/* Hey Emacs use -*- mode: C -*- */
/*
- * Copyright (c) 2015 Cisco and/or its affiliates.
+ * Copyright (c) 2015-2016 Cisco and/or its affiliates.
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
i32 retval;
};
+/** \brief Enable or Disable MPLS on and interface
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - index of the interface
+ @param enable - if non-zero enable, else disable
+*/
+define sw_interface_set_mpls_enable
+{
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u8 enable;
+};
+
+/** \brief Reply for MPLS state on an interface
+ @param context - returned sender context, to match reply w/ request
+ @param retval - return code
+*/
+define sw_interface_set_mpls_enable_reply
+{
+ u32 context;
+ i32 retval;
+};
+
/** \brief Initialize a new tap interface with the given paramters
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
u32 sw_if_index;
};
+/** \brief MPLS Route Add / del route
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param mr_label - The MPLS label value
+ @param mr_eos - The End of stack bit
+ @param mr_table_id - The MPLS table-id the route is added in
+ @param mr_classify_table_index - If this is a classify route,
+ this is the classify table index
+ @param mr_create_table_if_needed - If the MPLS or IP tables do not exist,
+ create them
+ @param mr_is_add - Is this a route add or delete
+ @param mr_is_classify - Is this route result a classify
+ @param mr_is_multipath - Is this route update a multipath - i.e. is this
+ a path addition to an existing route
+ @param mr_is_resolve_host - Recurse resolution constraint via a host prefix
+ @param mr_is_resolve_attached - Recurse resolution constraint via attached prefix
+ @param mr_next_hop_proto_is_ip4 - The next-hop is IPV4
+ @param mr_next_hop_weight - The weight, for UCMP
+ @param mr_next_hop[16] - the nextop address
+ @param mr_next_hop_sw_if_index - the next-hop SW interface
+ @param mr_next_hop_table_id - the next-hop table-id (if appropriate)
+ @param mr_next_hop_out_label - the next-hop output label
+*/
+define mpls_route_add_del
+{
+ u32 client_index;
+ u32 context;
+ u32 mr_label;
+ u8 mr_eos;
+ u32 mr_table_id;
+ u32 mr_classify_table_index;
+ u8 mr_create_table_if_needed;
+ u8 mr_is_add;
+ u8 mr_is_classify;
+ u8 mr_is_multipath;
+ u8 mr_is_resolve_host;
+ u8 mr_is_resolve_attached;
+ u8 mr_next_hop_proto_is_ip4;
+ u8 mr_next_hop_weight;
+ u8 mr_next_hop[16];
+ u32 mr_next_hop_sw_if_index;
+ u32 mr_next_hop_table_id;
+ u32 mr_next_hop_out_label;
+};
+
+/** \brief Reply for MPLS route add / del request
+ @param context - returned sender context, to match reply w/ request
+ @param retval - return code
+*/
+define mpls_route_add_del_reply
+{
+ u32 context;
+ i32 retval;
+};
+
+/** \brief Dump MPLS fib table
+ @param client_index - opaque cookie to identify the sender
+*/
+define mpls_fib_dump
+{
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief FIB path
+ @param sw_if_index - index of the interface
+ @param weight - The weight, for UCMP
+ @param is_local - local if non-zero, else remote
+ @param is_drop - Drop the packet
+ @param is_unreach - Drop the packet and rate limit send ICMP unreachable
+ @param is_prohibit - Drop the packet and rate limit send ICMP prohibited
+ @param afi - the afi of the next hop, IP46_TYPE_IP4=1, IP46_TYPE_IP6=2
+ @param next_hop[16] - the next hop address
