X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=docs%2Freport%2Fvpp_performance_tests%2Fpacket_throughput_graphs%2Fipsec.rst;h=3f15a2143eecbf0c3b3bb12765806fe1dc4ad246;hb=refs%2Fchanges%2F06%2F14006%2F5;hp=9f9fc8b4f0c75ecc724e3003836f033c6d10a5cd;hpb=d9a08e59581aafe44d446b5bc1ce6ff86b2b173b;p=csit.git diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst index 9f9fc8b4f0..3f15a2143e 100644 --- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst +++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst @@ -1,5 +1,10 @@ -IPSec Crypto HW: IP4 Routed-Forwarding -====================================== + +.. raw:: latex + + \clearpage + +IPSec IPv4 Routing +================== Following sections include summary graphs of VPP Phy-to-Phy performance with IPSec encryption used in combination with IPv4 routed-forwarding, @@ -10,121 +15,114 @@ Performance is reported for VPP running in multiple configurations of VPP worker thread(s), a.k.a. VPP data plane thread(s), and their physical CPU core(s) placement. -Note: only 1,000 scale IPSec tunnel test cases are plotted. Single IPSec -tunnel test cases are listed in regex outputs, but marked {NOT PLOTTED} -due to the current limitation of auto-plotting scripts. For all test -result data please refere to **Detailed Test Results** section. +CSIT source code for the test cases used for plots can be found in +`CSIT git repository `_. -NDR Throughput -~~~~~~~~~~~~~~ +3n-hsw-xl710 +~~~~~~~~~~~~ -VPP NDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented -in the graph below. +64b-1t1c-base_and_scale +----------------------- .. raw:: html - - -*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPSEC HW.* +
-CSIT source code for the test cases used for above plots can be found in CSIT -git repository: +:index:`Throughput: ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr` -.. code-block:: bash +.. raw:: html - $ cd $CSIT/tests/vpp/perf/crypto - $ grep -E "64B-1t1c-.*ipsec.*-ndrdisc" * + + +



+
- 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrdisc - 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrdisc - 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrdisc - 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrdisc - 40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc +.. raw:: latex -VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented -in the graph below. + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr} + \label{fig:ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr} + \end{figure} .. raw:: html - +
-*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPSEC HW.* +.. raw:: latex -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: + \clearpage -.. code-block:: bash +:index:`Throughput: ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-pdr` - $ cd $CSIT/tests/vpp/perf/crypto - $ grep -E "64B-2t2c-.*ipsec.*-ndrdisc" * +.. raw:: html - 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot:| tc07-64B-2t2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrdisc - 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot:| tc07-64B-2t2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrdisc - 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot:| tc07-64B-2t2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrdisc - 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot:| tc07-64B-2t2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot:| tc07-64B-2t2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot:| tc07-64B-2t2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot:| tc07-64B-2t2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot:| tc07-64B-2t2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrdisc - 40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot:| tc07-64B-2t2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc + + +



+
-PDR Throughput -~~~~~~~~~~~~~~ +.. raw:: latex -VPP PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented -in the graph below. PDR measured for 0.5% packet loss ratio. + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-pdr} + \label{fig:ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-pdr} + \end{figure} -.. raw:: html +.. raw:: latex - + \clearpage -*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPSEC HW.* +64b-2t2c-base_and_scale +----------------------- -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: +.. raw:: html + +
-.. code-block:: bash +:index:`Throughput: ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr` + +.. raw:: html - $ cd $CSIT/tests/vpp/perf/crypto - $ grep -E "64B-1t1c-.*ipsec.*-pdrdisc" * + + +



+
- 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-pdrdisc - 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-pdrdisc - 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-pdrdisc - 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-pdrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-pdrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-pdrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-pdrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-pdrdisc - 40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc +.. raw:: latex -VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented -in the graph below. PDR measured for 0.5% packet loss ratio. + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr} + \label{fig:ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr} + \end{figure} .. raw:: html - +
-*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPSEC HW.* +.. raw:: latex -CSIT source code for the test cases used for above plots can be found in CSIT -git repository: + \clearpage + +:index:`Throughput: ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-pdr` + +.. raw:: html -.. code-block:: bash + + +



+
- $ cd $CSIT/tests/vpp/perf/crypto - $ grep -E "64B-2t2c-.*ipsec.*-pdrdisc" * +.. raw:: latex - 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-aes-gcm-ndrpdrdisc.robot:| tc08-64B-2t2c-ethip4ipsecbasetnl-ip4base-int-aes-gcm-pdrdisc - 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot:| tc08-64B-2t2c-ethip4ipsecbasetnl-ip4base-int-cbc-sha1-pdrdisc - 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot:| tc08-64B-2t2c-ethip4ipsecbasetnl-ip4base-tnl-aes-gcm-pdrdisc - 40ge2p1xl710-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot:| tc08-64B-2t2c-ethip4ipsecbasetnl-ip4base-tnl-cbc-sha1-pdrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-ndrpdrdisc.robot:| tc08-64B-2t2c-ethip4ipsecscale1000tnl-ip4base-int-aes-gcm-pdrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-ndrpdrdisc.robot:| tc08-64B-2t2c-ethip4ipsecscale1000tnl-ip4base-int-cbc-sha1-pdrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-ndrpdrdisc.robot:| tc08-64B-2t2c-ethip4ipsecscale1000tnl-ip4base-tnl-aes-gcm-pdrdisc - 40ge2p1xl710-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-ndrpdrdisc.robot:| tc08-64B-2t2c-ethip4ipsecscale1000tnl-ip4base-tnl-cbc-sha1-pdrdisc - 40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot:| tc08-64B-2t2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc + \begin{figure}[H] + \centering + \graphicspath{{../_build/_static/vpp/}} + \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-pdr} + \label{fig:ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-pdr} + \end{figure}