* NETMAP APIs: see ... /vnet/vnet/devices/netmap/{netmap.api, netmap_api.c}
* VHOST-USER APIs: see .../vnet/devices/virtio/{vhost_user.api, vhost_user_api.c}
* VXLAN GPE APIs: see .../vnet/vnet/vxlan-gpe/{vxlan_gpe.api, vxlan_gpe_api.c}
+ * GRE APIs: see .../vnet/vnet/gre/{gre.api, gre_api.c}
+ * L2TP APIs: see .../vnet/vnet/l2tp/{l2tp.api, l2tp_api.c}
+ * BFD APIs: see .../vnet/vnet/bfd/{bfd.api, bfd_api.c}
+ * IPSEC APIs: see .../vnet/vnet/ipsec/{ipsec.api, ipsec_api.c}
+ * IPSEC-GRE APIs: see .../vnet/vnet/ipsec-gre/{ipsec_gre.api, ipsec_gre_api.c}
*/
/** \brief Create a new subinterface with the given vlan id
i32 retval;
};
-/** \brief l2tpv3 tunnel interface create request
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param client_address - remote client tunnel ip address
- @param client_address - local tunnel ip address
- @param is_ipv6 - ipv6 if non-zero, else ipv4
- @param local_session_id - local tunnel session id
- @param remote_session_id - remote tunnel session id
- @param local_cookie - local tunnel cookie
- @param l2_sublayer_present - l2 sublayer is present in packets if non-zero
- @param encap_vrf_id - fib identifier used for outgoing encapsulated packets
-*/
-define l2tpv3_create_tunnel
-{
- u32 client_index;
- u32 context;
- u8 client_address[16];
- u8 our_address[16];
- u8 is_ipv6;
- u32 local_session_id;
- u32 remote_session_id;
- u64 local_cookie;
- u64 remote_cookie;
- u8 l2_sublayer_present;
- u32 encap_vrf_id;
-};
-
-/** \brief l2tpv3 tunnel interface create response
- @param context - sender context, to match reply w/ request
- @param retval - return code for the request
- @param sw_if_index - index of the new tunnel interface
-*/
-define l2tpv3_create_tunnel_reply
-{
- u32 context;
- i32 retval;
- u32 sw_if_index;
-};
-
-define l2tpv3_set_tunnel_cookies
-{
- u32 client_index;
- u32 context;
- u32 sw_if_index;
- u64 new_local_cookie;
- u64 new_remote_cookie;
-};
-
-/** \brief L2TP tunnel set cookies response
- @param context - sender context, to match reply w/ request
- @param retval - return code for the request
-*/
-define l2tpv3_set_tunnel_cookies_reply
-{
- u32 context;
- i32 retval;
-};
-
-define sw_if_l2tpv3_tunnel_details
-{
- u32 context;
- u32 sw_if_index;
- u8 interface_name[64];
- u8 client_address[16];
- u8 our_address[16];
- u32 local_session_id;
- u32 remote_session_id;
- u64 local_cookie[2];
- u64 remote_cookie;
- u8 l2_sublayer_present;
-};
-
-define sw_if_l2tpv3_tunnel_dump
-{
- u32 client_index;
- u32 context;
-};
-
/** \brief L2 fib clear table request, clear all mac entries in the l2 fib
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
i32 retval;
};
-define l2tpv3_interface_enable_disable
-{
- u32 client_index;
- u32 context;
- u8 enable_disable;
- u32 sw_if_index;
-};
-
-define l2tpv3_interface_enable_disable_reply
-{
- u32 context;
- i32 retval;
-};
-
-define l2tpv3_set_lookup_key
-{
- u32 client_index;
- u32 context;
- /* 0 = ip6 src_address, 1 = ip6 dst_address, 2 = session_id */
- u8 key;
-};
-
-define l2tpv3_set_lookup_key_reply
