X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;ds=sidebyside;f=tests%2Fsuites%2Fipv4%2Fipv4_iacl_untagged.robot;h=43c4a3732c1c4c0d9141f680ee1345a9944065c1;hb=559a2b904cf95e4a5a82726d8b3791e57e7a9f9c;hp=2e3d11cb3a1f218d82ecfd0a9b030623cba9fbcc;hpb=452fabf532691f88b36b79bf2469afde18183de2;p=csit.git diff --git a/tests/suites/ipv4/ipv4_iacl_untagged.robot b/tests/suites/ipv4/ipv4_iacl_untagged.robot index 2e3d11cb3a..43c4a3732c 100644 --- a/tests/suites/ipv4/ipv4_iacl_untagged.robot +++ b/tests/suites/ipv4/ipv4_iacl_untagged.robot @@ -15,8 +15,8 @@ | Resource | resources/libraries/robot/default.robot | Resource | resources/libraries/robot/counters.robot | Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot | Resource | resources/libraries/robot/ipv4.robot -| Resource | resources/libraries/robot/iacl.robot | Resource | resources/libraries/robot/l2_xconnect.robot | Resource | resources/libraries/robot/traffic.robot | Library | resources.libraries.python.Classify.Classify @@ -26,102 +26,485 @@ | Suite Setup | Run Keywords | Setup all TGs before traffic script | ... | AND | Update All Interface Data On All Nodes | ${nodes} | Test Setup | Setup all DUTs before test -| Test Teardown | Show packet trace on all DUTs | ${nodes} +| Test Teardown | Run Keywords | Show packet trace on all DUTs | ${nodes} +| ... | AND | Vpp Show Errors | ${nodes['DUT1']} *** Variables *** -| ${dut1_if1_ip}= | 192.168.1.1 -| ${dut1_if2_ip}= | 192.168.2.1 -| ${dut1_if2_ip_GW}= | 192.168.2.2 +| ${dut1_to_tg_ip}= | 192.168.1.1 +| ${dut1_to_dut2_ip}= | 192.168.2.1 +| ${dut1_to_dut2_ip_GW}= | 192.168.2.2 | ${test_dst_ip}= | 32.0.0.1 | ${test_src_ip}= | 16.0.0.1 +| ${non_drop_dst_ip}= | 33.0.0.1 +| ${non_drop_src_ip}= | 15.0.0.1 | ${prefix_length}= | 24 +| ${ip_version}= | ip4 *** Test Cases *** | VPP drops packets based on IPv4 source addresses | | [Documentation] | Create classify table on VPP, add source IP address | | ... | of traffic into table and setup 'deny' traffic | | ... | and check if traffic is dropped. -| | Given Node path computed for 3-node topology +| | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in path are up -| | And IPv4 Addresses set on the node interfaces -| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip} | ${dut1_if2} -| | ... | ${dut1_if2_ip} | ${prefix_length} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} +| | ... | ${tg_to_dut2_mac} +| | And Vpp Route Add +| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} +| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | Then Send Packet And Check Headers | ${tg_node} +| | ... | ${non_drop_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} +| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} +| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} | | ${table_index} | ${skip_n} | ${match_n}= | When Vpp Create Classify Table -| | ... | ${dut1_node} | ip4 | src +| | ... | ${dut1_node} | ${ip_version} | src | | And Vpp Configure Classify Session | | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n} -| | ... | ip4 | src | ${test_src_ip} +| | ... | ${ip_version} | src | ${test_src_ip} | | And Vpp Enable Input Acl Interface -| | ... | ${dut1_node} | ${dut1_if1} | ip4 | ${table_index} -| | And Add Arp On Dut -| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip_GW} | ${tg_if2_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} | ${dut1_if2_ip_GW} -| | ... | ${dut1_if2} -| | And L2 setup xconnect on DUT | ${dut2_node} | ${dut2_if1} | ${dut2_if2} -| | Then Send packet from Port to Port should failed | ${tg_node} | -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_if1} | ${tg_if1_mac} | -| | ... | ${dut1_if1_mac} | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} +| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index} +| | Then Send packet from Port to Port should failed | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} +| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers | ${tg_node} +| | ... | ${non_drop_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} +| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} | VPP drops packets based on IPv4 destination addresses | | [Documentation] | Create classify table on VPP, add destination IP address | | ... | of traffic into table and setup 'deny' traffic | | ... | and check if traffic is dropped. -| | Given Node path computed for 3-node topology +| | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in path are up -| | And IPv4 Addresses set on the node interfaces -| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip} | ${dut1_if2} -| | ... | ${dut1_if2_ip} | ${prefix_length} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} +| | ... | ${tg_to_dut2_mac} +| | And Vpp Route Add +| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} +| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} +| | And