+*/
+typeonly manual_print manual_endian define fib_path
+{
+ u32 sw_if_index;
+ u32 weight;
+ u8 is_local;
+ u8 is_drop;
+ u8 is_unreach;
+ u8 is_prohibit;
+ u8 afi;
+ u8 next_hop[16];
+};
+
+/** \brief mpls FIB table response
+ @param table_id - MPLS fib table id
+ @param s_bit - End-of-stack bit
+ @param label - MPLS label value
+ @param count - the number of fib_path in path
+ @param path - array of of fib_path structures
+*/
+manual_endian manual_print define mpls_fib_details
+{
+ u32 context;
+ u32 table_id;
+ u8 eos_bit;
+ u32 label;
+ u32 count;
+ vl_api_fib_path_t path[count];
+};
+
+/** \brief Dump IP6 fib table
+ @param client_index - opaque cookie to identify the sender
+*/
+define ip6_fib_dump
+{
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief IP6 FIB table response
+ @param table_id - IP6 fib table id
+ @address_length - mask length
+ @address - ip6 prefix
+ @param count - the number of fib_path in path
+ @param path - array of of fib_path structures
+*/
+manual_endian manual_print define ip6_fib_details
+{
+ u32 context;
+ u32 table_id;
+ u8 address_length;
+ u8 address[16];
+ u32 count;
+ vl_api_fib_path_t path[count];
+};
+
+/** \brief Dump IP fib table
+ @param client_index - opaque cookie to identify the sender
+*/
+define ip_fib_dump
+{
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief IP FIB table response
+ @param table_id - IP fib table id
+ @address_length - mask length
+ @address - ip4 prefix
+ @param count - the number of fib_path in path
+ @param path - array of of fib_path structures
+*/
+manual_endian manual_print define ip_fib_details
+{
+ u32 context;
+ u32 table_id;
+ u8 address_length;
+ u8 address[4];
+ u32 count;
+ vl_api_fib_path_t path[count];
+};
+
+/** \brief Bind/Unbind an MPLS local label to an IP prefix. i.e. create
+ a per-prefix label entry.
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param mb_mpls_table_id - The MPLS table-id the MPLS entry will be added in
+ @param mb_label - The MPLS label value to bind
+ @param mb_ip_table_id - The IP table-id of the IP prefix to bind to.
+ @param mb_create_table_if_needed - Create either/both tables if required.
+ @param mb_is_bind - Bind or unbind
+ @param mb_is_ip4 - The prefix to bind to is IPv4
+ @param mb_address_length - Length of IP prefix
+ @param mb_address[16] - IP prefix/
+*/
+define mpls_ip_bind_unbind
+{
+ u32 client_index;
+ u32 context;
+ u32 mb_mpls_table_id;
+ u32 mb_label;
+ u32 mb_ip_table_id;
+ u8 mb_create_table_if_needed;
+ u8 mb_is_bind;
+ u8 mb_is_ip4;
+ u8 mb_address_length;
+ u8 mb_address[16];
+};
+
+/** \brief Reply for MPLS IP bind/unbind request
+ @param context - returned sender context, to match reply w/ request
+ @param retval - return code
+*/
+define mpls_ip_bind_unbind_reply
+{
+ u32 context;
+ i32 retval;
+};
+
/** \brief Add / del route request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param create_vrf_if_needed -
@param resolve_if_needed -
@param is_add - 1 if adding the route, 0 if deleting
- @param is_drop -
+ @param is_drop - Drop the packet
+ @param is_unreach - Drop the packet and rate limit send ICMP unreachable
+ @param is_prohibit - Drop the packet and rate limit send ICMP prohibited
@param is_ipv6 - 0 if an ip4 route, else ip6
@param is_local -
@param is_classify -
u32 client_index;
u32 context;