-{
- u32 context;
- i32 retval;
-};
-
-define gre_add_del_tunnel
-{
- u32 client_index;
- u32 context;
- u8 is_add;
- u8 is_ipv6;
- u8 teb;
- u8 src_address[16];
- u8 dst_address[16];
- u32 outer_fib_id;
-};
-
-define gre_add_del_tunnel_reply
-{
- u32 context;
- i32 retval;
- u32 sw_if_index;
-};
-
-define gre_tunnel_dump
-{
- u32 client_index;
- u32 context;
- u32 sw_if_index;
-};
-
-define gre_tunnel_details
-{
- u32 context;
- u32 sw_if_index;
- u8 is_ipv6;
- u8 teb;
- u8 src_address[16];
- u8 dst_address[16];
- u32 outer_fib_id;
-};
-
/** \brief L2 interface vlan tag rewrite configure request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
i32 retval;
};
-/** \brief IPsec: Add/delete Security Policy Database
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param is_add - add SPD if non-zero, else delete
- @param spd_id - SPD instance id (control plane allocated)
-*/
-
-define ipsec_spd_add_del
-{
- u32 client_index;
- u32 context;
- u8 is_add;
- u32 spd_id;
-};
-
-/** \brief Reply for IPsec: Add/delete Security Policy Database entry
- @param context - returned sender context, to match reply w/ request
- @param retval - return code
-*/
-
-define ipsec_spd_add_del_reply
-{
- u32 context;
- i32 retval;
-};
-
-/** \brief IPsec: Add/delete SPD from interface
-
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param is_add - add security mode if non-zero, else delete
- @param sw_if_index - index of the interface
- @param spd_id - SPD instance id to use for lookups
-*/
-
-
-define ipsec_interface_add_del_spd
-{
- u32 client_index;
- u32 context;
-
- u8 is_add;
- u32 sw_if_index;
- u32 spd_id;
-};
-
-/** \brief Reply for IPsec: Add/delete SPD from interface
- @param context - returned sender context, to match reply w/ request
- @param retval - return code
-*/
-
-define ipsec_interface_add_del_spd_reply
-{
- u32 context;
- i32 retval;
-};
-
-/** \brief IPsec: Add/delete Security Policy Database entry
-
- See RFC 4301, 4.4.1.1 on how to match packet to selectors
-
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param is_add - add SPD if non-zero, else delete
- @param spd_id - SPD instance id (control plane allocated)
- @param priority - priority of SPD entry (non-unique value). Used to order SPD matching - higher priorities match before lower
- @param is_outbound - entry applies to outbound traffic if non-zero, otherwise applies to inbound traffic
- @param is_ipv6 - remote/local address are IPv6 if non-zero, else IPv4
- @param remote_address_start - start of remote address range to match
- @param remote_address_stop - end of remote address range to match
- @param local_address_start - start of local address range to match
- @param local_address_stop - end of local address range to match
- @param protocol - protocol type to match [0 means any]
- @param remote_port_start - start of remote port range to match ...
- @param remote_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE]
- @param local_port_start - start of local port range to match ...
