X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;ds=sidebyside;f=docs%2Freport%2Fvpp_performance_tests%2Fthroughput_speedup_multi_core%2Fip4.rst;h=22ca300fa4295bdd78b6e6e86788ff3f1e697714;hb=20dff377084a35d285c720f7d9b15127825deecd;hp=5f2e7d2824abcf972949b105e946b0eed17edc06;hpb=f56e629f1628f938b2a6e1bf27a74375ca3839cf;p=csit.git
diff --git a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4.rst b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4.rst
index 5f2e7d2824..22ca300fa4 100644
--- a/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4.rst
+++ b/docs/report/vpp_performance_tests/throughput_speedup_multi_core/ip4.rst
@@ -1,5 +1,10 @@
-IPv4 Routed-Forwarding
-======================
+
+.. raw:: latex
+
+ \clearpage
+
+IPv4 Routing
+============
Following sections include Throughput Speedup Analysis for VPP multi-
core multi-thread configurations with no Hyper-Threading, specifically
@@ -9,117 +14,18 @@ used for the graphs comes from Phy-to-Phy 64B performance tests with VPP
IPv4 Routed-Forwarding, including NDR throughput (zero packet loss) and
PDR throughput (<0.5% packet loss).
-NDR Throughput
---------------
-
-VPP NDR 64B packet throughput speedup ratio is presented in the graphs
-below for 10ge2p1x520 and 40ge2p1xl710 network interface cards.
-
-NIC 10ge2p1x520
-~~~~~~~~~~~~~~~
-
-.. raw:: html
-
-
-
-.. raw:: latex
-
- \begin{figure}[H]
- \centering
- \graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-64B-ip4-tsa-ndrdisc}
- \label{fig:10ge2p1x520-64B-ip4-tsa-ndrdisc}
- \end{figure}
-
-*Figure 1. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4
- $ grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
-
-NIC 40ge2p1xl710
-~~~~~~~~~~~~~~~~
-
-.. raw:: html
-
-
-
-.. raw:: latex
-
- \begin{figure}[H]
- \centering
- \graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{40ge2p1xl710-64B-ip4-tsa-ndrdisc}
- \label{fig:40ge2p1xl710-64B-ip4-tsa-ndrdisc}
- \end{figure}
-
-*Figure 2. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-NDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -P '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710*
- :shell:
-
-.. only:: latex
-
- .. code-block:: bash
-
- $ cd tests/vpp/perf/ip4
- $ grep -P '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 40ge2p1xl710*
-
-PDR Throughput
---------------
-
-VPP PDR 64B packet throughput speedup ratio is presented in the graphs
-below for 10ge2p1x520 and 40ge2p1xl710 network interface cards. PDR
-measured for 0.5% packet loss ratio.
-
-NIC 10ge2p1x520
-~~~~~~~~~~~~~~~
-
-.. raw:: html
-
-
-
-.. raw:: latex
-
- \begin{figure}[H]
- \centering
- \graphicspath{{../_build/_static/vpp/}}
- \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{10ge2p1x520-64B-ip4-tsa-pdrdisc}
- \label{fig:10ge2p1x520-64B-ip4-tsa-pdrdisc}
- \end{figure}
-
-*Figure 3. Throughput Speedup Analysis - Multi-Core Speedup Ratio - Normalized
-PDR Throughput for Phy-to-Phy IPv4 Routed-Forwarding.*
-
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. only:: html
-
- .. program-output:: cd ../../../../../ && set +x && cd tests/vpp/perf/ip4 && grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
- :shell:
+CSIT source code for the test cases used for plots can be found in
+`CSIT git repository `_.
-.. only:: latex
+.. toctree::
- .. code-block:: bash
+ ip4-3n-skx-x710
- $ cd tests/vpp/perf/ip4
- $ grep -E '64B-(1t1c|2t2c|4t4c)-ethip4-ip4(base|scale[a-z0-9]*)*-ndrdisc' 10ge2p1x520*
+..
+ ip4-3n-hsw-x520
+ ip4-3n-hsw-x710
+ ip4-3n-hsw-xl710
+ ip4-3n-skx-x710
+ ip4-2n-skx-x710
+ ip4-2n-skx-xxv710
+ ip4-2n-dnv-x553