X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=docs%2Flab%2FTestbeds_Xeon_Skx_Arm_Atom.md;h=1875c31b4aa55c74cdec49bf8815134450f44dcc;hb=743e97e25c04b0c890ec765fdd85e38e103dc981;hp=90331a0afb09d7635d3c116c8be299965b61eee7;hpb=7a68b45126c805dc0e12dac41b810495a97bf88f;p=csit.git diff --git a/docs/lab/Testbeds_Xeon_Skx_Arm_Atom.md b/docs/lab/Testbeds_Xeon_Skx_Arm_Atom.md index 90331a0afb..1875c31b4a 100644 --- a/docs/lab/Testbeds_Xeon_Skx_Arm_Atom.md +++ b/docs/lab/Testbeds_Xeon_Skx_Arm_Atom.md @@ -10,9 +10,10 @@ This is a low-level design implemented as an extensions of FD.io CSIT lab to acc 3. 3-node Xeon. perf. skx. skx. 2. 4. 2. 6. 4. tcp-l47. tcp-stack. skx. ps1. 1. 1. 1. 1. 5. atom-netgate. perf+func. net. skx. 1. 3. 1. 1. - 6. aarch64-d05 perf+func. arm. skx. 2. 2. 1. 1. - 7. aarch64-mcbin perf arm. skx. 1. 2. 1. 1. - Total skx_node: 20. + 6. aarch64-d05 perf arm. skx. 1. 2. 1. 1/2. + 7. aarch64-mcbin perf arm. skx. 1. 2. 1. 1/2. + 8. 1-node aarch64 func arm. n/a. 1. 1. 0. 0. + Total skx_node: 19. ``` ### 1-Node Xeon Testbeds @@ -24,10 +25,14 @@ Four 2-node Xeon testbeds (are expected to be built|are built), with each testbe ### 3-Node Xeon Testbeds Two 3-node Xeon testbeds (are expected to be built|are built), with each testbed using two SUTs (Type-1 server) and one TG (Type-2 server) connected in full-mesh triangle. NIC cards placement into slots and NIC ports connectivity is following the testbed specification included in next sections. -### Arm Testbeds -One 3-node Huawei testbeds (are expected to be built|are built), with each testbed using two SUTs (Type-3 server) and one TG (Type-2 server) connected in full-mesh triangle. +### 1-Node Arm Marvell ThunderX2 Testbed +One 1-node ThunderX2 testbed for VPP_Device tests is expected to be built using one SUT (Type-9 server), with NIC ports connected back-to-back. -One 3-node Marvell testbeds (are expected to be built|are built), with each testbed using two SUTs (Type-4 server) and one TG (Type-2 server) connected in full-mesh triangle. +### 3-Node Arm Huawei TaiShan Testbed +One 3-node TaiShan testbed is built, with each testbed using two SUTs (Type-3 server) and one TG (Type-2 server) connected in full-mesh triangle. NIC cards placement into slots and NIC ports connectivity is following the testbed specification included in next sections. + +### 3-Node Arm Marvell MACCHIATObin Testbed +One 3-node MACCHIATObin testbeds is built, with each testbed using two SUTs (Type-4 server) and one TG (Type-2 server) connected in full-mesh triangle. Built-in NIC ports connectivity is following the testbed specification included in next sections. ### TCP/IP and L47 Testbeds One 2-node Ixia PS One and Xeon server testbed, for TCP/IP host stack tests. @@ -53,6 +58,11 @@ One 3-node Atom (Netgate based) testbed is built