- @param local_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE]
- @param policy - 0 = bypass (no IPsec processing), 1 = discard (discard packet with ICMP processing), 2 = resolve (send request to control plane for SA resolving, and discard without ICMP processing), 3 = protect (apply IPsec policy using following parameters)
- @param sa_id - SAD instance id (control plane allocated)
-
-*/
-
-define ipsec_spd_add_del_entry
-{
- u32 client_index;
- u32 context;
- u8 is_add;
-
- u32 spd_id;
- i32 priority;
- u8 is_outbound;
-
- // Selector
- u8 is_ipv6;
- u8 is_ip_any;
- u8 remote_address_start[16];
- u8 remote_address_stop[16];
- u8 local_address_start[16];
- u8 local_address_stop[16];
-
- u8 protocol;
-
- u16 remote_port_start;
- u16 remote_port_stop;
- u16 local_port_start;
- u16 local_port_stop;
-
- // Policy
- u8 policy;
- u32 sa_id;
-};
-
-/** \brief Reply for IPsec: Add/delete Security Policy Database entry
- @param context - returned sender context, to match reply w/ request
- @param retval - return code
-*/
-
-define ipsec_spd_add_del_entry_reply
-{
- u32 context;
- i32 retval;
-};
-
-/** \brief IPsec: Add/delete Security Association Database entry
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param is_add - add SAD entry if non-zero, else delete
-
- @param sad_id - sad id
-
- @param spi - security parameter index
-
- @param protocol - 0 = AH, 1 = ESP
-
- @param crypto_algorithm - 0 = Null, 1 = AES-CBC-128, 2 = AES-CBC-192, 3 = AES-CBC-256, 4 = 3DES-CBC
- @param crypto_key_length - length of crypto_key in bytes
- @param crypto_key - crypto keying material
-
- @param integrity_algorithm - 0 = None, 1 = MD5-96, 2 = SHA1-96, 3 = SHA-256, 4 = SHA-384, 5=SHA-512
- @param integrity_key_length - length of integrity_key in bytes
- @param integrity_key - integrity keying material
-
- @param use_extended_sequence_number - use ESN when non-zero
-
- @param is_tunnel - IPsec tunnel mode if non-zero, else transport mode
- @param is_tunnel_ipv6 - IPsec tunnel mode is IPv6 if non-zero, else IPv4 tunnel only valid if is_tunnel is non-zero
- @param tunnel_src_address - IPsec tunnel source address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero
- @param tunnel_dst_address - IPsec tunnel destination address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero
-
- To be added:
- Anti-replay
- IPsec tunnel address copy mode (to support GDOI)
- */
-
-define ipsec_sad_add_del_entry
-{
- u32 client_index;
- u32 context;
- u8 is_add;
-
- u32 sad_id;
-
- u32 spi;
-
- u8 protocol;
-
- u8 crypto_algorithm;
- u8 crypto_key_length;
- u8 crypto_key[128];
-
- u8 integrity_algorithm;
- u8 integrity_key_length;
- u8 integrity_key[128];
-
- u8 use_extended_sequence_number;
-
- u8 is_tunnel;
- u8 is_tunnel_ipv6;
- u8 tunnel_src_address[16];
- u8 tunnel_dst_address[16];
-};
-
-/** \brief Reply for IPsec: Add/delete Security Association Database entry
- @param context - returned sender context, to match reply w/ request
- @param retval - return code
-*/
-
-define ipsec_sad_add_del_entry_reply
-{
- u32 context;
- i32 retval;
-};
-
-/** \brief IPsec: Update Security Association keys
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
-
- @param sa_id - sa id
-
- @param crypto_key_length - length of crypto_key in bytes
- @param crypto_key - crypto keying material
-
- @param integrity_key_length - length of integrity_key in bytes
- @param integrity_key - integrity keying material
-*/
-
-define ipsec_sa_set_key
-{
- u32 client_index;
- u32 context;
-
- u32 sa_id;
-
- u8 crypto_key_length;
- u8 crypto_key[128];
-
- u8 integrity_key_length;
- u8 integrity_key[128];
-};
-
-/** \brief Reply for IPsec: Update Security Association keys
- @param context - returned sender context, to match reply w/ request
- @param retval - return code
-*/
-
-define ipsec_sa_set_key_reply
-{
- u32 context;
- i32 retval;
-};
-
-/** \brief IKEv2: Add/delete profile
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
-
- @param name - IKEv2 profile name
