X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=docs%2Freport%2Fvpp_performance_tests%2Fcsit_release_notes.rst;h=52d2690d266d099f8215ef8437ce2b4f5bd64a07;hb=4bc1e70ad02b198a7b9ea32b72da3ae98978e8c5;hp=74e3082f8ea7216099495c40a11bdef3f629ce67;hpb=ce1088d88744f2c040801c9852565d522b3feb68;p=csit.git
diff --git a/docs/report/vpp_performance_tests/csit_release_notes.rst b/docs/report/vpp_performance_tests/csit_release_notes.rst
index 74e3082f8e..52d2690d26 100644
--- a/docs/report/vpp_performance_tests/csit_release_notes.rst
+++ b/docs/report/vpp_performance_tests/csit_release_notes.rst
@@ -4,193 +4,123 @@ Release Notes
Changes in |csit-release|
-------------------------
-#. **VPP performance tests**
-
- - *MRR tests* - New Maximum Receive Rate tests measure the packet
- forwarding rate under the maximum load offered by traffic
- generator over a set trial duration, regardless of packet loss.
- MRR tests are used for continuous performance trending and for
- comparison between releases.
-
- - *Service Chaining with SRv6* - New SRv6 (Segment Routing IPv6) proxy
- tests measure performance of SRv6 Endpoint fronting SR-unaware
- appliance via masquerading (End.AM), dynamic proxy (End.AD) or
- static proxy (End.AS) SR functions.
+#. VPP PERFORMANCE TESTS
-#. **Presentation and Analytics Layer**
+ - CSIT test environment is versioned, see
+ :ref:`test_environment_versioning`.
- - *Performance trending* - Added continuous performance trending and
- analysis. New Performance Trending and Performance Analysis jobs
- executed regular throughput tests, with results being subsequently
- analysed and trend and anomalies summarized and presented in VPP
- Performance Dashboard and trendline graphs.
+ - To identify performance changes due to VPP code changes from
+ v20.05.0 to v20.09.0, both have been tested in CSIT environment
+ ver. 5 and compared against each other. All substantial
+ progressions has been marked up with RCA analysis. See
+ :ref:`vpp_compare_current_vs_previous_release` and
+ :ref:`vpp_known_issues`.
-#. **Test Framework Optimizations**
+ - **NAT44 tests**: Adapted existing and added new tests.
- - *Performance tests efficiency* - Qemu build/install optimizations,
- warmup phase handling, vpp restart handling. Resulted in improved
- stability and reduced total execution time by 30% for single pkt
- size e.g. 64B/78B.
+ - Refactored NAT44 deterministic mode (nat44det) tests to use separate
+ det44 vpp plugin and to use the same scheme of inside and outside
+ addresses and ports, as used in new NAT44 endpoint-dependent mode tests.
- - *General code housekeeping* - ongoing RF keywords optimizations,
- removal of redundant RF keywords.
+ - Added new NAT44 endpoint-depended mode uni-directional (nat44ed-udir)
+ tests that measure packet throughput in one direction with usage of TRex
+ in stateless mode.
-Performance Changes
--------------------
+ - Added new NAT44 endpoint-dependent mode CPS tests that measure
+ connections per second with usage of TRex in stateful mode.
+ UPD packet size is 64 bytes. Size of TCP control packets
+ is not configurable, please ignore the -64b- part of test names.
-Relative performance changes in measured packet throughput in |csit-release|
-are calculated against the results from |csit-release-1|
-report. Listed mean and standard deviation values are computed based on
-a series of the same tests executed against respective VPP releases to
-verify test results repeatability, with percentage change calculated for
-mean values. Note that the standard deviation is quite high for a small
-number of packet throughput tests, what indicates poor test results
-repeatability and makes the relative change of mean throughput value not
-fully representative for these tests. The root causes behind poor
-results repeatability vary between the test cases.
+ - Added new NAT44 endpoint-dependent mode PPS tests that measure
+ packets per second (control and data together) with usage of TRex
+ in stateful mode. UPD packet size is 64 bytes. Size of TCP
+ data packets is governed by the default MSS value, so most data packets
+ are 1460 bytes long, please ignore the -64b- part of test names.
-NDR Changes
-~~~~~~~~~~~
+ - See :ref:`nat44_methodology` for more details.
-NDR throughput changes between releases are available in a
-CSV and pretty ASCII formats:
+ - **IPSec async mode tests**: Added VPP performance tests for async crypto
+ engine.
- - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-ndr.csv>`_,
- - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-ndr.csv>`_,
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-ndr.txt>`_,
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-ndr.txt>`_.
