X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=doc%2Fguides%2Fnics%2Fark.rst;fp=doc%2Fguides%2Fnics%2Fark.rst;h=a7c2590b4b5006604639d7d81b32fc10863b5378;hb=7595afa4d30097c1177b69257118d8ad89a539be;hp=0000000000000000000000000000000000000000;hpb=ce3d555e43e3795b5d9507fcfc76b7a0a92fd0d6;p=deb_dpdk.git diff --git a/doc/guides/nics/ark.rst b/doc/guides/nics/ark.rst new file mode 100644 index 00000000..a7c2590b --- /dev/null +++ b/doc/guides/nics/ark.rst @@ -0,0 +1,261 @@ +.. BSD LICENSE + + Copyright (c) 2015-2017 Atomic Rules LLC + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Atomic Rules LLC nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +ARK Poll Mode Driver +==================== + +The ARK PMD is a DPDK poll-mode driver for the Atomic Rules Arkville +(ARK) family of devices. + +More information can be found at the `Atomic Rules website +`_. + +Overview +-------- + +The Atomic Rules Arkville product is DPDK and AXI compliant product +that marshals packets across a PCIe conduit between host DPDK mbufs and +FPGA AXI streams. + +The ARK PMD, and the spirit of the overall Arkville product, +has been to take the DPDK API/ABI as a fixed specification; +then implement much of the business logic in FPGA RTL circuits. +The approach of *working backwards* from the DPDK API/ABI and having +the GPP host software *dictate*, while the FPGA hardware *copes*, +results in significant performance gains over a naive implementation. + +While this document describes the ARK PMD software, it is helpful to +understand what the FPGA hardware is and is not. The Arkville RTL +component provides a single PCIe Physical Function (PF) supporting +some number of RX/Ingress and TX/Egress Queues. The ARK PMD controls +the Arkville core through a dedicated opaque Core BAR (CBAR). +To allow users full freedom for their own FPGA application IP, +an independent FPGA Application BAR (ABAR) is provided. + +One popular way to imagine Arkville's FPGA hardware aspect is as the +FPGA PCIe-facing side of a so-called Smart NIC. The Arkville core does +not contain any MACs, and is link-speed independent, as well as +agnostic to the number of physical ports the application chooses to +use. The ARK driver exposes the familiar PMD interface to allow packet +movement to and from mbufs across multiple queues. + +However FPGA RTL applications could contain a universe of added +functionality that an Arkville RTL core does not provide or can +not anticipate. To allow for this expectation of user-defined +innovation, the ARK PMD provides a dynamic mechanism of adding +capabilities without having to modify the ARK PMD. + +The ARK PMD is intended to support all instances of the Arkville +RTL Core, regardless of configuration, FPGA vendor, or target +board. While specific capabilities such as number of physical +hardware queue-pairs are negotiated; the driver is designed to +remain constant over a broad and extendable feature set. + +Intentionally, Arkville by itself DOES NOT provide common NIC +capabilities such as offload or receive-side scaling (RSS). +These capabilities would be viewed as a gate-level "tax" on +Green-box FPGA applications that do not require such function. +Instead, they can be added as needed with essentially no +overhead to the FPGA Application. + +The ARK PMD also supports optional user extensions, through dynamic linking. +The ARK PMD user extensions are a feature of Arkville’s DPDK +net/ark poll mode driver, allowing users to add their +own code to extend the net/ark functionality without +having to make source code changes to the driver. One motivation for +this capability is that while DPDK provides a rich set of functions +to interact with NIC-like capabilities (e.g. MAC addresses and statistics), +the Arkville RTL IP does not include a MAC. Users can supply their +own MAC or custom FPGA applications, which may require control from +the PMD. The user extension is the means providing the control +between the user's FPGA application and the existing DPDK features via +the PMD. + +Device Parameters +------------------- + +The ARK PMD supports device parameters that are used for packet +routing and for internal packet generation and packet checking. This +section describes the supported parameters. These features are +primarily used for diagnostics, testing, and performance verification +under the guidance of an Arkville specialist. The nominal use of +Arkville does not require any configuration using these parameters. + +"Pkt_dir" + +The Packet Director controls connectivity between Arkville's internal +hardware components. The features of the Pkt_dir are only used for +diagnostics and testing; it