X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=docs%2Freport%2Fvpp_performance_tests%2Fpacket_throughput_graphs%2Fipsec.rst;h=a84773ac5924527fa0283f6a2159237362fa0b96;hb=43480e631defcb2fa40cc35e48ee40ce31b1dd68;hp=1a519ecbe6a36e8f4ea4372a3dcb81756538fd3f;hpb=785519e26196b9e0a5016d0fc54ed099fd0a920f;p=csit.git

diff --git a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
index 1a519ecbe6..a84773ac59 100644
--- a/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
+++ b/docs/report/vpp_performance_tests/packet_throughput_graphs/ipsec.rst
@@ -1,5 +1,5 @@
-IPSec Crypto HW: IP4 Routed-Forwarding
-======================================
+IPSec IPv4 Routing
+==================
 
 Following sections include summary graphs of VPP Phy-to-Phy performance with
 IPSec encryption used in combination with IPv4 routed-forwarding,
@@ -10,124 +10,102 @@ Performance is reported for VPP running in multiple configurations of
 VPP worker thread(s), a.k.a. VPP data plane thread(s), and their
 physical CPU core(s) placement.
 
-Note: only 1,000 scale IPSec tunnel test cases are plotted. Single IPSec
-tunnel test cases are listed in regex outputs, but marked {NOT PLOTTED}
-due to the current limitation of auto-plotting scripts. For all test
-result data please refere to **Detailed Test Results** section.
+CSIT source code for the test cases used for plots can be found in
+`CSIT git repository <https://git.fd.io/csit/tree/tests/vpp/perf/crypto?h=rls1807>`_.
 
-NDR Throughput
-~~~~~~~~~~~~~~
+3n-hsw-xl710
+~~~~~~~~~~~~
 
-VPP NDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
-in the graph below.
+64b-1t1c-base_and_scale
+-----------------------
 
 .. raw:: html
 
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ipsechw-ndrdisc.html"></iframe>
+    <center><b>
 
-*Figure 1. VPP 1thread 1core - NDR Throughput for Phy-to-Phy IPSEC HW.*
+:index:`Throughput: ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr`
 
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. code-block:: bash
-
-    $ cd $CSIT/tests/vpp/perf/crypto
-    $ grep -E "64B-1t1c-.*ipsec.*-ndrdisc" *
+.. raw:: html
 
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-aes-gcm-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4ipsecscale1ip4-ip4base-interfaces-aes-gcm-ndrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-aes-gcm-ndrpdrdisc.robot:| tc03-64B-1t1c-ethip4ipsecscale1000ip4-ip4base-interfaces-aes-gcm-ndrdisc
-    {NOT PLOTTED} 40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-cbc-sha1-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4ipsecscale1ip4-ip4base-interfaces-cbc-sha1-ndrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-cbc-sha1-ndrpdrdisc.robot:| tc03-64B-1t1c-ethip4ipsecscale1000ip4-ip4base-interfaces-cbc-sha1-ndrdisc
-    {NOT PLOTTED} 40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-aes-gcm-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4ipsecscale1ip4-ip4base-tunnels-aes-gcm-ndrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-aes-gcm-ndrpdrdisc.robot:| tc03-64B-1t1c-ethip4ipsecscale1000ip4-ip4base-tunnels-aes-gcm-ndrdisc
-    {NOT PLOTTED} 40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-cbc-sha1-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4ipsecscale1ip4-ip4base-tunnels-cbc-sha1-ndrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-cbc-sha1-ndrpdrdisc.robot:| tc03-64B-1t1c-ethip4ipsecscale1000ip4-ip4base-tunnels-cbc-sha1-ndrdisc
-    40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot:| tc01-64B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
+    </b>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr.html"></iframe>
+    <p><br><br></p>
+    </center>
 
+.. raw:: latex
 
-VPP NDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
-in the graph below.
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr}
+            \label{fig:ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-ndr}
+    \end{figure}
 
 .. raw:: html
 
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ipsechw-ndrdisc.html"></iframe>
+    <center><b>
 