+ - **AMD 2n-zn2 testbed**: New physical testbed type installed in
+ FD.io CSIT, with VPP and DPDK performance data added to CSIT
+ trending and this report.
-.. note::
+ - **AMD 2n-tx2 testbed**: New physical testbed type installed in
+ FD.io CSIT, with VPP and DPDK performance data added to CSIT
+ trending and this report.
- Test results have been generated by
- `FD.io test executor vpp performance job 3n-hsw`_,
- with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip
- `archived here <../_static/archive/>`_.
+#. TEST FRAMEWORK
-PDR Changes
-~~~~~~~~~~~
+ - **TRex ASTF**: Added capability to run TRex in advanced stateful mode.
-PDR throughput changes between releases are available in a
-CSV and pretty ASCII formats:
+ - **CSIT PAPI support**: Due to issues with PAPI performance, VAT is
+ still used in CSIT for all VPP scale tests. See known issues below.
- - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-pdr.csv>`_,
- - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-pdr.csv>`_,
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-pdr.txt>`_,
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-pdr.txt>`_.
+ - **General Code Housekeeping**: Ongoing RF keywords optimizations,
+ removal of redundant RF keywords and aligning of suite/test
+ setup/teardowns.
-.. note::
+ - **Intel E810CQ 100G NIC**: Added configuration for Intel E810CQ 100G NIC.
+ No tests run for this NIC as it is not present in FD.io CSIT lab yet.
- Test results have been generated by
- `FD.io test executor vpp performance job 3n-hsw`_,
- with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip
- `archived here <../_static/archive/>`_.
+#. PRESENTATION AND ANALYTICS LAYER
-MRR Changes
-~~~~~~~~~~~
+ - **Graphs improvements**: Added possibility to use Gbps on Y-axis in
+ Packet Throughput and Speedup Multi-Core graphs, added unidirectional
+ mode to the Latency graphs.
-MRR small packet throughput changes between releases are available in a
-CSV and pretty ASCII formats:
+.. raw:: latex
- - `csv format for 1t1c <../_static/vpp/performance-changes-1t1c-mrr.csv>`_,
- - `csv format for 2t2c <../_static/vpp/performance-changes-2t2c-mrr.csv>`_,
- - `csv format for 4t4c <../_static/vpp/performance-changes-4t4c-mrr.csv>`_,
- - `pretty ASCII format for 1t1c <../_static/vpp/performance-changes-1t1c-mrr.txt>`_,
- - `pretty ASCII format for 2t2c <../_static/vpp/performance-changes-2t2c-mrr.txt>`_,
- - `pretty ASCII format for 4t4c <../_static/vpp/performance-changes-4t4c-mrr.txt>`_.
+ \clearpage
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp mrr jobs `_
- with Robot Framework result files csit-vpp-perf-mrr-daily-master__*__output.xml.gz
- `archived here `_.
-
-Comparison Across Testbeds
---------------------------
-
-Relative performance changes in measured packet throughputon 3-Node Skx testbed
-are calculated against the results measured on 3-Node Hsw testbed.
-
-NDR Changes
-~~~~~~~~~~~
-
-NDR changes between testbeds are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for ndr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-ndr.csv>`_,
- - `pretty ASCII format for ndr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-ndr.txt>`_.
-
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp performance job 3n-hsw`_ and
- `FD.io test executor vpp performance job 3n-skx`_
- with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip
- `archived here <../_static/archive/>`_.
-
-PDR Changes
-~~~~~~~~~~~
-
-PDR throughput changes between testbeds are available in a
-CSV and pretty ASCII formats:
-
- - `csv format for pdr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-pdr.csv>`_,
- - `pretty ASCII format for pdr <../_static/vpp/performance-compare-testbeds-3n-hsw-3n-skx-pdr.txt>`_.
-
-.. note::
-
- Test results have been generated by
- `FD.io test executor vpp performance job 3n-hsw`_ and
- `FD.io test executor vpp performance job 3n-skx`_
- with Robot Framework result
- files csit-vpp-perf-|srelease|-\*.zip
- `archived here <../_static/archive/>`_.
-
-Throughput Trending
--------------------
-
-In addition to reporting throughput changes between VPP releases, CSIT
-provides continuous performance trending for VPP master branch:
-
-#. `VPP Performance Dashboard `_
- - per VPP test case throughput trend, trend compliance and summary of
- detected anomalies.
-
-#. `Trending Methodology `_
- - throughput test metrics, trend calculations and anomaly
- classification (progression, regression, outlier).