- @param is_add - Add IKEv2 profile if non-zero, else delete
-*/
-define ikev2_profile_add_del
-{
- u32 client_index;
- u32 context;
-
- u8 name[64];
- u8 is_add;
-};
-
-/** \brief Reply for IKEv2: Add/delete profile
- @param context - returned sender context, to match reply w/ request
- @param retval - return code
-*/
-define ikev2_profile_add_del_reply
-{
- u32 context;
- i32 retval;
-};
-
-/** \brief IKEv2: Set IKEv2 profile authentication method
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
-
- @param name - IKEv2 profile name
- @param auth_method - IKEv2 authentication method (shared-key-mic/rsa-sig)
- @param is_hex - Authentication data in hex format if non-zero, else string
- @param data_len - Authentication data length
- @param data - Authentication data (for rsa-sig cert file path)
-*/
-define ikev2_profile_set_auth
-{
- u32 client_index;
- u32 context;
-
- u8 name[64];
- u8 auth_method;
- u8 is_hex;
- u32 data_len;
- u8 data[0];
-};
-
-/** \brief Reply for IKEv2: Set IKEv2 profile authentication method
- @param context - returned sender context, to match reply w/ request
- @param retval - return code
-*/
-define ikev2_profile_set_auth_reply
-{
- u32 context;
- i32 retval;
-};
-
-/** \brief IKEv2: Set IKEv2 profile local/remote identification
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
-
- @param name - IKEv2 profile name
- @param is_local - Identification is local if non-zero, else remote
- @param id_type - Identification type
- @param data_len - Identification data length
- @param data - Identification data
-*/
-define ikev2_profile_set_id
-{
- u32 client_index;
- u32 context;
-
- u8 name[64];
- u8 is_local;
- u8 id_type;
- u32 data_len;
- u8 data[0];
-};
-
-/** \brief Reply for IKEv2:
- @param context - returned sender context, to match reply w/ request
- @param retval - return code
-*/
-define ikev2_profile_set_id_reply
-{
- u32 context;
- i32 retval;
-};
-
-/** \brief IKEv2: Set IKEv2 profile traffic selector parameters
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
-
- @param name - IKEv2 profile name
- @param is_local - Traffic selector is local if non-zero, else remote
- @param proto - Traffic selector IP protocol (if zero not relevant)
- @param start_port - The smallest port number allowed by traffic selector
- @param end_port - The largest port number allowed by traffic selector
- @param start_addr - The smallest address included in traffic selector
- @param end_addr - The largest address included in traffic selector
-*/
-define ikev2_profile_set_ts
-{
- u32 client_index;
- u32 context;
-
- u8 name[64];
- u8 is_local;
- u8 proto;
- u16 start_port;
- u16 end_port;
- u32 start_addr;
- u32 end_addr;
-};
-
-/** \brief Reply for IKEv2: Set IKEv2 profile traffic selector parameters
- @param context - returned sender context, to match reply w/ request
- @param retval - return code
-*/
-define ikev2_profile_set_ts_reply
-{
- u32 context;
- i32 retval;
-};
-
-/** \brief IKEv2: Set IKEv2 local RSA private key
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
-
- @param key_file - Key file absolute path
-*/
-define ikev2_set_local_key
-{
- u32 client_index;
- u32 context;
-
- u8 key_file[256];
-};
-
-/** \brief Reply for IKEv2: Set IKEv2 local key
- @param context - returned sender context, to match reply w/ request
- @param retval - return code
-*/
-define ikev2_set_local_key_reply
-{
- u32 context;
- i32 retval;
-};
-
/** \brief Tell client about a DHCP completion event
@param client_index - opaque cookie to identify the sender
@param pid - client pid registered to receive notification
i32 retval;
};
-/** \brief Add / del ipsec gre tunnel request
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param local_sa_id - local SA id
- @param remote_sa_id - remote SA id
- @param is_add - 1 if adding the tunnel, 0 if deleting
- @param src_address - tunnel source address
- @param dst_address - tunnel destination address
-*/
-define ipsec_gre_add_del_tunnel {
- u32 client_index;
