X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=doc%2Fguides%2Fprog_guide%2Fhash_lib.rst;fp=doc%2Fguides%2Fprog_guide%2Fhash_lib.rst;h=7944640c3dd060946d204faa57fc01c9c8b8a1aa;hb=97f17497d162afdb82c8704bf097f0fee3724b2e;hp=0000000000000000000000000000000000000000;hpb=e04be89c2409570e0055b2cda60bd11395bb93b0;p=deb_dpdk.git diff --git a/doc/guides/prog_guide/hash_lib.rst b/doc/guides/prog_guide/hash_lib.rst new file mode 100644 index 00000000..7944640c --- /dev/null +++ b/doc/guides/prog_guide/hash_lib.rst @@ -0,0 +1,254 @@ +.. BSD LICENSE + Copyright(c) 2010-2015 Intel Corporation. All rights reserved. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +.. _Hash_Library: + +Hash Library +============ + +The DPDK provides a Hash Library for creating hash table for fast lookup. +The hash table is a data structure optimized for searching through a set of entries that are each identified by a unique key. +For increased performance the DPDK Hash requires that all the keys have the same number of bytes which is set at the hash creation time. + +Hash API Overview +----------------- + +The main configuration parameters for the hash are: + +* Total number of hash entries + +* Size of the key in bytes + +The hash also allows the configuration of some low-level implementation related parameters such as: + +* Hash function to translate the key into a bucket index + +The main methods exported by the hash are: + +* Add entry with key: The key is provided as input. If a new entry is successfully added to the hash for the specified key, + or there is already an entry in the hash for the specified key, then the position of the entry is returned. + If the operation was not successful, for example due to lack of free entries in the hash, then a negative value is returned; + +* Delete entry with key: The key is provided as input. If an entry with the specified key is found in the hash, + then the entry is removed from the hash and the position where the entry was found in the hash is returned. + If no entry with the specified key exists in the hash, then a negative value is returned + +* Lookup for entry with key: The key is provided as input. If an entry with the specified key is found in the hash (lookup hit), + then the position of the entry is returned, otherwise (lookup miss) a negative value is returned. + +Apart from these method explained above, the API allows the user three more options: + +* Add / lookup / delete with key and precomputed hash: Both the key and its precomputed hash are provided as input. This allows + the user to perform these operations faster, as hash is already computed. + +* Add / lookup with key and data: A pair of key-value is provided as input. This allows the user to store + not only the key, but also data which may be either a 8-byte integer or a pointer to external data (if data size is more than 8 bytes). + +* Combination of the two options above: User can provide key, precomputed hash and data. + +Also, the API contains a method to allow the user to look up entries in bursts, achieving higher performance +than looking up individual entries, as the function prefetches next entries at the time it is operating +with the first ones, which reduces significantly the impact of the necessary memory accesses. +Notice that this method uses a pipeline of 8 entries (4 stages of 2 entries), so it is highly recommended +to use at least 8 entries per burst. + +The actual data associated with each key can be either managed by the user using a separate table that +mirrors the hash in terms of number of entries and position of each entry, +as shown in the Flow Classification use case describes in the following sections, +or stored in the hash table itself. + +The example hash tables in the L2/L3 Forwarding sample applications defines which port to forward a packet to based on a packet flow identified by the five-tuple lookup. +However, this table could also be used for more sophisticated features and provide many other functions and actions that could be performed on the packets and flows. + +Multi-process support +--------------------- + +The hash library can be used in a multi-process environment, minding that only lookups are thread-safe. +The only function that can only be used in single-process mode is rte_hash_set_cmp_func(), which sets up +a custom compare function, which is assigned to a function pointer (therefore, it is not supported in +multi-process mode). + +Implementation Details +---------------------- + +The hash table has two main tables: + +* First table is an array of entries which is further divided into buckets, + with the same number of consecutive array entries in each bucket. Each entry contains the computed primary + and secondary hashes of a given key (explained below), and an index to the second table. + +* The second table is an array of all the keys stored in the hash table and its data associated to each key. + +The hash library uses the cuckoo hash method to resolve collisions. +For any input key, there are two possible buckets (primary and secondary/alternative location) +where that key can be stored in the hash, therefore only the entries within those bucket need to be examined +when the key is looked up. +The lookup speed is achieved by reducing the number of entries to be scanned from the total +number of hash entries down to the number of entries in the two hash buckets, +as opposed to the basic method of linearly scanning all the entries in the array. +The hash uses a hash function (configurable) to translate the input key into a 4-byte key signature. +The bucket index is the key signature modulo the number of hash buckets. + +Once the buckets are identified, the scope of the hash add, +delete and lookup operations is reduced to the entries in those buckets (it is very likely that entries are in the primary bucket). + +To speed up the search logic within the bucket, each hash entry stores the 4-byte key signature together with the full key for each hash entry. +For large key sizes, comparing the input key against a key from the bucket can take significantly more time than +comparing the 4-byte signature of the input key against the signature of a key from the bucket. +Therefore, the signature comparison is done first and the full key comparison done only when the signatures matches. +The full key comparison is still necessary, as two input keys from the same bucket can still potentially have the same 4-byte hash signature, +although this event is relatively rare for hash functions providing good uniform distributions for the set of input keys. + +Example of lookup: + +First of all, the primary bucket is identified and entry is likely to be stored there. +If signature was stored there, we compare its key against the one provided and