consisting of three SUTs (Type- ### Arm Servers ``` 1. Arm Cortex A-72 servers + - 1 * ThunderX2 + - Chassis: Marvell ThunderX2 + - Processors: 2* ThunderX2 CN9975 ~ 112* ThunderX2. + - RAM Memory: 4* 32GB RDIMM + - Disks: 1* 480GB SSD Micron, 1* 1000GB HDD Seagate_25 - 2 * Huawei TaiShan 2280. - Chassis: Huawei TaiShan 2280. - Processors: 1* hip07-d05 ~ 64* Arm Cortex-A72. @@ -68,20 +78,21 @@ One 3-node Atom (Netgate based) testbed is built consisting of three SUTs (Type- Platform Name and Specification | Role | Status | Hostname | IP | IPMI | Cores | RAM | Ethernet | Distro ------------------------------- | ---- | ------ | -------- | -- | ---- | ----- | --- | -------- | ------ [SoftIron OverDrive 1000](https://softiron.com/development-tools/overdrive-1000/) | CI build server | Up, Not Running Jobs | softiron-1 | 10.30.51.12 | N/A | 4 | 8GB | | openSUSE - | CI build server | Up, Not Running Jobs | softiron-2 | 10.30.51.13 | N/A | 4 | 8GB | | openSUSE - | CI build server | Up, Not Running Jobs | softiron-3 | 10.30.51.14 | N/A | 4 | 8GB | | openSUSE -[Cavium ThunderX](https://cavium.com/product-thunderx-arm-processors.html) | CI build server | Up, Running VPP CI | nomad3arm | 10.30.51.38 | 10.30.50.38 | 96 | 128GB | 3x40GbE QSFP+ / 4x10GbE SFP+ | Ubuntu 16.04 - | CI build server | Up, Running VPP CI | nomad4arm | 10.30.51.39 | 10.30.50.39 | 96 | 128GB | 3x40GbE QSFP+ / 4x10GbE SFP+ | Ubuntu 16.04 - | CI build server | Up, Running VPP CI | nomad5arm | 10.30.51.40 | 10.30.50.40 | 96 | 128GB | 3x40GbE QSFP+ / 4x10GbE SFP+ | Ubuntu 16.04 - | CI build server | Up, Not Running Jobs, USB_NIC broken, QSFP wiring to be added | fdio-cavium4 | 10.30.51.65 | 10.30.50.65 | 96 | 256GB | 2xQSFP+ / USB Ethernet | Ubuntu 18.04.1 - | VPP dev debug | Up | fdio-cavium5 | 10.30.51.66 | 10.30.50.66 | 96 | 256GB | 2xQSFP+ / USB Ethernet | Ubuntu 18.04.1 - | CI build server | Up, Not Running Jobs, USB_NIC broken, QSFP wiring to be added | fdio-cavium6 | 10.30.51.67 | 10.30.50.67 | 96 | 256GB | 2xQSFP+ / USB Ethernet | Ubuntu 16.04.1 - | VPP dev debug | Up | fdio-cavium7 | 10.30.51.68 | 10.30.50.68 | 96 | 256GB | 2xQSFP+ / USB Ethernet | Ubuntu 16.04.1 -Huawei TaiShan 2280 | CSIT Performance | Up, Manual perf experiments | s15-t33-sut1 | 10.30.51.36 | 10.30.50.36 | 64 | 128GB | 2x10GbE SFP+ Intel 82599 / 2x25GbE SFP28 Mellanox CX-4 | Ubuntu 17.10 - | CSIT Performance | Up, Manual perf experiments | s16-t33-sut2 | 10.30.51.37 | 10.30.50.37 | 64 | 128GB | 2x10GbE SFP+ Intel 82599 / 2x25GbE SFP28 Mellanox CX-4 | Ubuntu 17.10 + | | CI build server | Up, Not Running Jobs | softiron-2 | 10.30.51.13 | N/A | 4 | 8GB | | openSUSE + | | CI build server | Up, Not Running Jobs | softiron-3 | 10.30.51.14 | N/A | 4 | 8GB | | openSUSE +[Marvell ThunderX](https://www.marvell.com/server-processors/thunderx-arm-processors/) | CI