X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=doc%2Fguides%2Fnics%2Fenic.rst;fp=doc%2Fguides%2Fnics%2Fenic.rst;h=c535b589c777c6d946a6e93dca2fb251ebedec1f;hb=6b3e017e5d25f15da73f7700f7f2ac553ef1a2e9;hp=266920223ac65e400aac19184b862bcf946692f8;hpb=32e04ea00cd159613e04acef75e52bfca6eeff2f;p=deb_dpdk.git

diff --git a/doc/guides/nics/enic.rst b/doc/guides/nics/enic.rst
index 26692022..c535b589 100644
--- a/doc/guides/nics/enic.rst
+++ b/doc/guides/nics/enic.rst
@@ -119,7 +119,26 @@ Configuration information
 
     Only one interrupt per vNIC interface should be configured in the UCS
     manager regardless of the number receive/transmit queues. The ENIC PMD
-    uses this interrupt to   get information about errors in the fast path.
+    uses this interrupt to get information about link status and errors
+    in the fast path.
+
+.. _enic-flow-director:
+
+Flow director support
+---------------------
+
+Advanced filtering support was added to 1300 series VIC firmware starting
+with version 2.0.13 for C-series UCS servers and version 3.1.2 for UCSM
+managed blade servers. In order to enable advanced filtering the 'Advanced
+filter' radio button should be enabled via CIMC or UCSM followed by a reboot
+of the server.
+
+With advanced filters, perfect matching of all fields of IPv4, IPv6 headers
+as well as TCP, UDP and SCTP L4 headers is available through flow director.
+Masking of these feilds for partial match is also supported.
+
+Without advanced filter support, the flow director is limited to IPv4
+perfect filtering of the 5-tuple with no masking of fields supported.
 
 Limitations
 -----------
@@ -144,6 +163,12 @@ Limitations
      vlan_offload |= ETH_VLAN_STRIP_OFFLOAD;
      rte_eth_dev_set_vlan_offload(port, vlan_offload);
 
+- Limited flow director support on 1200 series and 1300 series Cisco VIC
+  adapters with old firmware. Please see :ref:`enic-flow-director`.
+
+- Flow director features are not supported on generation 1 Cisco VIC adapters
+  (M81KR and P81E)
+
 How to build the suite?
 -----------------------
 The build instructions for the DPDK suite should be followed. By default
@@ -169,9 +194,6 @@ ENIC PMD supports all recent generations of Cisco VIC adapters including:
 - VIC 1385
 - VIC 1387
 
-- Flow director features are not supported on generation 1 Cisco VIC adapters
-   (M81KR and P81E)
-
 Supported Operating Systems
 ---------------------------
 Any Linux distribution fulfilling the conditions described in Dependencies
@@ -186,8 +208,7 @@ Supported features
 - IP checksum offload
 - Receive side VLAN stripping
 - Multiple receive and transmit queues
-- Flow Director ADD, UPDATE, DELETE, STATS operation support for IPV4 5-TUPLE
-  flows
+- Flow Director ADD, UPDATE, DELETE, STATS operation support IPv4 and IPv6
 - Promiscuous mode
 - Setting RX VLAN (supported via UCSM/CIMC only)
 - VLAN filtering (supported via UCSM/CIMC only)