- u32 context;
- u32 local_sa_id;
- u32 remote_sa_id;
- u8 is_add;
- u8 src_address[4];
- u8 dst_address[4];
-};
-
-/** \brief Reply for add / del ipsec gre tunnel request
- @param context - returned sender context, to match reply w/ request
- @param retval - return code
- @param sw_if_index - software index of the new ipsec gre tunnel
-*/
-define ipsec_gre_add_del_tunnel_reply {
- u32 context;
- i32 retval;
- u32 sw_if_index;
-};
-
-/** \brief Dump ipsec gre tunnel table
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param tunnel_index - gre tunnel identifier or -1 in case of all tunnels
-*/
-define ipsec_gre_tunnel_dump {
- u32 client_index;
- u32 context;
- u32 sw_if_index;
-};
-
-/** \brief mpls gre tunnel operational state response
- @param context - returned sender context, to match reply w/ request
- @param sw_if_index - software index of the ipsec gre tunnel
- @param local_sa_id - local SA id
- @param remote_sa_id - remote SA id
- @param src_address - tunnel source address
- @param dst_address - tunnel destination address
-*/
-define ipsec_gre_tunnel_details {
- u32 context;
- u32 sw_if_index;
- u32 local_sa_id;
- u32 remote_sa_id;
- u8 src_address[4];
- u8 dst_address[4];
-};
-
/** \brief Delete sub interface request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
i32 retval;
};
-/** \brief Dump ipsec policy database data
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param spd_id - SPD instance id
- @param sa_id - SA id, optional, set to ~0 to see all policies in SPD
-*/
-define ipsec_spd_dump {
- u32 client_index;
- u32 context;
- u32 spd_id;
- u32 sa_id;
-};
-
-/** \brief IPsec policy database response
- @param context - sender context which was passed in the request
- @param spd_id - SPD instance id
- @param priority - numeric value to control policy evaluation order
- @param is_outbound - [1|0] to indicate if direction is [out|in]bound
- @param is_ipv6 - [1|0] to indicate if address family is ipv[6|4]
- @param local_start_addr - first address in local traffic selector range
- @param local_stop_addr - last address in local traffic selector range
- @param local_start_port - first port in local traffic selector range
- @param local_stop_port - last port in local traffic selector range
- @param remote_start_addr - first address in remote traffic selector range
- @param remote_stop_addr - last address in remote traffic selector range
- @param remote_start_port - first port in remote traffic selector range
- @param remote_stop_port - last port in remote traffic selector range
- @param protocol - traffic selector protocol
- @param policy - policy action
- @param sa_id - SA id
- @param bytes - byte count of packets matching this policy
- @param packets - count of packets matching this policy
-*/
-
-define ipsec_spd_details {
- u32 context;
- u32 spd_id;
- i32 priority;
- u8 is_outbound;
- u8 is_ipv6;
- u8 local_start_addr[16];
- u8 local_stop_addr[16];
- u16 local_start_port;
- u16 local_stop_port;
- u8 remote_start_addr[16];
- u8 remote_stop_addr[16];
- u16 remote_start_port;
- u16 remote_stop_port;
- u8 protocol;
- u8 policy;
- u32 sa_id;
- u64 bytes;
- u64 packets;
-};
-
/** \brief Feature path enable/disable request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
i32 retval;
};
-/** \brief Configure BFD feature
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param slow_timer - slow timer (seconds)
- @param min_tx - desired min tx interval
- @param min_rx - desired min rx interval
- @param detect_mult - desired detection multiplier
-*/
-define bfd_set_config {
- u32 client_index;
- u32 context;
- u32 slow_timer;
- u32 min_tx;
- u32 min_rx;
- u8 detect_mult;
-};
-
-/** \brief Configure BFD feature response
- @param context - sender context, to match reply w/ request
- @param retval - return code for the request
-*/
-define bfd_set_config_reply {
- u32 context;
- i32 retval;
-};
-
-/** \brief Get BFD configuration
-*/
-define bfd_get_config {
- u32 client_index;
- u32 context;
-};
-
