X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;ds=sidebyside;f=docs%2Freport%2Fvpp_performance_tests%2Fcsit_release_notes.rst;h=6ac7fcdfc7b967bd688439978af14a77699f985e;hb=e253cf226e1595acecf42db1262e1cb179aae5e7;hp=377bd30d3fc957a47f9d43d561ee2928e6850a4e;hpb=7577a3ff000ba4c61394bc49754a257fbb3d31ef;p=csit.git
diff --git a/docs/report/vpp_performance_tests/csit_release_notes.rst b/docs/report/vpp_performance_tests/csit_release_notes.rst
index 377bd30d3f..6ac7fcdfc7 100644
--- a/docs/report/vpp_performance_tests/csit_release_notes.rst
+++ b/docs/report/vpp_performance_tests/csit_release_notes.rst
@@ -1,150 +1,220 @@
-CSIT Release Notes
-==================
-
-Changes in CSIT |release|
--------------------------
-
-#. **VPP performance tests**
-
- - *MRR tests* - New Maximum Receive Rate tests measure the packet
- forwarding rate under the maximum load offered by traffic
- generator over a set trial duration, regardless of packet loss.
- MRR tests are used for continuous performance trending and for
- comparison between releases.
-
- - *Service Chaining with SRv6* - New SRv6 (Segment Routing IPv6) proxy
- tests measure performance of SRv6 Endpoint fronting SR-unaware
- appliance via masquerading (End.AM), dynamic proxy (End.AD) or
- static proxy (End.AS) SR functions.
-
-#. **Presentation and Analytics Layer**
-
- - *Performance trending* - Added continuous performance trending and
- analysis. New Performance Trending and Performance Analysis jobs
- executed regular throughput tests, with results being subsequently
- analysed and trend and anomalies summarized and presented in VPP
- Performance Dashboard and trendline graphs.
-
-#. **Test Framework Optimizations**
-
- - *Performance tests efficiency* - Qemu build/install optimizations,
- warmup phase handling, vpp restart handling. Resulted in improved
- stability and reduced total execution time by 30% for single pkt
- size e.g. 64B/78B.
-
- - *General code housekeeping* - ongoing RF keywords optimizations,
- removal of redundant RF keywords.
-
-Performance Changes
--------------------
-
-Relative performance changes in measured packet throughput in CSIT
-|release| are calculated against the results from CSIT |release-1|
-report. Listed mean and standard deviation values are computed based on
-a series of the same tests executed against respective VPP releases to
-verify test results repeatibility, with percentage change calculated for
-mean values. Note that the standard deviation is quite high for a small
-number of packet throughput tests, what indicates poor test results
-repeatability and makes the relative change of mean throughput value not
-fully representative for these tests. The root causes behind poor
-results repeatibility vary between the test cases.
-
-NDR Changes
-~~~~~~~~~~~
-
-NDR small packet throughput changes between releases are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.csv>`_,
- - `csv format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.csv>`_,
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-ndr-1t1c-full.txt>`_,
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-ndr-2t2c-full.txt>`_.
-
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp performance jobs`_ with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_.
-
-PDR Changes
-~~~~~~~~~~~
-
-NDR small packet throughput changes between releases are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.csv>`_,
- - `csv format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.csv>`_,
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-pdr-1t1c-full.txt>`_,
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-pdr-2t2c-full.txt>`_.
-
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp performance jobs`_ with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip `archived here <../_static/archive/>`_.
-
-MRR Changes
-~~~~~~~~~~~
-
-MRR small packet throughput changes between releases are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.csv>`_,
- - `csv format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.csv>`_,
- - `csv format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.csv>`_,
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-mrr-1t1c-full.txt>`_,
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-mrr-2t2c-full.txt>`_,
- - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-mrr-4t4c-full.txt>`_.
-
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp mrr jobs `_
- with Robot Framework result files csit-vpp-perf-mrr-daily-master__*__output.xml.gz
- `archived here `_.
-
-Throughput Trending
--------------------
-
-In addition to reporting throughput changes between VPP releases, CSIT
-provides continuous performance trending for VPP master branch:
-
-#. `VPP Performance Dashboard `_
- - per VPP test case throughput trend, trend compliance and summary of
- detected anomalies.
-
-#. `Trending Methodology `_
- - throughput test metrics, trend calculations and anomaly
- classification (progression, regression, outlier).
-
-#. `Trendline Graphs `_
- - per VPP build MRR throughput measurements against the trendline
- with anomaly highlights, with associated CSIT test jobs.