-
-#. `Trendline Graphs `_
- - per VPP build MRR throughput measurements against the trendline
- with anomaly highlights, with associated CSIT test jobs.
+.. _vpp_known_issues:
Known Issues
------------
List of known issues in |csit-release| for VPP performance tests:
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+
-| # | Issue | Jira ID | Description |
-+===+=================================================+============+=================================================================+
-| 1 | Sporadic (1 in 200) NDR discovery test failures | CSIT-570 | DPDK reporting rx-errors, indicating L1 issue. Suspected issue |
-| | on x520. | | with HW combination of X710-X520 in LF testbeds. Not observed |
-| | | | outside of LF testbeds. |
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+
-| 2 | Lower than expected NDR throughput of DPDK | CSIT-571 | Suspected NIC firmware or DPDK driver issue affecting NDR and |
-| | testpmd and VPP L2 path NDR throughput with | | PDR throughput on XL710 and X710 NICs. |
-| | xl710 and x710 NICs, compared to x520 NICs. | | |
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+
-| 3 | Tagged Ethernet dot1q and dot1ad L2 path | CSIT-1066 | Tagged Ethernet dot1q and dot1ad L2 path throughput regression: |
-| | throughput regression. | | NDR -2%..-5%, PDR -2%..-6%, MRR. Affects l2xc and l2bd |
-| | | | performance tests. |
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+
-| 4 | IPSec (software, no QAT HW) throughput | CSIT-1064 | IPSec throughput regression: NDR -3%..-8%, PDR -2%..-8%, MRR |
-| | regression. | | -3%..-7%. Affects IPSec SW tests, QAT HW tests not affected. |
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+
-| 5 | High failure rate of creating working container | CSIT-1065 | About 20% of orchestrated container topology tests failing data |
-| | topologies with K8s/Ligato orchestration. | | plane verification indicating configuration issue. Suspected |
-| | | | issue with Ligato vpp-agent. |
-+---+-------------------------------------------------+------------+-----------------------------------------------------------------+
++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
+| # | JiraID | Issue Description |
++====+=========================================+===========================================================================================================+
+| 1 | `CSIT-570 | Sporadic (1 in 200) NDR discovery test failures on x520. DPDK reporting rx-errors, indicating L1 issue. |
+| | `_ | Suspected issue with HW combination of X710-X520 in LF testbeds. Not observed outside of LF testbeds. |
++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
+| 2 | `VPP-662 | 9000B packets not supported by NICs VIC1227 and VIC1387. |
+| | `_ | |
++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
+| 3 | `CSIT-1763 | Adapt ramp-up phase of nat44 tests for different frame sizes. |
+| | `_ | Currently ramp-up phase rate and duration values are correctly set for tests with 64B frame size. |
++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
+| 4 | `CSIT-1671 | All CSIT scale tests can not use PAPI due to much slower performance compared to VAT/CLI (it takes much |
+| | `_ | longer to program VPP). This needs to be addressed on the PAPI side. |
+| +-----------------------------------------+ The usual PAPI library spends too much time parsing arguments, so even with async processing (hundreds of |
+| | `VPP-1763 | commands in flight over socket), the VPP configuration for large scale tests (millions of messages) takes |
+| | `_ | too long. |
++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
+| 5 | `CSIT-1771 | IPv4 IPSEC 9000B packet tests had been failing when chained buffers were not supported. |
+| | `_ | This has been fixed on VPP side, but CSIT still needs to re-enable jumbo tests. |
++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
+| 6 | `VPP-1934 | [i40e] Interfaces are not brought up from carrier-down. |
+| | `_ | In case of i40e -based interface (e.g Intel x700 series NIC) is bound to kernel driver (i40e) and is in |
+| | | state "no-carrier" () because previously it was disabled via |
+| | | "I40E_AQ_PHY_LINK_ENABLED" call, then VPP during initialization of AVF interface is not re-enabling |
+| | | interface link via i40e driver to up. |
+| | | CSIT implemented `workaround for AVF interface `_ until fixed. |
++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
+| 7 | `CSIT-1760 | All Mellanox / rdma driver tests are failing on LF testbed28 while successfully run on other LF testbeds. |
+| | `_ | |
++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
+
+Root Cause Analysis for Performance Changes
+-------------------------------------------
+
+List of RCAs in |csit-release| for VPP performance changes:
+
++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+
+| # | JiraID | Issue Description |
++====+=========================================+===========================================================================================================+
+| 1 | | |
+| | | |
++----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+