u32 next_hop_sw_if_index;
- u32 vrf_id;
- u32 lookup_in_vrf;
+ u32 table_id;
u32 resolve_attempts;
u32 classify_table_index;
+ u32 next_hop_out_label;
+ u32 next_hop_table_id;
u8 create_vrf_if_needed;
u8 resolve_if_needed;
u8 is_add;
u8 is_drop;
+ u8 is_unreach;
+ u8 is_prohibit;
u8 is_ipv6;
u8 is_local;
u8 is_classify;
- /* Is last/not-last message in group of multiple add/del messages. */
u8 is_multipath;
+ u8 is_resolve_host;
+ u8 is_resolve_attached;
+ /* Is last/not-last message in group of multiple add/del messages. */
u8 not_last;
u8 next_hop_weight;
u8 dst_address_length;
i32 retval;
};
-/* works */
-/** \brief Add / del gre tunnel request
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param sw_if_index - software index of the new vlan's parent interface
- @param inner_vrf_id -
- @param outer_vrf_id -
- @param is_add - 1 if adding the tunnel, 0 if deleting
- @param src_address[4] - tunnel source address
- @param dst_address[4] - tunnel destination address
- @param intf_address -
- @param intf_address_length -
-*/
-define mpls_gre_add_del_tunnel
-{
- u32 client_index;
- u32 context;
- u32 inner_vrf_id;
- u32 outer_vrf_id;
- u8 is_add;
- u8 l2_only;
- u8 src_address[4];
- u8 dst_address[4];
- u8 intfc_address[4];
- u8 intfc_address_length;
-};
-
-/** \brief Reply for add / del tunnel request
- @param context - returned sender context, to match reply w/ request
- @param retval - return code
-*/
-define mpls_gre_add_del_tunnel_reply
-{
- u32 context;
- i32 retval;
- u32 tunnel_sw_if_index;
-};
-
/** \brief Add / del MPLS encapsulation request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
i32 retval;
};
-/** \brief Add / del MPLS decapsulation request
- @param client_index - opaque cookie to identify the sender
- @param context - sender context, to match reply w/ request
- @param rx_vrf_id - receive vrf
- @param tx_vrf_id - transmit vrf
- @param label -
- @param next_index -
- @param s_bit -
- @param is_add - 1 if adding the encap, 0 if deleting
-*/
-define mpls_add_del_decap
-{
- u32 client_index;
- u32 context;
- u32 rx_vrf_id;
- u32 tx_vrf_id;
- u32 label;
- u32 next_index;
- u8 s_bit;
- u8 is_add;
-};
-
-/** \brief Reply for MPLS decap add / del request
- @param context - returned sender context, to match reply w/ request
- @param retval - return code
-*/
-define mpls_add_del_decap_reply
-{
- u32 context;
- i32 retval;
-};
-
/** \brief Proxy ARP add / del request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
u32 context;
u8 is_add;
u8 is_ipv6;
+ u8 teb;
u8 src_address[16];
u8 dst_address[16];
u32 outer_fib_id;
u32 context;
u32 sw_if_index;
u8 is_ipv6;
+ u8 teb;
u8 src_address[16];
u8 dst_address[16];
u32 outer_fib_id;
@param is_add - add address if non-zero, else delete
@param locator_set_name - locator name
@param locator_num - number of locators
- @param locators - Lisp locator data
+ @param locators - LISP locator records
+ Structure of one locator record is as follows:
+
+ define locator_t {
+ u32 sw_if_index;
+ u8 priority;
+ u8 weight;
+ }
*/
define lisp_add_del_locator_set
{
u8 is_add;
u8 locator_set_name[64];
u32 locator_num;
- u8 locators[locator_num];
+ u8 locators[0];
};
/** \brief Reply for locator_set add/del
i32 retval;
};
+/** \brief set LISP map-request mode. Based on configuration VPP will send
+ src/dest or just normal destination map requests.
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param mode - new map-request mode. Supported values are:
+ 0 - destination only
+ 1 - source/destaination
+*/
+define lisp_map_request_mode
+{
+ u32 client_index;
+ u32 context;
+ u8 mode;
+};
+
+/** \brief Reply for lisp_map_request_mode
+ @param context - returned sender context, to match reply w/ request
+ @param retval - return code
+*/
+define lisp_map_request_mode_reply
+{
+ u32 context;
+ i32 retval;
+};
+
+/** \brief Request for LISP map-request mode
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+*/
+define show_lisp_map_request_mode
+{
+ u32 client_index;
+ u32 context;
+};
+
+/** \brief Reply for show_lisp_map_request_mode
+ @param context - returned sender context, to match reply w/ request
+ @param retval - return code
+ @param mode - map-request mode
+*/
+define show_lisp_map_request_mode_reply
+{
+ u32 context;
+ i32 retval;
+ u8 mode;
+};
+
/** \brief add or delete remote static mapping
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
@param deid - dst EID
@param seid - src EID, valid only if is_src_dst is enabled
@param rloc_num - number of remote locators
- @param rlocs - remote locator data
+ @param rlocs - remote locator records
+ Structure of remote locator:
+
+ define rloc_t {
+ u8 is_ip4;
+ u8 priority;
+ u8 weight;
+ u8 addr[16];
+ }
*/
define lisp_add_del_remote_mapping
{
u8 seid[16];
u8 seid_len;
u32 rloc_num;
- u8 rlocs[rloc_num];
+ u8 rlocs[0];
};
/** \brief Reply for lisp_add_del_remote_mapping
0 : ipv4
1 : ipv6
2 : mac
- @param deid - destination EID
- @param seid - source EID
+ @param reid - remote EID
+ @param leid - local EID
*/
define lisp_add_del_adjacency
{
u8 is_add;
u32 vni;
u8 eid_type;
- u8 deid[16];
- u8 seid[16];
- u8 deid_len;
- u8 seid_len;
+ u8 reid[16];
+ u8 leid[16];
+ u8 reid_len;
+ u8 leid_len;
};
/** \brief Reply for lisp_add_del_adjacency
u8 filter;
};
+/** \brief LISP adjacency
+ @param eid_type -
+ 0 : ipv4
+ 1 : ipv6
+ 2 : mac
+ @param reid - remote EID
+ @param leid - local EID
+ @param reid_prefix_len - remote EID IP prefix length
+ @param leid_prefix_len - local EID IP prefix length
+ */
+typeonly manual_print manual_endian define lisp_adjacency
+{
+ u8 eid_type;
+ u8 reid[16];
+ u8 leid[16];
+ u8 reid_prefix_len;
+ u8 leid_prefix_len;
+};
+
+/** \brief LISP adjacency reply
+ @param count - number of adjacencies
+ @param adjacencies - array of adjacencies
+ */
+manual_endian manual_print define lisp_adjacencies_get_reply
+{
+ u32 context;
+ i32 retval;
+ u32 count;
+ vl_api_lisp_adjacency_t adjacencies[count];
+};
+
+/** \brief Request for LISP adjacencies
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param vni - filter adjacencies by VNI
+ */
+define lisp_adjacencies_get
+{
+ u32 client_index;
+ u32 context;
+ u32 vni;
+};
+
/** \brief Shows relationship between vni and vrf/bd
@param dp_table - VRF index or bridge domain index
@param vni - vitual network instance
/** \brief IOAM enable : Enable in-band OAM
@param id - profile id
- @param trace_ppc - Trace PPC (none/encap/decap)
+ @param seqno - To enable Seqno Processing
+ @param analyse - Enabling analysis of iOAM at decap node
@param pow_enable - Proof of Work enabled or not flag
@param trace_enable - iOAM Trace enabled or not flag
*/
u32 client_index;
u32 context;
u16 id;
- u8 trace_ppc;
- u8 pow_enable;
+ u8 seqno;
+ u8 analyse;
+ u8 pot_enable;
u8 trace_enable;
u32 node_id;
};
u32 labels[nlabels];
};
-/** \brief Dump mpls fib decap table
- @param client_index - opaque cookie to identify the sender
- @param fib_index - mpls fib entry identifier or -1 in case of all entries
-*/
-define mpls_fib_decap_dump
-{
- u32 client_index;
- u32 context;
-};
-
-/** \brief mpls fib decap table response
- @param fib_index - fib table id
- @param entry_index - reference to mpls label table
- @param dest - destination ipv4 addr
- @param s_bit -
- @param label - mpls labels
- @param rx_table_id - rx fib id
- @param tx_table_id - tx fib id
- @param swif_tag -
-*/
-define mpls_fib_decap_details
-{
- u32 context;
-
- u32 fib_index;
- u32 entry_index;
- u32 dest;
- u32 s_bit;
- u32 label;
- u32 rx_table_id;
- u32 tx_table_id;
- u8 swif_tag[8];
-};
-
/** \brief Classify get table IDs request
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
u8 transport_protocol;
};
+/** \brief Set/unset flow classify interface
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - interface to set/unset flow classify
+ @param ip4_table_index - ip4 classify table index (~0 for skip)
+ @param ip6_table_index - ip6 classify table index (~0 for skip)
+ @param l2_table_index - l2 classify table index (~0 for skip)
+ @param is_add - Set if non-zero, else unset
+ Note: User is recommeneded to use just one valid table_index per call.
