X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=doc%2Fbuild-sdk-meson.txt;fp=doc%2Fbuild-sdk-meson.txt;h=9618e759eac6b275e903e33ae9a507963611d3cd;hb=ca33590b6af032bff57d9cc70455660466a654b2;hp=0000000000000000000000000000000000000000;hpb=169a9de21e263aa6599cdc2d87a45ae158d9f509;p=deb_dpdk.git

diff --git a/doc/build-sdk-meson.txt b/doc/build-sdk-meson.txt
new file mode 100644
index 00000000..9618e759
--- /dev/null
+++ b/doc/build-sdk-meson.txt
@@ -0,0 +1,203 @@
+INSTALLING DPDK USING THE MESON BUILD SYSTEM
+---------------------------------------------
+
+NOTE: Compiling and installing DPDK using ``meson`` and ``ninja``, rather
+than using ``make`` (GNU make) is EXPERIMENTAL. Official builds of DPDK
+should always be done using ``make``, as described in the ``Getting Started
+Guide`` documentation, and at "http://dpdk.org/doc/quick-start".
+
+Summary
+--------
+For many platforms, compiling and installing DPDK should work using the
+following set of commands::
+
+	meson build
+	cd build
+	ninja
+	ninja install
+
+This will compile DPDK in the ``build`` subdirectory, and then install the
+resulting libraries, drivers and header files onto the system - generally
+in /usr/local. A package-config file, ``libdpdk.pc``,  for DPDK will also
+be installed to allow ease of compiling and linking with applications.
+
+After installation, to use DPDK, the necessary CFLAG and LDFLAG variables
+can be got from pkg-config::
+
+	pkg-config --cflags libdpdk
+	pkg-config --libs libdpdk
+
+More detail on each of these steps can be got from the following sections.
+
+
+Getting the Tools
+------------------
+
+The ``meson`` tool is used to configure a DPDK build. On most Linux
+distributions this can be got using the local package management system,
+e.g. ``dnf install meson`` or ``apt-get install meson``. If meson is not
+available as a suitable package, it can also be installed using the Python
+3 ``pip`` tool, e.g. ``pip3 install meson``. Version 0.42 of meson is
+recommended - if the version packaged is too old, the latest version is
+generally available from "pip".
+
+The other dependency for building is the ``ninja`` tool, which acts similar
+to make and performs the actual build using information provided by meson.
+Installing meson will, in many cases, also install ninja, but, if not
+already installed, it too is generally packaged by most Linux distributions.
+If not available as a package, it can be downloaded as source or binary from
+https://ninja-build.org/
+
+
+Configuring the Build
+----------------------
+
+To configure a build, run the meson tool, passing the path to the directory
+to be used for the build e.g. ``meson build``, as shown above. If calling
+meson from somewhere other than the root directory of the DPDK project the
+path to the root directory should be passed as the first parameter, and the
+build path as the second. For example, to build DPDK in /tmp/dpdk-build::
+
+	user@host:/tmp$ meson ~user/dpdk dpdk-build
+
+Meson will then configure the build based on settings in the project's
+meson.build files, and by checking the build environment for e.g. compiler
+properties or the presence of dependencies, such as libpcap, or openssl
+libcrypto libraries. Once done, meson writes a ``build.ninja`` file in the
+build directory to be used to do the build itself when ninja is called.
+
+Tuning of the build is possible, both as part of the original meson call,
+or subsequently using ``meson configure`` command (``mesonconf`` in some
+older versions). Some options, such as ``buildtype``, or ``werror`` are
+built into meson, while others, such as ``max_lcores``, or the list of
+examples to build, are DPDK-specific. To have a list of all options
+available run ``meson configure`` in the build directory.
+
+Examples of adjusting the defaults when doing initial meson configuration.
