X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;ds=sidebyside;f=doc%2Fguides%2Fnics%2Fszedata2.rst;h=a2092f9c5eb3754b2a0a0289b003061c6dbf96aa;hb=b63264c8342e6a1b6971c79550d2af2024b6a4de;hp=1a5d41380189da6e20d533d47fd514c7eb77506e;hpb=ca33590b6af032bff57d9cc70455660466a654b2;p=deb_dpdk.git diff --git a/doc/guides/nics/szedata2.rst b/doc/guides/nics/szedata2.rst index 1a5d4138..a2092f9c 100644 --- a/doc/guides/nics/szedata2.rst +++ b/doc/guides/nics/szedata2.rst @@ -1,32 +1,5 @@ -.. BSD LICENSE +.. SPDX-License-Identifier: BSD-3-Clause Copyright 2015 - 2016 CESNET - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of CESNET nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. SZEDATA2 poll mode driver library ================================= @@ -70,8 +43,10 @@ separately: * **Kernel modules** + * combo6core * combov3 - * szedata2_cv3 + * szedata2 + * szedata2_cv3 or szedata2_cv3_fdt Kernel modules manage initialization of hardware, allocation and sharing of resources for user space applications. @@ -79,6 +54,15 @@ separately: Information about getting the dependencies can be found `here `_. +Versions of the packages +~~~~~~~~~~~~~~~~~~~~~~~~ + +The minimum version of the provided packages: + +* for DPDK from 18.05: **4.4.1** + +* for DPDK up to 18.02 (including): **3.0.5** + Configuration ------------- @@ -89,45 +73,53 @@ These configuration options can be modified before compilation in the Value **y** enables compilation of szedata2 PMD. -* ``CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS`` default value: **0** - - This option defines type of firmware address space and must be set - according to the used card and mode. - Currently supported values are: - - * **0** - for cards (modes): - - * NFB-100G1 (100G1) +Using the SZEDATA2 PMD +---------------------- - * **1** - for cards (modes): +From DPDK version 16.04 the type of SZEDATA2 PMD is changed to PMD_PDEV. +SZEDATA2 device is automatically recognized during EAL initialization. +No special command line options are needed. - * NFB-100G2Q (100G1) +Kernel modules have to be loaded before running the DPDK application. - * **2** - for cards (modes): +NFB card architecture +--------------------- - * NFB-40G2 (40G2) - * NFB-100G2C (100G2) - * NFB-100G2Q (40G2) +The NFB cards are multi-port multi-queue cards, where (generally) data from any +Ethernet port may be sent to any queue. +They were historically represented in DPDK as a single port. - * **3** - for cards (modes): +However, the new NFB-200G2QL card employs an addon cable which allows to connect +it to two physical PCI-E slots at the same time (see the diagram below). +This is done to allow 200 Gbps of traffic to be transferred through the PCI-E +bus (note that a single PCI-E 3.0 x16 slot provides only 125 Gbps theoretical +throughput). - * NFB-40G2 (10G8) - * NFB-100G2Q (10G8) +Since each slot may be connected to a different CPU and therefore to a different +NUMA node, the card is represented as two ports in DPDK (each with half of the +queues), which allows DPDK to work with data from the individual queues on the +right NUMA node. - * **4** - for cards (modes): +.. figure:: img/szedata2_nfb200g_architecture.* + :align: center - * NFB-100G1 (10G10) + NFB-200G2QL high-level diagram - * **5** - for experimental firmwares and future use +Limitations +----------- -Using the SZEDATA2 PMD ----------------------- +The SZEDATA2 PMD does not support operations related to Ethernet ports +(link_up, link_down, set_mac_address, etc.). -From DPDK version 16.04 the type of SZEDATA2 PMD is changed to PMD_PDEV. -SZEDATA2 device is automatically recognized during EAL initialization. -No special command line options are needed. +NFB cards employ multiple Ethernet ports. +Until now, Ethernet port-related operations were performed on all of them +(since the whole card was represented as a single port). +With NFB-200G2QL card, this is no longer viable (see above). -Kernel modules have to be loaded before running the DPDK application. +Since there is no fixed mapping between the queues and Ethernet ports, and since +a single card can be represented as two ports in DPDK, there is no way of +telling which (if any) physical ports should be associated with individual +ports in DPDK. Example of usage ----------------