+ (ip4_table_index, ip6_table_index, or l2_table_index)
+*/
+define flow_classify_set_interface {
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u32 ip4_table_index;
+ u32 ip6_table_index;
+ u8 is_add;
+};
+
+/** \brief Set/unset flow classify interface response
+ @param context - sender context, to match reply w/ request
+ @param retval - return value for request
+*/
+define flow_classify_set_interface_reply {
+ u32 context;
+ i32 retval;
+};
+
+/** \brief Get list of flow classify interfaces and tables
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param type - classify table type
+*/
+define flow_classify_dump {
+ u32 client_index;
+ u32 context;
+ u8 type;
+};
+
+/** \brief Flow classify operational state response.
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - software interface index
+ @param table_index - classify table index
+*/
+define flow_classify_details {
+ u32 context;
+ u32 sw_if_index;
+ u32 table_index;
+};
+
/** \brief Query relative index via node names
@param client_index - opaque cookie to identify the sender
@param context - sender context, to match reply w/ request
u32 context;
i32 retval;
};
+
+/** \brief DPDK interface HQoS pipe profile set request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - the interface
+ @param subport - subport ID
+ @param pipe - pipe ID within its subport
+ @param profile - pipe profile ID
+*/
+define sw_interface_set_dpdk_hqos_pipe {
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u32 subport;
+ u32 pipe;
+ u32 profile;
+};
+
+/** \brief DPDK interface HQoS pipe profile set reply
+ @param context - sender context, to match reply w/ request
+ @param retval - request return code
+*/
+define sw_interface_set_dpdk_hqos_pipe_reply {
+ u32 context;
+ i32 retval;
+};
+
+/** \brief DPDK interface HQoS subport parameters set request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - the interface
+ @param subport - subport ID
+ @param tb_rate - subport token bucket rate (measured in bytes/second)
+ @param tb_size - subport token bucket size (measured in credits)
+ @param tc_rate - subport traffic class 0 .. 3 rates (measured in bytes/second)
+ @param tc_period - enforcement period for rates (measured in milliseconds)
+*/
+define sw_interface_set_dpdk_hqos_subport {
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u32 subport;
+ u32 tb_rate;
+ u32 tb_size;
+ u32 tc_rate[4];
+ u32 tc_period;
+};
+
+/** \brief DPDK interface HQoS subport parameters set reply
+ @param context - sender context, to match reply w/ request
+ @param retval - request return code
+*/
+define sw_interface_set_dpdk_hqos_subport_reply {
+ u32 context;
+ i32 retval;
+};
+
+/** \brief DPDK interface HQoS tctbl entry set request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - the interface
+ @param entry - entry index ID
+ @param tc - traffic class (0 .. 3)
+ @param queue - traffic class queue (0 .. 3)
+*/
+define sw_interface_set_dpdk_hqos_tctbl {
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u32 entry;
+ u32 tc;
+ u32 queue;
+};
+
+/** \brief DPDK interface HQoS tctbl entry set reply
+ @param context - sender context, to match reply w/ request
+ @param retval - request return code
+*/
+define sw_interface_set_dpdk_hqos_tctbl_reply {
+ u32 context;
+ i32 retval;
+};
+
+/** \brief L2 interface pbb tag rewrite configure request
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param sw_if_index - interface the operation is applied to