-
-Known Issues
-------------
-
-List of known issues in CSIT |release| for VPP performance tests:
-
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+
-| # | Issue | Jira ID | Description |
-+===+=================================================+============+=================================================================+
-| 1 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570 | DPDK reporting rx-errors, indicating L1 issue. Suspected issue |
-| | on x520. | | with HW combination of X710-X520 in LF testbeds. Not observed |
-| | | | outside of LF testbeds. |
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+
-| 2 | Lower than expected NDR throughput of DPDK | CSIT-571 | Suspected NIC firmware or DPDK driver issue affecting NDR and |
-| | testpmd and VPP L2 path NDR throughput with | | PDR throughput on XL710 and X710 NICs. |
-| | xl710 and x710 NICs, compared to x520 NICs. | | |
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+
-| 3 | Tagged Ethernet dot1q and dot1ad L2 path | CSIT-1066 | Tagged Ethernet dot1q and dot1ad L2 path throughput regression: |
-| | throughput regression. | | NDR -2%..-5%, PDR -2%..-6%, MRR. Affects l2xc and l2bd |
-| | | | performance tests. |
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+
-| 4 | IPSec (software, no QAT HW) throughput | CSIT-1064 | IPSec throughput regression: NDR -3%..-8%, PDR -2%..-8%, MRR |
-| | regression. | | -3%..-7%. Affects IPSec SW tests, QAT HW tests not affected. |
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+
-| 5 | High failure rate of creating working container | CSIT-1065 | About 20% of orchestrated container topology tests failing data |
-| | topologies with K8s/Ligato orchestration. | | plane verification indicating configuration issue. Suspected |
-| | | | issue with Ligato vpp-agent. |
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+Release Notes
+=============
+
+Changes in |csit-release|
+-------------------------
+
+#. **VPP performance tests**
+
+ - *MRR tests* - Maximum Receive Rate tests measure the packet forwarding rate
+ under the maximum load offered by traffic generator over a set trial
+ duration, regardless of packet loss. MRR tests are used for continuous
+ performance trending and for comparison between releases.
+
+ - *MLR tests* - NDR and PDR tests measure the packet forwarding rate using
+ MLRsearch library by traffic generator. All tests that previously used
+ binary search were converted to MLRsearch.
+
+ - *L2patch tests* - Tests measure performance of L2patch, cross linking
+ RX and TX of two physical interfaces.
+
+ - *2-node tests* - Baseline set of 2-node tests covering base ip4, ip6,
+ l2patch, l2bd, l2xc.
+
+ - *Generated tests* - Simplified and unified test structure,
+ semi-autogenerated by generator script. Test generator is currently able
+ to create test combinations with various frame size and cores combinations.
+ All existing test cases were converted to new format.
+
+ - *Simultaneous multithreading* - SMT-aware automatic detection and
+ resource configuration including thread affinity, number of rx queues and
+ DPDK I/O mbufs. Tests are automatically tagged during execution indicating
+ configuration.
+
+ - *Intel Skylake* - Topologies consisting of 2-node and 3-node using
+ SuperMirco servers each equipped with two Intel Xeon Skylake Platinum
+ processors. Full Ansible playbooks refactor for quick server
+ (re)installation and reference pointers of configuration.
+
+#. **Presentation and Analytics Layer**
+
+ - *Performance trending* - Added continuous performance trending and
+ analysis. New Performance Trending and Performance Analysis jobs
+ executed regular throughput tests, with results being subsequently
+ analysed and trend and anomalies summarized and presented in VPP
+ Performance Dashboard and trendline graphs.
+
+#. **Test Framework Optimizations**
+
+ - *General code housekeeping* - ongoing RF keywords optimizations,
+ removal of redundant RF keywords.
+
+Performance Changes
+-------------------
+
+Relative performance changes in measured packet throughput in |csit-release|
+are calculated against the results from |csit-release-1|
+report. Listed mean and standard deviation values are computed based on
+a series of the same tests executed against respective VPP releases to
+verify test results repeatability, with percentage change calculated for
+mean values. Note that the standard deviation is quite high for a small
+number of packet throughput tests, what indicates poor test results
+repeatability and makes the relative change of mean throughput value not
+fully representative for these tests. The root causes behind poor
+results repeatability vary between the test cases.
+
+NDR Changes
+~~~~~~~~~~~
+
+NDR throughput changes between releases are available in a
+CSV and pretty ASCII formats:
+
+ - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-ndr.csv>`_,
+ - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-ndr.csv>`_,
+ - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-ndr.txt>`_,
+ - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-ndr.txt>`_.
+
+.. note::
+
+ Test results have been generated by
+ `FD.io test executor vpp performance job 3n-hsw`_,
+ with Robot Framework result
+ files csit-vpp-perf-|srelease|-\*.zip
+ `archived here <../_static/archive/>`_.
+
+PDR Changes
+~~~~~~~~~~~
+
+PDR throughput changes between releases are available in a
+CSV and pretty ASCII formats:
+
+ - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-pdr.csv>`_,
+ - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-pdr.csv>`_,
+ - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-pdr.txt>`_,
+ - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-pdr.txt>`_.
+
+.. note::
+
+ Test results have been generated by
+ `FD.io test executor vpp performance job 3n-hsw`_,
+ with Robot Framework result
+ files csit-vpp-perf-|srelease|-\*.zip
+ `archived here <../_static/archive/>`_.
+
+MRR Changes
+~~~~~~~~~~~
+
+MRR small packet throughput changes between releases are available in a
+CSV and pretty ASCII formats:
+
+ - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-mrr.csv>`_,
+ - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-mrr.csv>`_,
+ - `csv format for 4t4c <../_static/vpp/performance-changes-4t4c-mrr.csv>`_,
+ - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-mrr.txt>`_,
+ - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-mrr.txt>`_,
+ - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-4t4c-mrr.txt>`_.
+
+.. note::
+
+ Test results have been generated by
+ `FD.io test executor vpp performance job 3n-hsw`_,
+ with Robot Framework result
+ files csit-vpp-perf-|srelease|-\*.zip
+ `archived here <../_static/archive/>`_.
+
+Comparison Across Testbeds
+--------------------------
+
+Relative performance changes in measured packet throughputon 3-Node Skx testbed
+are calculated against the results measured on 3-Node Hsw testbed.
+
+NDR Changes
+~~~~~~~~~~~
+
+NDR changes between testbeds are available in a
+CSV and pretty ASCII formats:
+
+ - `csv format for ndr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-ndr.csv>`_,
+ - `pretty ASCII format for ndr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-ndr.txt>`_.
+
+.. note::
+
+ Test results have been generated by
+ `FD.io test executor vpp performance job 3n-hsw`_ and
+ `FD.io test executor vpp performance job 3n-skx`_
+ with Robot Framework result
+ files csit-vpp-perf-|srelease|-\*.zip
+ `archived here <../_static/archive/>`_.
+
+PDR Changes
+~~~~~~~~~~~
+
+PDR throughput changes between testbeds are available in a
+CSV and pretty ASCII formats:
+
+ - `csv format for pdr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-pdr.csv>`_,
+ - `pretty ASCII format for pdr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-pdr.txt>`_.
+
+.. note::
+
+ Test results have been generated by
+ `FD.io test executor vpp performance job 3n-hsw`_ and
+ `FD.io test executor vpp performance job 3n-skx`_
+ with Robot Framework result
+ files csit-vpp-perf-|srelease|-\*.zip
+ `archived here <../_static/archive/>`_.
+
+MRR Changes
+~~~~~~~~~~~
+
+MRR throughput changes between testbeds are available in a
+CSV and pretty ASCII formats:
+
+ - `csv format for mrr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-mrr.csv>`_,
+ - `pretty ASCII format for mrr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-mrr.txt>`_.
+
+.. note::
+
+ Test results have been generated by
+ `FD.io test executor vpp performance job 3n-hsw`_ and
+ `FD.io test executor vpp performance job 3n-skx`_
+ with Robot Framework result
+ files csit-vpp-perf-|srelease|-\*.zip
+ `archived here <../_static/archive/>`_.
+
+Throughput Trending
+-------------------
+
+In addition to reporting throughput changes between VPP releases, CSIT
+provides continuous performance trending for VPP master branch:
+
+#. `VPP Performance Dashboard `_
+ - per VPP test case throughput trend, trend compliance and summary of
+ detected anomalies.
+
+#. `Trending Methodology `_
+ - throughput test metrics, trend calculations and anomaly
+ classification (progression, regression, outlier).
+
+#. `Trendline Graphs `_
+ - per VPP build MRR throughput measurements against the trendline
+ with anomaly highlights, with associated CSIT test jobs.
+
+Known Issues
+------------
+
+List of known issues in |csit-release| for VPP performance tests:
+
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| # | Issue | Jira ID | Description |
++===+=================================================+============+=================================================================+
+| 1 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570 | DPDK reporting rx-errors, indicating L1 issue. Suspected issue |
+| | on x520. | | with HW combination of X710-X520 in LF testbeds. Not observed |
+| | | | outside of LF testbeds. |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| 2 | High failure rate of api call | VPP-1361 | Failure rate: 30-40% of tests failing due to interfaces not |
+| | sw_interface_set_flags [admin-up|link-up] | | in link-up state after API call sw_interface_set_flags. |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+
+| 3 | Scale IPSecHW Interface mode throughput | CSIT-1234 | IPSec throughput regression: NDR -28%..-31%, PDR -28%..-31%, |
+| | regression. | | MRR -40%. Affects IPSec HW Scale 1000tnl tests with Int mode. |
++---+-------------------------------------------------+------------+-----------------------------------------------------------------+