return the position +where it was stored and/or the data associated to that key if there is a match. +If signature is not in the primary bucket, the secondary bucket is looked up, where same procedure +is carried out. If there is no match there either, key is considered not to be in the table. + +Example of addition: + +Like lookup, the primary and secondary buckets are identified. If there is an empty slot in +the primary bucket, primary and secondary signatures are stored in that slot, key and data (if any) are added to +the second table and an index to the position in the second table is stored in the slot of the first table. +If there is no space in the primary bucket, one of the entries on that bucket is pushed to its alternative location, +and the key to be added is inserted in its position. +To know where the alternative bucket of the evicted entry is, the secondary signature is looked up and alternative bucket index +is calculated from doing the modulo, as seen above. If there is room in the alternative bucket, the evicted entry +is stored in it. If not, same process is repeated (one of the entries gets pushed) until a non full bucket is found. +Notice that despite all the entry movement in the first table, the second table is not touched, which would impact +greatly in performance. + +In the very unlikely event that table enters in a loop where same entries are being evicted indefinitely, +key is considered not able to be stored. +With random keys, this method allows the user to get around 90% of the table utilization, without +having to drop any stored entry (LRU) or allocate more memory (extended buckets). + +Entry distribution in hash table +-------------------------------- + +As mentioned above, Cuckoo hash implementation pushes elements out of their bucket, +if there is a new entry to be added which primary location coincides with their current bucket, +being pushed to their alternative location. +Therefore, as user adds more entries to the hash table, distribution of the hash values +in the buckets will change, being most of them in their primary location and a few in +their secondary location, which the later will increase, as table gets busier. +This information is quite useful, as performance may be lower as more entries +are evicted to their secondary location. + +See the tables below showing example entry distribution as table utilization increases. + +.. _table_hash_lib_1: + +.. table:: Entry distribution measured with an example table with 1024 random entries using jhash algorithm + + +--------------+-----------------------+-------------------------+ + | % Table used | % In Primary location | % In Secondary location | + +==============+=======================+=========================+ + | 25 | 100 | 0 | + +--------------+-----------------------+-------------------------+ + | 50 | 96.1 | 3.9 | + +--------------+-----------------------+-------------------------+ + | 75 | 88.2 | 11.8 | + +--------------+-----------------------+-------------------------+ + | 80 | 86.3 | 13.7 | + +--------------+-----------------------+-------------------------+ + | 85 | 83.1 | 16.9 | + +--------------+-----------------------+-------------------------+ + | 90 | 77.3 | 22.7 | + +--------------+-----------------------+-------------------------+ + | 95.8 | 64.5 | 35.5 | + +--------------+-----------------------+-------------------------+ + +| + +.. _table_hash_lib_2: + +.. table:: Entry distribution measured with an example table with 1 million random entries using jhash algorithm + + +--------------+-----------------------+-------------------------+ + | % Table used | % In Primary location | % In Secondary location | + +==============+=======================+=========================+ + | 50 | 96 | 4 | + +--------------+-----------------------+-------------------------+ + | 75 | 86.9 | 13.1 | + +--------------+-----------------------+-------------------------+ + | 80 | 83.9 | 16.1 | + +--------------+-----------------------+-------------------------+ + | 85 | 80.1 | 19.9 | + +--------------+-----------------------+-------------------------+ + | 90 | 74.8 | 25.2 | + +--------------+-----------------------+-------------------------+ + | 94.5 | 67.4 | 32.6 | + +--------------+-----------------------+-------------------------+ + +.. note:: + + Last values on the tables above are the average maximum table + utilization with random keys and using Jenkins hash function. + +Use Case: Flow Classification +----------------------------- + +Flow classification is used to map each input packet to the connection/flow it belongs to. +This operation is necessary as the processing of each input packet is usually done in the context of their connection, +so the same set of operations is applied to all the packets from the same flow. + +Applications using flow classification typically have a flow table to manage, with each separate flow having an entry associated with it in this table. +The size of the flow table entry is application specific, with typical values of 4, 16, 32 or 64 bytes. + +Each application using flow classification typically has a mechanism defined to uniquely identify a flow based on +a number of fields read from the input packet that make up the flow key. +One example is to use the DiffServ 5-tuple made up of the following fields of the IP and transport layer packet headers: +Source IP Address, Destination IP Address, Protocol, Source Port, Destination Port. + +The DPDK hash provides a generic method to implement an application specific flow classification mechanism. +Given a flow table implemented as an array, the application should create a hash object with the same number of entries as the flow table and +with the hash key size set to the number of bytes in the selected flow key. + +The flow table operations on the application side are described below: + +* Add flow: Add the flow key to hash. + If the returned position is valid, use it to access the flow entry in the flow table for adding a new flow or + updating the information associated with an existing flow. + Otherwise, the flow addition failed, for example due to lack of free entries for storing new flows. + +* Delete flow: Delete the flow key from the hash. If the returned position is valid, + use it to access the flow entry in the flow table to invalidate the information associated with the flow. + +* Lookup flow: Lookup for the flow key in the hash. + If the returned position is valid (flow lookup hit), use the returned position to access the flow entry in the flow table. + Otherwise (flow lookup miss) there is no flow registered for the current packet. + +References +---------- + +* Donald E. Knuth, The Art of Computer Programming, Volume 3: Sorting and Searching (2nd Edition), 1998, Addison-Wesley Professional