X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=doc%2Fguides%2Fnics%2Fe1000em.rst;fp=doc%2Fguides%2Fnics%2Fe1000em.rst;h=265b147a0a0367e6276127e2b0861699eeeb78ae;hb=97f17497d162afdb82c8704bf097f0fee3724b2e;hp=0000000000000000000000000000000000000000;hpb=e04be89c2409570e0055b2cda60bd11395bb93b0;p=deb_dpdk.git diff --git a/doc/guides/nics/e1000em.rst b/doc/guides/nics/e1000em.rst new file mode 100644 index 00000000..265b147a --- /dev/null +++ b/doc/guides/nics/e1000em.rst @@ -0,0 +1,182 @@ +.. BSD LICENSE + Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +Driver for VM Emulated Devices +============================== + +The DPDK EM poll mode driver supports the following emulated devices: + +* qemu-kvm emulated Intel® 82540EM Gigabit Ethernet Controller (qemu e1000 device) + +* VMware* emulated Intel® 82545EM Gigabit Ethernet Controller + +* VMware emulated Intel® 8274L Gigabit Ethernet Controller. + +Validated Hypervisors +--------------------- + +The validated hypervisors are: + +* KVM (Kernel Virtual Machine) with Qemu, version 0.14.0 + +* KVM (Kernel Virtual Machine) with Qemu, version 0.15.1 + +* VMware ESXi 5.0, Update 1 + +Recommended Guest Operating System in Virtual Machine +----------------------------------------------------- + +The recommended guest operating system in a virtualized environment is: + +* Fedora* 18 (64-bit) + +For supported kernel versions, refer to the *DPDK Release Notes*. + +Setting Up a KVM Virtual Machine +-------------------------------- + +The following describes a target environment: + +* Host Operating System: Fedora 14 + +* Hypervisor: KVM (Kernel Virtual Machine) with Qemu version, 0.14.0 + +* Guest Operating System: Fedora 14 + +* Linux Kernel Version: Refer to the DPDK Getting Started Guide + +* Target Applications: testpmd + +The setup procedure is as follows: + +#. Download qemu-kvm-0.14.0 from + `http://sourceforge.net/projects/kvm/files/qemu-kvm/ `_ + and install it in the Host OS using the following steps: + + When using a recent kernel (2.6.25+) with kvm modules included: + + .. code-block:: console + + tar xzf qemu-kvm-release.tar.gz cd qemu-kvm-release + ./configure --prefix=/usr/local/kvm + make + sudo make install + sudo /sbin/modprobe kvm-intel + + When using an older kernel or a kernel from a distribution without the kvm modules, + you must download (from the same link), compile and install the modules yourself: + + .. code-block:: console + + tar xjf kvm-kmod-release.tar.bz2 + cd kvm-kmod-release + ./configure + make + sudo make install + sudo /sbin/modprobe kvm-intel + + Note that qemu-kvm installs in the /usr/local/bin directory. + + For more details about KVM configuration and usage, please refer to: + `http://www.linux-kvm.org/page/HOWTO1 `_. + +#. Create a Virtual Machine and install Fedora 14 on the Virtual Machine. + This is referred to as the Guest Operating System (Guest OS). + +#. Start the Virtual Machine with at least one emulated e1000 device. + + .. note:: + + The Qemu provides several choices for the emulated network device backend. + Most commonly used is a TAP networking backend that uses a TAP networking device in the host. + For more information about Qemu supported networking backends and different options for configuring networking at Qemu, + please refer to: + + — `http://www.linux-kvm.org/page/Networking `_ + + — `http://wiki.qemu.org/Documentation/Networking `_ + + — `http://qemu.weilnetz.de/qemu-doc.html `_ + + For example, to start a VM with two emulated e1000 devices, issue the following command: + + .. code-block:: console + + /usr/local/kvm/bin/qemu-system-x86_64 -cpu host -smp 4 -hda qemu1.raw -m 1024 + -net nic,model=e1000,vlan=1,macaddr=DE:AD:1E:00:00:01 + -net tap,vlan=1,ifname=tapvm01,script=no,downscript=no + -net nic,model=e1000,vlan=2,macaddr=DE:AD:1E:00:00:02 + -net tap,vlan=2,ifname=tapvm02,script=no,downscript=no + + where: + + — -m = memory to assign + + — -smp = number of smp cores + + — -hda = virtual disk image + + This command starts a new virtual machine with two emulated 82540EM devices, + backed up with two TAP networking host interfaces, tapvm01 and tapvm02. + + .. code-block:: console + + # ip tuntap show + tapvm01: tap + tapvm02: tap + +#. Configure your TAP networking interfaces using ip/ifconfig tools. + +#. Log in to the guest OS and check that the expected emulated devices exist: + + .. code-block:: console + + # lspci -d 8086:100e + 00:04.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 03) + 00:05.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 03) + +#. Install the DPDK and run testpmd. + +Known Limitations of Emulated Devices +------------------------------------- + +The following are known limitations: + +#. The Qemu e1000 RX path does not support multiple descriptors/buffers per packet. + Therefore, rte_mbuf should be big enough to hold the whole packet. + For example, to allow testpmd to receive jumbo frames, use the following: + + testpmd [options] -- --mbuf-size= + +#. Qemu e1000 does not validate the checksum of incoming packets. + +#. Qemu e1000 only supports one interrupt source, so link and Rx interrupt should be exclusive. + +#. Qemu e1000 does not support interrupt auto-clear, application should disable interrupt immediately when woken up.