is not intended for nominal use. The full +set of features are not published at this level. + +Format: +Pkt_dir=0x00110F10 + +"Pkt_gen" + +The packet generator parameter takes a file as its argument. The file +contains configuration parameters used internally for regression +testing and are not intended to be published at this level. The +packet generator is an internal Arkville hardware component. + +Format: +Pkt_gen=./config/pg.conf + +"Pkt_chkr" + +The packet checker parameter takes a file as its argument. The file +contains configuration parameters used internally for regression +testing and are not intended to be published at this level. The +packet checker is an internal Arkville hardware component. + +Format: +Pkt_chkr=./config/pc.conf + + +Data Path Interface +------------------- + +Ingress RX and Egress TX operation is by the nominal DPDK API . +The driver supports single-port, multi-queue for both RX and TX. + +Refer to ``ark_ethdev.h`` for the list of supported methods to +act upon RX and TX Queues. + +Configuration Information +------------------------- + +**DPDK Configuration Parameters** + + The following configuration options are available for the ARK PMD: + + * **CONFIG_RTE_LIBRTE_ARK_PMD** (default y): Enables or disables inclusion + of the ARK PMD driver in the DPDK compilation. + + * **CONFIG_RTE_LIBRTE_ARK_PAD_TX** (default y): When enabled TX + packets are padded to 60 bytes to support downstream MACS. + + * **CONFIG_RTE_LIBRTE_ARK_DEBUG_RX** (default n): Enables or disables debug + logging and internal checking of RX ingress logic within the ARK PMD driver. + + * **CONFIG_RTE_LIBRTE_ARK_DEBUG_TX** (default n): Enables or disables debug + logging and internal checking of TX egress logic within the ARK PMD driver. + + * **CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS** (default n): Enables or disables debug + logging of detailed packet and performance statistics gathered in + the PMD and FPGA. + + * **CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE** (default n): Enables or disables debug + logging of detailed PMD events and status. + + +Building DPDK +------------- + +See the :ref:`DPDK Getting Started Guide for Linux ` for +instructions on how to build DPDK. + +By default the ARK PMD library will be built into the DPDK library. + +For configuring and using UIO and VFIO frameworks, please also refer :ref:`the +documentation that comes with DPDK suite `. + +Supported ARK RTL PCIe Instances +-------------------------------- + +ARK PMD supports the following Arkville RTL PCIe instances including: + +* ``1d6c:100d`` - AR-ARKA-FX0 [Arkville 32B DPDK Data Mover] +* ``1d6c:100e`` - AR-ARKA-FX1 [Arkville 64B DPDK Data Mover] + +Supported Operating Systems +--------------------------- + +Any Linux distribution fulfilling the conditions described in ``System Requirements`` +section of :ref:`the DPDK documentation ` or refer to *DPDK +Release Notes*. ARM and PowerPC architectures are not supported at this time. + + +Supported Features +------------------ + +* Dynamic ARK PMD extensions +* Multiple receive and transmit queues +* Jumbo frames up to 9K +* Hardware Statistics + +Unsupported Features +-------------------- + +Features that may be part of, or become part of, the Arkville RTL IP that are +not currently supported or exposed by the ARK PMD include: + +* PCIe SR-IOV Virtual Functions (VFs) +* Arkville's Packet Generator Control and Status +* Arkville's Packet Director Control and Status +* Arkville's Packet Checker Control and Status +* Arkville's Timebase Management + +Pre-Requisites +-------------- + +#. Prepare the system as recommended by DPDK suite. This includes environment + variables, hugepages configuration, tool-chains and configuration + +#. Insert igb_uio kernel module using the command 'modprobe igb_uio' + +#. Bind the intended ARK device to igb_uio module + +At this point the system should be ready to run DPDK applications. Once the +application runs to completion, the ARK PMD can be detached from igb_uio if necessary. + +Usage Example +------------- + +Follow instructions available in the document +:ref:`compiling and testing a PMD for a NIC ` to launch +**testpmd** with Atomic Rules ARK devices managed by librte_pmd_ark. + +Example output: + +.. code-block:: console + + [...] + EAL: PCI device 0000:01:00.0 on NUMA socket -1 + EAL: probe driver: 1d6c:100e rte_ark_pmd + EAL: PCI memory mapped at 0x7f9b6c400000 + PMD: eth_ark_dev_init(): Initializing 0:2:0.1 + ARKP PMD CommitID: 378f3a67 + Configuring Port 0 (socket 0) + Port 0: DC:3C:F6:00:00:01 + Checking link statuses... + Port 0 Link Up - speed 100000 Mbps - full-duplex + Done + testpmd>