-*Figure 2. VPP 2threads 2cores - NDR Throughput for Phy-to-Phy IPSEC HW.*
+:index:`Throughput: ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-pdr`
 
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. code-block:: bash
+.. raw:: html
 
-    $ cd $CSIT/tests/vpp/perf/crypto
-    $ grep -E "64B-2t2c-.*ipsec.*-ndrdisc" *
+    </b>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-pdr.html"></iframe>
+    <p><br><br></p>
+    </center>
 
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-aes-gcm-ndrpdrdisc.robot:| tc13-64B-2t2c-ethip4ipsecscale1ip4-ip4base-interfaces-aes-gcm-ndrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-aes-gcm-ndrpdrdisc.robot:| tc15-64B-2t2c-ethip4ipsecscale1000ip4-ip4base-interfaces-aes-gcm-ndrdisc
-    {NOT PLOTTED} 40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-cbc-sha1-ndrpdrdisc.robot:| tc13-64B-2t2c-ethip4ipsecscale1ip4-ip4base-interfaces-cbc-sha1-ndrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-cbc-sha1-ndrpdrdisc.robot:| tc15-64B-2t2c-ethip4ipsecscale1000ip4-ip4base-interfaces-cbc-sha1-ndrdisc
-    {NOT PLOTTED} 40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-aes-gcm-ndrpdrdisc.robot:| tc13-64B-2t2c-ethip4ipsecscale1ip4-ip4base-tunnels-aes-gcm-ndrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-aes-gcm-ndrpdrdisc.robot:| tc15-64B-2t2c-ethip4ipsecscale1000ip4-ip4base-tunnels-aes-gcm-ndrdisc
-    {NOT PLOTTED} 40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-cbc-sha1-ndrpdrdisc.robot:| tc13-64B-2t2c-ethip4ipsecscale1ip4-ip4base-tunnels-cbc-sha1-ndrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-cbc-sha1-ndrpdrdisc.robot:| tc15-64B-2t2c-ethip4ipsecscale1000ip4-ip4base-tunnels-cbc-sha1-ndrdisc
-    40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot:| tc07-64B-2t2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrdisc
+.. raw:: latex
 
-PDR Throughput
-~~~~~~~~~~~~~~
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-pdr}
+            \label{fig:ipsec-3n-hsw-xl710-64b-1t1c-base_and_scale-pdr}
+    \end{figure}
 
-VPP PDR 64B packet throughput in 1t1c setup (1thread, 1core) is presented
-in the graph below. PDR measured for 0.5% packet loss ratio.
+64b-2t2c-base_and_scale
+-----------------------
 
 .. raw:: html
 
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-1t1c-ipsechw-pdrdisc.html"></iframe>
+    <center><b>
 
-*Figure 3. VPP 1thread 1core - PDR Throughput for Phy-to-Phy IPSEC HW.*
+:index:`Throughput: ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr`
 
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. code-block:: bash
-
-    $ cd $CSIT/tests/vpp/perf/crypto
-    $ grep -E "64B-1t1c-.*ipsec.*-pdrdisc" *
+.. raw:: html
 
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-aes-gcm-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4ipsecscale1ip4-ip4base-interfaces-aes-gcm-pdrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-aes-gcm-ndrpdrdisc.robot:| tc04-64B-1t1c-ethip4ipsecscale1000ip4-ip4base-interfaces-aes-gcm-pdrdisc
-    {NOT PLOTTED} 40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-cbc-sha1-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4ipsecscale1ip4-ip4base-interfaces-cbc-sha1-pdrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-cbc-sha1-ndrpdrdisc.robot:| tc04-64B-1t1c-ethip4ipsecscale1000ip4-ip4base-interfaces-cbc-sha1-pdrdisc
-    {NOT PLOTTED} 40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-aes-gcm-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4ipsecscale1ip4-ip4base-tunnels-aes-gcm-pdrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-aes-gcm-ndrpdrdisc.robot:| tc04-64B-1t1c-ethip4ipsecscale1000ip4-ip4base-tunnels-aes-gcm-pdrdisc
-    {NOT PLOTTED} 40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-cbc-sha1-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4ipsecscale1ip4-ip4base-tunnels-cbc-sha1-pdrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-cbc-sha1-ndrpdrdisc.robot:| tc04-64B-1t1c-ethip4ipsecscale1000ip4-ip4base-tunnels-cbc-sha1-pdrdisc
-    40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot:| tc02-64B-1t1c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
+    </b>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr.html"></iframe>
+    <p><br><br></p>
+    </center>
 