build server | Up, Running VPP CI | nomad3arm | 10.30.51.38 | 10.30.50.38 | 96 | 128GB | 3x40GbE QSFP+ / 4x10GbE SFP+ | Ubuntu 16.04 + | | CI build server | Up, Running VPP CI | nomad4arm | 10.30.51.39 | 10.30.50.39 | 96 | 128GB | 3x40GbE QSFP+ / 4x10GbE SFP+ | Ubuntu 16.04 + | | CI build server | Up, Running VPP CI | nomad5arm | 10.30.51.40 | 10.30.50.40 | 96 | 128GB | 3x40GbE QSFP+ / 4x10GbE SFP+ | Ubuntu 16.04 + | | CI build server | Up, Not Running Jobs, USB_NIC broken, QSFP wiring to be added | nomad6arm | 10.30.51.65 | 10.30.50.65 | 96 | 256GB | 2xQSFP+ / USB Ethernet | Ubuntu 18.04.1 + | | VPP dev debug | Up | nomad7arm | 10.30.51.66 | 10.30.50.66 | 96 | 256GB | 2xQSFP+ / USB Ethernet | Ubuntu 18.04.1 + | | CI build server | Up, Not Running Jobs, USB_NIC broken, QSFP wiring to be added | nomad8arm | 10.30.51.67 | 10.30.50.67 | 96 | 256GB | 2xQSFP+ / USB Ethernet | Ubuntu 16.04.1 + | | VPP dev debug | Up | nomad9arm | 10.30.51.68 | 10.30.50.68 | 96 | 256GB | 2xQSFP+ / USB Ethernet | Ubuntu 16.04.1 +[Marvell ThunderX2](https://www.marvell.com/server-processors/thunderx2-arm-processors/) | VPP device server | Being Provisioned | s27-t13-sut1 | 10.30.51.69 | 10.30.50.69 | 112 | 128GB | 3x40GbE QSFP+ XL710-QDA2 | Ubuntu 18.04.1 +Huawei TaiShan 2280 | CSIT Performance | Up, Manual perf experiments | s17-t33-sut1 | 10.30.51.36 | 10.30.50.36 | 64 | 128GB | 2x10GbE SFP+ Intel 82599 / 2x25GbE SFP28 Mellanox CX-4 | Ubuntu 17.10 + | | CSIT Performance | Up, Manual perf experiments | s18-t33-sut2 | 10.30.51.37 | 10.30.50.37 | 64 | 128GB | 2x10GbE SFP+ Intel 82599 / 2x25GbE SFP28 Mellanox CX-4 | Ubuntu 17.10 [Marvell MACCHIATObin](http://macchiatobin.net/) | CSIT Performance | Up, Manual experiments, Full Skx TG too much for it - suggest to use LXC/DRC TG(!) | s20-t34-sut1 | 10.30.51.41 | 10.30.51.49, then connect to /dev/ttyUSB0 | 4 | 16GB | 2x10GbE SFP+ | Ubuntu 16.04.4 - | CSIT Performance | Up, Manual experiments, Full Skx TG too much for it - suggest to use LXC/DRC TG(!) | s21-t34-sut2 | 10.30.51.42 | 10.30.51.49, then connect to /dev/ttyUSB1 | 4 | 16GB | 2x10GbE SFP+ | Ubuntu 16.04.5 - | VPP dev debug | Up, Manual VPP Device experiments, Full Skx TG too much for it - suggest to use LXC/DRC TG(!) | fdio-mcbin3 | 10.30.51.43 | 10.30.51.49, then connect to /dev/ttyUSB2 | 4 | 16GB | 2x10GbE SFP+ | Ubuntu 16.04.5 + | | CSIT Performance | Up, Manual experiments, Full Skx TG too much for it - suggest to use LXC/DRC TG(!) | s21-t34-sut2 | 10.30.51.42 | 10.30.51.49, then connect to /dev/ttyUSB1 | 4 | 16GB | 2x10GbE SFP+ | Ubuntu 16.04.5 + | | VPP dev debug | Up, Manual VPP Device experiments, Full Skx TG too much for it - suggest to use LXC/DRC TG(!) | fdio-mcbin3 | 10.30.51.43 | 10.30.51.49, then connect to /dev/ttyUSB2 | 4 | 16GB | 2x10GbE