+Project-specific options are passed used -Doption=value::
+
+	meson --werror werrorbuild  # build with warnings as errors
+
+	meson --buildtype=debug debugbuild  # build for debugging
+
+	meson -Dexamples=l3fwd,l2fwd fwdbuild  # build some examples as
+					# part of the normal DPDK build
+
+	meson -Dmax_lcores=8 smallbuild  # scale build for smaller systems
+
+Examples of setting the same options using meson configure::
+
+	meson configure -Dwerror=true
+
+	meson configure -Dbuildtype=debug
+
+	meson configure -Dexamples=l3fwd,l2fwd
+
+	meson configure -Dmax_lcores=8
+
+NOTE: once meson has been run to configure a build in a directory, it
+cannot be run again on the same directory. Instead ``meson configure``
+should be used to change the build settings within the directory, and when
+``ninja`` is called to do the build itself, it will trigger the necessary
+re-scan from meson.
+
+As well as those settings taken from ``meson configure``, other options
+such as the compiler to use can be passed via environment variables. For
+example::
+
+	CC=clang meson clang-build
+
+NOTE: for more comprehensive overriding of compilers or other environment
+settings, the tools for cross-compilation may be considered. However, for
+basic overriding of the compiler etc., the above form works as expected.
+
+
+Performing the Build
+---------------------
+
+Use ``ninja`` to perform the actual build inside the build folder
+previously configured. In most cases no arguments are necessary.
+
+Ninja accepts a number of flags which are similar to make. For example, to
+call ninja from outside the build folder, you can use ``ninja -C build``.
+Ninja also runs parallel builds by default, but you can limit this using
+the ``-j`` flag, e.g. ``ninja -j1 -v`` to do the build one step at a time,
+printing each command on a new line as it runs.
+
+
+Installing the Compiled Files
+------------------------------
+
+Use ``ninja install`` to install the required DPDK files onto the system.
+The install prefix defaults to ``/usr/local`` but can be used as with other
+options above. The environment variable ``DEST_DIR`` can be used to adjust
+the root directory for the install, for example when packaging.
+
+With the base install directory, the individual directories for libraries
+and headers are configurable. By default, the following will be the
+installed layout::
+
+	headers -> /usr/local/include
+	libraries -> /usr/local/lib64
+	drivers -> /usr/local/lib64/dpdk/drivers
+	libdpdk.pc -> /usr/local/lib64/pkgconfig
+
+For the drivers, these will also be symbolically linked into the library
+install directory, so that ld.so can find them in cases where one driver may
+depend on another, e.g. a NIC PMD depending upon the PCI bus driver. Within
+the EAL, the default search path for drivers will be set to the configured
+driver install path, so dynamically-linked applications can be run without
+having to pass in ``-d /path/to/driver`` options for standard drivers.
+
+
+Cross Compiling DPDK
+--------------------
+
+To cross-compile DPDK on a desired target machine we can use the following
+command::
+
+	meson cross-build --cross-file <target_machine_configuration>
+
+For example if the target machine is arm64 we can use the following
+command::
+	meson arm-build --cross-file config/arm/arm64_armv8_linuxapp_gcc
+
+where config/arm/arm64_armv8_linuxapp_gcc contains the following
+parameters::
+
+	[binaries]
+	c = 'aarch64-linux-gnu-gcc'
+	cpp = 'aarch64-linux-gnu-cpp'
+	ar = 'aarch64-linux-gnu-ar'
+
+	[host_machine]
+	system = 'linux'
+	cpu_family = 'aarch64'
+	cpu = 'armv8-a'
+	endian = 'little'
+
+
+Using the DPDK within an Application
+-------------------------------------
+
+To compile and link against DPDK within an application, pkg-config should
+be used to query the correct parameters. Examples of this are given in the
+makefiles for the example applications included with DPDK. They demonstrate
+how to link either against the DPDK shared libraries, or against the static
+versions of the same.
+
+From examples/helloworld/Makefile::
+
+	PC_FILE := $(shell pkg-config --path libdpdk)
+	CFLAGS += -O3 $(shell pkg-config --cflags libdpdk)
+	LDFLAGS_SHARED = $(shell pkg-config --libs libdpdk)
+	LDFLAGS_STATIC = -Wl,-Bstatic $(shell pkg-config --static --libs libdpdk)
+
+	build/$(APP)-shared: $(SRCS-y) Makefile $(PC_FILE) | build
+		$(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_SHARED)
+
+	build/$(APP)-static: $(SRCS-y) Makefile $(PC_FILE) | build
+		$(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_STATIC)
+
+	build:
+		@mkdir -p $@