+.. raw:: latex
 
-VPP PDR 64B packet throughput in 2t2c setup (2thread, 2core) is presented
-in the graph below. PDR measured for 0.5% packet loss ratio.
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr}
+            \label{fig:ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-ndr}
+    \end{figure}
 
 .. raw:: html
 
-    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/64B-2t2c-ipsechw-pdrdisc.html"></iframe>
+    <center><b>
 
-*Figure 4. VPP 2thread 2core - PDR Throughput for Phy-to-Phy IPSEC HW.*
+:index:`Throughput: ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-pdr`
 
-CSIT source code for the test cases used for above plots can be found in CSIT
-git repository:
-
-.. code-block:: bash
+.. raw:: html
 
-    $ cd $CSIT/tests/vpp/perf/crypto
-    $ grep -E "64B-2t2c-.*ipsec.*-pdrdisc" *
+    </b>
+    <iframe width="700" height="1000" frameborder="0" scrolling="no" src="../../_static/vpp/ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-pdr.html"></iframe>
+    <p><br><br></p>
+    </center>
 
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-aes-gcm-ndrpdrdisc.robot:| tc14-64B-2t2c-ethip4ipsecscale1ip4-ip4base-interfaces-aes-gcm-pdrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-aes-gcm-ndrpdrdisc.robot:| tc16-64B-2t2c-ethip4ipsecscale1000ip4-ip4base-interfaces-aes-gcm-pdrdisc
-    {NOT PLOTTED} 40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-cbc-sha1-ndrpdrdisc.robot:| tc14-64B-2t2c-ethip4ipsecscale1ip4-ip4base-interfaces-cbc-sha1-pdrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-interfaces-cbc-sha1-ndrpdrdisc.robot:| tc16-64B-2t2c-ethip4ipsecscale1000ip4-ip4base-interfaces-cbc-sha1-pdrdisc
-    {NOT PLOTTED} 40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-aes-gcm-ndrpdrdisc.robot:| tc14-64B-2t2c-ethip4ipsecscale1ip4-ip4base-tunnels-aes-gcm-pdrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-aes-gcm-ndrpdrdisc.robot:| tc16-64B-2t2c-ethip4ipsecscale1000ip4-ip4base-tunnels-aes-gcm-pdrdisc
-    {NOT PLOTTED} 40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-cbc-sha1-ndrpdrdisc.robot:| tc14-64B-2t2c-ethip4ipsecscale1ip4-ip4base-tunnels-cbc-sha1-pdrdisc
-    40ge2p1xl710-ethip4ipsecscaleip4-ip4base-tunnels-cbc-sha1-ndrpdrdisc.robot:| tc16-64B-2t2c-ethip4ipsecscale1000ip4-ip4base-tunnels-cbc-sha1-pdrdisc
-    40ge2p1xl710-ethip4ipsectptlispgpe-ip4base-cbc-sha1-ndrpdrdisc.robot:| tc08-64B-2t2c-ethip4ipsectptlispgpe-ip4base-cbc-sha1-pdrdisc
+.. raw:: latex
 
+    \begin{figure}[H]
+        \centering
+            \graphicspath{{../_build/_static/vpp/}}
+            \includegraphics[clip, trim=0cm 8cm 5cm 0cm, width=0.70\textwidth]{ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-pdr}
+            \label{fig:ipsec-3n-hsw-xl710-64b-2t2c-base_and_scale-pdr}
+    \end{figure}