SFP+ | Ubuntu 16.04.5 ### Xeon and Atom Servers ``` @@ -443,6 +454,22 @@ Each server in 3-node Xeon topology has its NIC cards placed, and NIC cards and - s16-t32-tg1-c9/p2 - FUTURE 100GE-port2 ConnectX5-2p100GE. ``` +#### 1-Node Arm +``` +- Server17 [Type-3]: + - testbedname: testbed13. + - hostname: s27-t13-sut1. + - IPMI IP: 10.30.50.69 + - Host IP: 10.30.51.69 + - portnames: + - s27-t13-sut1-c1/p1 - 40GE-port1 XL710-QDA2-2p40GE. + - s27-t13-sut1-c1/p2 - 40GE-port2 XL710-QDA2-2p40GE. + - s27-t13-sut1-c3/p1 - 40GE-port1 XL710-QDA2-2p40GE. + - s27-t13-sut1-c3/p2 - 40GE-port2 XL710-QDA2-2p40GE. + - s27-t13-sut1-c6/p1 - 40GE-port1 XL710-QDA2-2p40GE. + - s27-t13-sut1-c6/p2 - 40GE-port2 XL710-QDA2-2p40GE. +``` + #### 3-Node Arm Note: Server19 (TG) is shared between testbed33 & testbed34 ``` @@ -452,22 +479,22 @@ Note: Server19 (TG) is shared between testbed33 & testbed34 - IPMI IP: 10.30.50.36 - Host IP: 10.30.51.36 - portnames: - - s17-t33-sut1-ca/p1 - 10GE-port1 82599-2p10GE. - - s17-t33-sut1-ca/p2 - 10GE-port2 82599-2p10GE. - - s17-t33-sut1-c2/p1 - 25GE-port1 cx4-2p25GE. - - s17-t33-sut1-c2/p2 - 25GE-port2 cx4-2p25GE. + - s17-t33-sut1-c6/p1 - 10GE-port1 82599-2p10GE. + - s17-t33-sut1-c6/p2 - 10GE-port2 82599-2p10GE. + - s17-t33-sut1-c4/p1 - 25GE-port1 cx4-2p25GE. + - s17-t33-sut1-c4/p2 - 25GE-port2 cx4-2p25GE. - Server18 [Type-3]: - testbedname: testbed33. - hostname: s18-t33-sut2. - IPMI IP: 10.30.50.37 - Host IP: 10.30.51.37 - portnames: - - s18-t33-sut2-ca/p1 - 10GE-port1 82599-2p10GE. - - s18-t33-sut2-ca/p2 - 10GE-port2 82599-2p10GE. - - s18-t33-sut2-c2/p1 - 25GE-port1 cx4-2p25GE. - - s18-t33-sut2-c2/p2 - 25GE-port2 cx4-2p25GE. + - s18-t33-sut2-c6/p1 - 10GE-port1 82599-2p10GE. + - s18-t33-sut2-c6/p2 - 10GE-port2 82599-2p10GE. + - s18-t33-sut2-c4/p1 - 25GE-port1 cx4-2p25GE. + - s18-t33-sut2-c4/p2 - 25GE-port2 cx4-2p25GE. - Server19 [Type-2]: - - testbedname: testbed33. + - testbednames: testbed33 and testbed34. - hostname: s19-t33t34-tg1. - IPMI IP: 10.30.50.46 - Host IP: 10.30.51.49 @@ -478,6 +505,10 @@ Note: Server19 (TG) is shared between testbed33 & testbed34 - s19-t33t34-tg1-c2/p4 - 10GE-port4 x710-4p10GE. - s19-t33t34-tg1-c4/p1 - 25GE-port1 xxv710-DA2-2p25GE. - s19-t33t34-tg1-c4/p2 - 25GE-port2 xxv710-DA2-2p25GE. + - s19-t33t34-tg1-c10/p1 - 10GE-port1 x710-4p10GE. + - s19-t33t34-tg1-c10/p2 - 10GE-port2 x710-4p10GE. + - s19-t33t34-tg1-c10/p3 - 10GE-port3 x710-4p10GE. + - s19-t33t34-tg1-c10/p4 - 10GE-port4 x710-4p10GE. - Server20 [Type-4]: - testbedname: testbed34. - hostname: s20-t34-sut1. @@ -691,18 +722,35 @@ Two 3-Node testbeds are constructed by connecting 6 Xeon servers using below spe - s16-t32-tg1-c10/p3 to s16-t32-tg1-c10/p4. ``` + +#### 1-Node Arm +One 1-Node testbed is constructed by connecting 1 Arm server using below specification: +``` +- testbed13: + - ring1 40GE-ports XL710-QDA2-2p40GE on SUTs: + - s27-t13-sut1-c1/p2 - s27-t13-sut1-c3/p1. + - ring2 40GE-ports XL710-QDA2-2p40GE on SUTs: + - s27-t13-sut1-c3/p2 - s27-t13-sut1-c6/p1. + - ring3 40GE-ports XL710-QDA2-2p40GE on SUTs: + - s27-t13-sut1-c6/p2 - s27-t13-sut1-c1/p1. +``` + + #### 3-Node Arm -One 3-Node testbed is constructed by connecting 3 Arm servers using below specification: +One 3-Node testbed is constructed by connecting 2 TaiShan servers and one Xeon server using below specification: ``` - testbed33: - ring1 10GE-ports 82599-2p10GE on SUTs: - - t33t34-tg1-c2/p1 - t33-sut1-ca/p1. - - t33-sut1-ca/p2 - t33-sut2-ca/p1. - - t33-sut2-ca/p2 - t33t34-tg1-c2/p2. + - t33t34-tg1-c2/p2 - t33-sut1-c6/p2. + - t33-sut1-c6/p1 - t33-sut2-c6/p2. + - t33-sut2-c6/p1 - t33t34-tg1-c2/p1. - ring2 25GE-ports cx4-2p25GE on SUTs: - - t33t34-tg1-c4/p1 - t33-sut1-c2/p1. - - t33-sut1-c2/p2 - t33-sut2-c2/p1. - - t33-sut2-c2/p2 - t33t34-tg1-c4/p2. + - t33t34-tg1-c4/p2 - t33-sut1-c4/p2. + - t33-sut1-c4/p1 - t33-sut2-c4/p2. + - t33-sut2-c4/p1 - t33t34-tg1-c4/p1. +``` +One 3-Node testbed is constructed by connecting 2 MACCHIATObin servers and one Xeon server using below specification: +``` - testbed34: - ring1 10GE-ports Marvell on SUTs: - t33t34-tg1-c2/p3 - t34-sut1-ca/p1. @@ -782,8 +830,8 @@ The new FD.io CSIT-CPL lab (is expected to contain|contains) following hardware - RAM Memory: 8* 16GB DDR4-2400MT/s - Disks: 1* 4TB SATA HDD - NICs configuration: - - PCIe Slot2 e9:00.xx: connectx4-2p25GE Mellanox. - - PCIe Slota 11:00.xx: 82599-2p10GE Intel. + - PCIe Slot4 e9:00.xx: connectx4-2p25GE Mellanox. + - PCIe Slot6 11:00.xx: 82599-2p10GE Intel. 4. Type-4: Purpose - (Arm Armada 8040 Processor) SUT for SW Data Plane Workload i.e. VPP, testpmd. - Quantity: 3 - Physical connectivity: @@ -868,7 +916,7 @@ The new FD.io CSIT-CPL lab (is expected to contain|contains) following hardware - PCIe Slot6 86:00.xx: empty. - PCIe Slot8 af:00.xx: empty. - PCIe Slot10 d8:00.xx: empty. -9. Type-9: Purpose - (Cavium ThunderX2 Processor) SUT for VPP_Device functional tests. +9. Type-9: Purpose - (Marvell ThunderX2 Processor) SUT for VPP_Device functional tests. - Quantity: 1 - Physical connectivity: - IPMI and host management ports. @@ -880,9 +928,11 @@ The new FD.io CSIT-CPL lab (is expected to contain|contains) following hardware - RAM Memory: 4* 32GB RDIMM - Disks: 1* 480GB SSD Micron, 1* 1000GB HDD Seagate_25 - NICs configuration: - - PCIe Slotx : XL710-QDA2. - - PCIe Sloty : XL710-QDA2. - - PCIe Slotz : XL710-QDA2. + - Numa0: + - PCIe Slot1 05:00.xx: XL710-QDA2. + - PCIe Slot3 08:00.xx: XL710-QDA2. + - Numa1: + - PCIe Slot6 85:00.xx: XL710-QDA2. 10. Type-10: Purpose - (Intel Atom C3000 Processor) SUT for SW Data Plane Workload i.e. VPP, testpmd. - Quantity: 4 - Physical connectivity: