stream configure request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param domain_id - domain ID reported in IPFIX messages for classify stream
+ @param src_port - source port of UDP session for classify stream
+*/
+define set_ipfix_classify_stream {
+ u32 client_index;
+ u32 context;
+ u32 domain_id;
+ u16 src_port;
+};
+
+/** \brief IPFIX classify stream configure response
+ @param context - sender context, to match reply w/ request
+ @param retval - return value for request
+*/
+define set_ipfix_classify_stream_reply {
+ u32 context;
+ i32 retval;
+};
+
+/** \brief IPFIX classify stream dump request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define ipfix_classify_stream_dump {
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief Reply to IPFIX classify stream dump request
+ @param context - sender context, to match reply w/ request
+ @param domain_id - domain ID reported in IPFIX messages for classify stream
+ @param src_port - source port of UDP session for classify stream
+*/
+define ipfix_classify_stream_details {
+ u32 context;
+ u32 domain_id;
+ u16 src_port;
+};
+
+/** \brief IPFIX add or delete classifier table request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param table_id - classifier table ID
+ @param ip_version - version of IP used in the classifier table
+ @param transport_protocol - transport protocol used in the classifier table or 255 for unspecified
+*/
+define ipfix_classify_table_add_del {
+ u32 client_index;
+ u32 context;
+ u32 table_id;
+ u8 ip_version;
+ u8 transport_protocol;
+ u8 is_add;
+};
+
+/** \brief IPFIX add classifier table response
+ @param context - sender context which was passed in the request
+*/
+define ipfix_classify_table_add_del_reply {
+ u32 context;
+ i32 retval;
+};
+
+/** \brief IPFIX classify tables dump request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define ipfix_classify_table_dump {
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief Reply to IPFIX classify tables dump request
+ @param context - sender context, to match reply w/ request
+ @param table_id - classifier table ID
+ @param ip_version - version of IP used in the classifier table
+ @param transport_protocol - transport protocol used in the classifier table or 255 for unspecified
+*/
+define ipfix_classify_table_details {
+ u32 context;
+ u32 table_id;
+ u8 ip_version;
+ u8 transport_protocol;
+};
+
+/** \brief Set/unset flow classify interface
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - interface to set/unset flow classify
+ @param ip4_table_index - ip4 classify table index (~0 for skip)
+ @param ip6_table_index - ip6 classify table index (~0 for skip)
+ @param l2_table_index - l2 classify table index (~0 for skip)
+ @param is_add - Set if non-zero, else unset
+ Note: User is recommeneded to use just one valid table_index per call.
+ (ip4_table_index, ip6_table_index, or l2_table_index)
+*/
+define flow_classify_set_interface {
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u32 ip4_table_index;
+ u32 ip6_table_index;
+ u8 is_add;
+};
+
+/** \brief Set/unset flow classify interface response
+ @param context - sender context, to match reply w/ request
+ @param retval - return value for request
+*/
+define flow_classify_set_interface_reply {
+ u32 context;
+ i32 retval;
+};
+
+/** \brief Get list of flow classify interfaces and tables
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param type - classify table type
+*/
+define flow_classify_dump {
+ u32 client_index;
+ u32 context;
+ u8 type;
+};
+
+/** \brief Flow classify operational state response.
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - software interface index
+ @param table_index - classify table index
+*/
+define flow_classify_details {
+ u32 context;
+ u32 sw_if_index;
+ u32 table_index;
};
/** \brief Query relative index via node names
u32 context;
i32 retval;
};
+
+/** \brief DPDK interface HQoS pipe profile set request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - the interface
+ @param subport - subport ID
+ @param pipe - pipe ID within its subport
+ @param profile - pipe profile ID
+*/
+define sw_interface_set_dpdk_hqos_pipe {
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u32 subport;
+ u32 pipe;
+ u32 profile;
+};
+
+/** \brief DPDK interface HQoS pipe profile set reply
+ @param context - sender context, to match reply w/ request
+ @param retval - request return code
+*/
+define sw_interface_set_dpdk_hqos_pipe_reply {
+ u32 context;
+ i32 retval;
+};
+
+/** \brief DPDK interface HQoS subport parameters set request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - the interface
+ @param subport - subport ID
+ @param tb_rate - subport token bucket rate (measured in bytes/second)
+ @param tb_size - subport token bucket size (measured in credits)
+ @param tc_rate - subport traffic class 0 .. 3 rates (measured in bytes/second)
+ @param tc_period - enforcement period for rates (measured in milliseconds)
+*/
+define sw_interface_set_dpdk_hqos_subport {
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u32 subport;
+ u32 tb_rate;
+ u32 tb_size;
+ u32 tc_rate[4];
+ u32 tc_period;
+};
+
+/** \brief DPDK interface HQoS subport parameters set reply
+ @param context - sender context, to match reply w/ request
+ @param retval - request return code
+*/
+define sw_interface_set_dpdk_hqos_subport_reply {
+ u32 context;
+ i32 retval;
+};
+
+/** \brief DPDK interface HQoS tctbl entry set request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - the interface
+ @param entry - entry index ID
+ @param tc - traffic class (0 .. 3)
+ @param queue - traffic class queue (0 .. 3)
+*/
+define sw_interface_set_dpdk_hqos_tctbl {
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u32 entry;
+ u32 tc;
+ u32 queue;
+};
+
+/** \brief DPDK interface HQoS tctbl entry set reply
+ @param context - sender context, to match reply w/ request
+ @param retval - request return code
+*/
+define sw_interface_set_dpdk_hqos_tctbl_reply {
+ u32 context;
+ i32 retval;
+};
+
+/** \brief L2 interface pbb tag rewrite configure request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - interface the operation is applied to
+ @param vtr_op - Choose from l2_vtr_op_t enum values
+ @param inner_tag - needed for translate_qinq vtr op only
+ @param outer_tag - needed for translate_qinq vtr op only
+ @param b_dmac - B-tag remote mac address, needed for any push or translate_qinq vtr op
+ @param b_smac - B-tag local mac address, needed for any push or translate qinq vtr op
+ @param b_vlanid - B-tag vlanid, needed for any push or translate qinq vtr op
+ @param i_sid - I-tag service id, needed for any push or translate qinq vtr op
+*/
+define l2_interface_pbb_tag_rewrite
+{
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u32 vtr_op;
+ u16 outer_tag;
+ u8 b_dmac[6];
+ u8 b_smac[6];
+ u16 b_vlanid;
+ u32 i_sid;
+};
+
+/** \brief L2 interface pbb tag rewrite response
+ @param context - sender context, to match reply w/ request
+ @param retval - return code for the request
+*/
+define l2_interface_pbb_tag_rewrite_reply
+{
+ u32 context;
+ i32 retval;
+};
+
+/** \brief Punt traffic to the host
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param is_add - add punt if non-zero, else delete
+ @param ipv - L3 protocol 4 - IPv4, 6 - IPv6, ~0 - All
+ @param l4_protocol - L4 protocol to be punted, only UDP (0x11) is supported
+ @param l4_port - TCP/UDP port to be punted
+*/
+define punt {
+ u32 client_index;
+ u32 context;
+ u8 is_add;
+ u8 ipv;
+ u8 l4_protocol;
+ u16 l4_port;
+};
+
+/** \brief Reply to the punt request
+ @param context - sender context which was passed in the request
+ @param retval - return code of punt request
+*/
+define punt_reply
+{
+ u32 context;
+ i32 retval;
+};
+
Code Review / vpp.git / blobdiff