+ @param vtr_op - Choose from l2_vtr_op_t enum values
+ @param inner_tag - needed for translate_qinq vtr op only
+ @param outer_tag - needed for translate_qinq vtr op only
+ @param b_dmac - B-tag remote mac address, needed for any push or translate_qinq vtr op
+ @param b_smac - B-tag local mac address, needed for any push or translate qinq vtr op
+ @param b_vlanid - B-tag vlanid, needed for any push or translate qinq vtr op
+ @param i_sid - I-tag service id, needed for any push or translate qinq vtr op
+*/
+define l2_interface_pbb_tag_rewrite
+{
+ u32 client_index;
+ u32 context;
+ u32 sw_if_index;
+ u32 vtr_op;
+ u16 outer_tag;
+ u8 b_dmac[6];
+ u8 b_smac[6];
+ u16 b_vlanid;
+ u32 i_sid;
+};
+
+/** \brief L2 interface pbb tag rewrite response
+ @param context - sender context, to match reply w/ request
+ @param retval - return code for the request
+*/
+define l2_interface_pbb_tag_rewrite_reply
+{
+ u32 context;
+ i32 retval;
+};
+
+/** \brief Punt traffic to the host
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param is_add - add punt if non-zero, else delete
+ @param ipv - L3 protocol 4 - IPv4, 6 - IPv6, ~0 - All
+ @param l4_protocol - L4 protocol to be punted, only UDP (0x11) is supported
+ @param l4_port - TCP/UDP port to be punted
+*/
+define punt {
+ u32 client_index;
+ u32 context;
+ u8 is_add;
+ u8 ipv;
+ u8 l4_protocol;
+ u16 l4_port;
+};
+
+/** \brief Reply to the punt request
+ @param context - sender context which was passed in the request
+ @param retval - return code of punt request
+*/
+define punt_reply
+{
+ u32 context;
+ i32 retval;
+};
+
+/** \brief Dump ipsec policy database data
+ @param client_index - opaque cookie to identify the sender
+ @param context - sender context, to match reply w/ request
+ @param spd_id - SPD instance id
+ @param sa_id - SA id, optional, set to ~0 to see all policies in SPD
+*/
+define ipsec_spd_dump {
+ u32 client_index;
+ u32 context;
+ u32 spd_id;
+ u32 sa_id;
+};
+
+/** \brief IPsec policy database response
+ @param context - sender context which was passed in the request
+ @param spd_id - SPD instance id
+ @param priority - numeric value to control policy evaluation order
+ @param is_outbound - [1|0] to indicate if direction is [out|in]bound
+ @param is_ipv6 - [1|0] to indicate if address family is ipv[6|4]
+ @param local_start_addr - first address in local traffic selector range
+ @param local_stop_addr - last address in local traffic selector range
+ @param local_start_port - first port in local traffic selector range
+ @param local_stop_port - last port in local traffic selector range
+ @param remote_start_addr - first address in remote traffic selector range
+ @param remote_stop_addr - last address in remote traffic selector range
+ @param remote_start_port - first port in remote traffic selector range
+ @param remote_stop_port - last port in remote traffic selector range
+ @param protocol - traffic selector protocol
+ @param policy - policy action
+ @param sa_id - SA id
+ @param bytes - byte count of packets matching this policy
+ @param packets - count of packets matching this policy
+*/
+
+define ipsec_spd_details {
+ u32 context;
+ u32 spd_id;
+ i32 priority;
+ u8 is_outbound;
+ u8 is_ipv6;
+ u8 local_start_addr[16];
+ u8 local_stop_addr[16];
+ u16 local_start_port;
+ u16 local_stop_port;
+ u8 remote_start_addr[16];
+ u8 remote_stop_addr[16];
+ u16 remote_start_port;
+ u16 remote_stop_port;
+ u8 protocol;
+ u8 policy;
+ u32 sa_id;
+ u64 bytes;
+ u64 packets;
+};
+