-/** \brief Get BFD configuration response
- @param context - sender context, to match reply w/ request
- @param retval - return code for the request
- @param slow_timer - slow timer (seconds)
- @param min_tx - desired min tx interval
- @param min_rx - desired min rx interval
- @param detect_mult - desired detection multiplier
-*/
-define bfd_get_config_reply {
- u32 client_index;
- u32 context;
- u32 slow_timer;
- u32 min_tx;
- u32 min_rx;
- u8 detect_mult;
-};
-
-/** \brief Add UDP BFD session on interface
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param sw_if_index - sw index of the interface
- @param desired_min_tx - desired min transmit interval (microseconds)
- @param required_min_rx - required min receive interval (microseconds)
- @param detect_mult - detect multiplier (# of packets missed between connection goes down)
- @param local_addr - local address
- @param peer_addr - peer address
- @param is_ipv6 - local_addr, peer_addr are IPv6 if non-zero, otherwise IPv4
-*/
-define bfd_udp_add {
- u32 client_index;
- u32 context;
- u32 sw_if_index;
- u32 desired_min_tx;
- u32 required_min_rx;
- u8 local_addr[16];
- u8 peer_addr[16];
- u8 is_ipv6;
- u8 detect_mult;
-};
-
-/** \brief Add UDP BFD session response
- @param context - sender context, to match reply w/ request
- @param retval - return code for the request
- @param bs_index - index of the session created
-*/
-define bfd_udp_add_reply {
- u32 context;
- i32 retval;
- u32 bs_index;
-};
-
-/** \brief Delete UDP BFD session on interface
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param sw_if_index - sw index of the interface
- @param local_addr - local address
- @param peer_addr - peer address
- @param is_ipv6 - local_addr, peer_addr are IPv6 if non-zero, otherwise IPv4
-*/
-define bfd_udp_del {
- u32 client_index;
- u32 context;
- u32 sw_if_index;
- u8 local_addr[16];
- u8 peer_addr[16];
- u8 is_ipv6;
-};
-
-/** \brief Delete UDP BFD session response
- @param context - sender context, to match reply w/ request
- @param retval - return code for the request
-*/
-define bfd_udp_del_reply {
- u32 context;
- i32 retval;
-};
-
-/** \brief Get all BFD sessions
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
-*/
-define bfd_udp_session_dump {
- u32 client_index;
- u32 context;
-};
-
-/** \brief BFD session details structure
- @param context - sender context, to match reply w/ request
- @param bs_index - index of the session
- @param sw_if_index - sw index of the interface
- @param local_addr - local address
- @param peer_addr - peer address
- @param is_ipv6 - local_addr, peer_addr are IPv6 if non-zero, otherwise IPv4
- @param state - session state
-*/
-define bfd_udp_session_details {
- u32 context;
- u32 bs_index;
- u32 sw_if_index;
- u8 local_addr[16];
- u8 peer_addr[16];
- u8 is_ipv6;
- u8 state;
-};
-
-/** \brief Set flags of BFD session
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param bs_index - index of the bfd session to set flags on
- @param admin_up_down - set the admin state, 1 = up, 0 = down
-*/
-define bfd_session_set_flags {
- u32 client_index;
- u32 context;
- u32 bs_index;
- u8 admin_up_down;
-};
-
-/** \brief Reply to bfd_session_set_flags
- @param context - sender context which was passed in the request
- @param retval - return code of the set flags request
-*/
-define bfd_session_set_flags_reply
-{
- u32 context;
- i32 retval;
-};
-
-/** \brief Register for BFD events
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param enable_disable - 1 => register for events, 0 => cancel registration
- @param pid - sender's pid
-*/
-define want_bfd_events
-{
- u32 client_index;
- u32 context;
- u32 enable_disable;
- u32 pid;
-};
-
-/** \brief Reply for BFD events registration
- @param context - returned sender context, to match reply w/ request
- @param retval - return code
-*/
-define want_bfd_events_reply
-{
- u32 context;
- i32 retval;
-};
-
/*
* Local Variables:
* eval: (c-set-style "gnu")
Code Review / vpp.git / blobdiff