Vpp Route Add +| | ... | ${dut1_node} | ${non_drop_dst_ip} | ${prefix_length} +| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | Then Send Packet And Check Headers | ${tg_node} +| | ... | ${test_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} +| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} +| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} | | ${table_index} | ${skip_n} | ${match_n}= | When Vpp Create Classify Table -| | ... | ${dut1_node} | ip4 | dst +| | ... | ${dut1_node} | ${ip_version} | dst | | And Vpp Configure Classify Session | | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | ${test_dst_ip} +| | ... | ${ip_version} | dst | ${test_dst_ip} | | And Vpp Enable Input Acl Interface -| | ... | ${dut1_node} | ${dut1_if1} | ip4 | ${table_index} -| | And Add Arp On Dut -| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip_GW} | ${tg_if2_mac} -| | And Vpp Route Add -| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} | ${dut1_if2_ip_GW} -| | ... | ${dut1_if2} -| | And L2 setup xconnect on DUT | ${dut2_node} | ${dut2_if1} | ${dut2_if2} -| | Then Send packet from Port to Port should failed | ${tg_node} | -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_if1} | ${tg_if1_mac} | -| | ... | ${dut1_if1_mac} | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} - +| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index} +| | Then Send packet from Port to Port should failed | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} +| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers | ${tg_node} +| | ... | ${test_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} +| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} | VPP drops packets based on IPv4 src-addr and dst-addr | | [Documentation] | Create classify table on VPP, add source and destination | | ... | IP address of traffic into table and setup 'deny' traffic | | ... | and check if traffic is dropped. -| | Given Node path computed for 3-node topology +| | Given Path for 3-node testing is set | | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Interfaces in path are up -| | And IPv4 Addresses set on the node interfaces -| | ... | ${dut1_node} | ${dut1_if1} | ${dut1_if1_ip} | ${dut1_if2} -| | ... | ${dut1_if2_ip} | ${prefix_length} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} +| | ... | ${tg_to_dut2_mac} +| | And Vpp Route Add +| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} +| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} +| | And Vpp Route Add +| | ... | ${dut1_node} | ${non_drop_dst_ip} | ${prefix_length} +| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | Then Send Packet And Check Headers | ${tg_node} +| | ... | ${non_drop_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1} +| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} +| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} +| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} | | ${table_index_1} | ${skip_n_1} | ${match_n_1}= -| | ... | When Vpp Create Classify Table | ${dut1_node} | ip4 | src +| | ... | When Vpp Create Classify Table | ${dut1_node} | ${ip_version} | src | | ${table_index_2} | ${skip_n_2} | ${match_n_2}= -| | ... | When Vpp Create Classify Table | ${dut1_node} | ip4 | dst +| | ... | And Vpp Create Classify Table | ${dut1_node} | ${ip_version} | dst | | And Vpp Configure Classify Session | | ... | ${dut1_node} | deny | ${table_index_1} | ${skip_n_1} | ${match_n_2} -| | ... | ip4 | src | ${test_src_ip} +| | ... | ${ip_version} | src | ${test_src_ip} | | And Vpp Configure Classify Session | | ... | ${dut1_node} | deny | ${table_index_2} | ${skip_n_2} | ${match_n_2} -| | ... | ip4 | dst | ${test_dst_ip} +| | ... | ${ip_version} | dst | ${test_dst_ip} +| | And Vpp Enable Input Acl Interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_1} +| | And Vpp Enable Input Acl Interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index_2} +| | Then Send packet from Port to Port should failed | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} +| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} +| | And Send Packet And Check Headers | ${tg_node} +| | ... | ${non_drop_src_ip} | ${non_drop_dst_ip} | ${tg_to_dut1} +| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2} +| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac} + +| VPP drops packets based on IPv4 protocol (TCP) +| | [Documentation] | Create classify table on VPP, add mask for TCP port +| | ... | into table and setup 'deny' traffic +| | ... | and check if TCP traffic is dropped. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} +| | ... | ${tg_to_dut2_mac} +| | And Vpp Route Add +| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} +| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | Then Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20 +| | ${table_index} | ${skip_n} | ${match_n}= | When Vpp Create Classify Table Hex +| | ... | ${dut1_node} | 0000000000000000000000000000000000000000000000FF +| | And Vpp Configure Classify Session Hex +| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n} +| | ... | 000000000000000000000000000000000000000000000006 | | And Vpp Enable Input Acl Interface -| | ... | ${dut1_node} | ${dut1_if1} | ip4 | ${table_index_1} +| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index} +| | Then Send TCP or UDP packet should failed | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20 + +| VPP drops packets based on IPv4 protocol (UDP) +| | [Documentation] | Create classify table on VPP, add mask for UDP port +| | ... | into table and setup 'deny' traffic +| | ... | and check if UDP traffic is dropped. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} +| | ... | ${tg_to_dut2_mac} +| | And Vpp Route Add +| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} +| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | Then Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20 +| | ${table_index} | ${skip_n} | ${match_n}= | When Vpp Create Classify Table Hex +| | ... | ${dut1_node} | 0000000000000000000000000000000000000000000000FF +| | And Vpp Configure Classify Session Hex +| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n} +| | ... | 000000000000000000000000000000000000000000000011 | | And Vpp Enable Input Acl Interface -| | ... | ${dut1_node} | ${dut1_if1} | ip4 | ${table_index_2} +| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index} +| | Then Send TCP or UDP packet should failed | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20 + +| VPP drops packets based on IPv4 TCP src ports +| | [Documentation] | Create classify table on VPP, add source TCP port +| | ... | of traffic into table and setup 'deny' traffic +| | ... | and check if traffic is dropped. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} | | And Add Arp On Dut -| | ... | ${dut1_node} | ${dut1_if2} | ${dut1_if2_ip_GW} | ${tg_if2_mac} +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} +| | ... | ${tg_to_dut2_mac} | | And Vpp Route Add -| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} | ${dut1_if2_ip_GW} -| | ... | ${dut1_if2} -| | And L2 setup xconnect on DUT | ${dut2_node} | ${dut2_if1} | ${dut2_if2} -| | Then Send packet from Port to Port should failed | ${tg_node} | -| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_if1} | ${tg_if1_mac} | -| | ... | ${dut1_if1_mac} | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac} +| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} +| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | Then Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 20 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20 +| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP | source +| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 0 +| | ${table_index} | ${skip_n} | ${match_n}= | When Vpp Create Classify Table Hex +| | ... | ${dut1_node} | ${hex_mask} +| | And Vpp Configure Classify Session Hex +| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n} +| | ... | ${hex_value} +| | And Vpp Enable Input Acl Interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index} +| | Then Send TCP or UDP packet should failed | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 20 + +| VPP drops packets based on IPv4 TCP dst ports +| | [Documentation] | Create classify table on VPP, add destination TCP port +| | ... | of traffic into table and setup 'deny' traffic +| | ... | and check if traffic is dropped. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} +| | ... | ${tg_to_dut2_mac} +| | And Vpp Route Add +| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} +| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | Then Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 110 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 80 +| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP | destination +| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 0 | 80 +| | ${table_index} | ${skip_n} | ${match_n}= | When Vpp Create Classify Table Hex +| | ... | ${dut1_node} | ${hex_mask} +| | And Vpp Configure Classify Session Hex +| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n} +| | ... | ${hex_value} +| | And Vpp Enable Input Acl Interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index} +| | Then Send TCP or UDP packet should failed | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 80 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 20 | 110 + +| VPP drops packets based on IPv4 TCP src + dst ports +| | [Documentation] | Create classify table on VPP, add source and destination +| | ... | TCP port of traffic into table and setup 'deny' traffic +| | ... | and check if traffic is dropped. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} +| | ... | ${tg_to_dut2_mac} +| | And Vpp Route Add +| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} +| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | Then Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20 +| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | TCP +| | ... | source + destination +| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20 +| | ${table_index} | ${skip_n} | ${match_n}= | When Vpp Create Classify Table Hex +| | ... | ${dut1_node} | ${hex_mask} +| | And Vpp Configure Classify Session Hex +| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n} +| | ... | ${hex_value} +| | And Vpp Enable Input Acl Interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index} +| | Then Send TCP or UDP packet should failed | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 80 | 20 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | TCP | 110 | 25 + +| VPP drops packets based on IPv4 UDP src ports +| | [Documentation] | Create classify table on VPP, add source UDP port +| | ... | of traffic into table and setup 'deny' traffic +| | ... | and check if traffic is dropped. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} +| | ... | ${tg_to_dut2_mac} +| | And Vpp Route Add +| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} +| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | Then Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 20 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20 +| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP | source +| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 0 +| | ${table_index} | ${skip_n} | ${match_n}= | When Vpp Create Classify Table Hex +| | ... | ${dut1_node} | ${hex_mask} +| | And Vpp Configure Classify Session Hex +| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n} +| | ... | ${hex_value} +| | And Vpp Enable Input Acl Interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index} +| | Then Send TCP or UDP packet should failed | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 20 + +| VPP drops packets based on IPv4 UDP dst ports +| | [Documentation] | Create classify table on VPP, add destination UDP port +| | ... | of traffic into table and setup 'deny' traffic +| | ... | and check if traffic is dropped. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} +| | ... | ${tg_to_dut2_mac} +| | And Vpp Route Add +| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} +| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | Then Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 110 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 80 +| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP | destination +| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 0 | 80 +| | ${table_index} | ${skip_n} | ${match_n}= | When Vpp Create Classify Table Hex +| | ... | ${dut1_node} | ${hex_mask} +| | And Vpp Configure Classify Session Hex +| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n} +| | ... | ${hex_value} +| | And Vpp Enable Input Acl Interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index} +| | Then Send TCP or UDP packet should failed | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 80 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 20 | 110 + +| VPP drops packets based on IPv4 UDP src + dst ports +| | [Documentation] | Create classify table on VPP, add source and destination +| | ... | UDP port of traffic into table and setup 'deny' traffic +| | ... | and check if traffic is dropped. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} +| | And Add Arp On Dut +| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW} +| | ... | ${tg_to_dut2_mac} +| | And Vpp Route Add +| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} +| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | Then Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20 +| | ${hex_mask}= | Compute Classify Hex Mask | ${ip_version} | UDP +| | ... | source + destination +| | ${hex_value}= | Compute Classify Hex Value | ${hex_mask} | 80 | 20 +| | ${table_index} | ${skip_n} | ${match_n}= | When Vpp Create Classify Table Hex +| | ... | ${dut1_node} | ${hex_mask} +| | And Vpp Configure Classify Session Hex +| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n} +| | ... | ${hex_value} +| | And Vpp Enable Input Acl Interface +| | ... | ${dut1_node} | ${dut1_to_tg} | ${ip_version} | ${table_index} +| | Then Send TCP or UDP packet should failed | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 80 | 20 +| | And Send TCP or UDP packet | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac} +| | ... | ${tg_to_dut2} | ${dut1_to_tg_mac} | UDP | 110 | 25