X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=drivers%2Fnet%2Fcxgbe%2Fbase%2Ft4_hw.c;h=701e0b1fe59376aa76cebacd1ecd733a58304f3a;hb=8d01b9cd70a67cdafd5b965a70420c3bd7fb3f82;hp=a8ccea0084516999b9dba0d6d43f8731e4692a45;hpb=f239aed5e674965691846e8ce3f187dd47523689;p=deb_dpdk.git diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c index a8ccea00..701e0b1f 100644 --- a/drivers/net/cxgbe/base/t4_hw.c +++ b/drivers/net/cxgbe/base/t4_hw.c @@ -1,34 +1,6 @@ -/*- - * BSD LICENSE - * - * Copyright(c) 2014-2017 Chelsio Communications. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Chelsio Communications nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2014-2018 Chelsio Communications. + * All rights reserved. */ #include @@ -40,12 +12,11 @@ #include #include #include -#include #include #include #include #include -#include +#include #include #include #include @@ -56,9 +27,6 @@ #include "t4_regs_values.h" #include "t4fw_interface.h" -static void init_link_config(struct link_config *lc, unsigned int pcaps, - unsigned int acaps); - /** * t4_read_mtu_tbl - returns the values in the HW path MTU table * @adap: the adapter @@ -403,6 +371,7 @@ int t4_wr_mbox_meat_timeout(struct adapter *adap, int mbox, t4_os_atomic_list_del(&entry, &adap->mbox_list, &adap->mbox_lock); t4_report_fw_error(adap); + free(temp); return (pcie_fw & F_PCIE_FW_ERR) ? -ENXIO : -EBUSY; } @@ -446,6 +415,7 @@ int t4_wr_mbox_meat_timeout(struct adapter *adap, int mbox, &adap->mbox_list, &adap->mbox_lock)); t4_report_fw_error(adap); + free(temp); return (v == X_MBOWNER_FW ? -EBUSY : -ETIMEDOUT); } @@ -546,6 +516,7 @@ int t4_wr_mbox_meat_timeout(struct adapter *adap, int mbox, T4_OS_MBOX_LOCKING( t4_os_atomic_list_del(&entry, &adap->mbox_list, &adap->mbox_lock)); + free(temp); return -G_FW_CMD_RETVAL((int)res); } } @@ -2164,6 +2135,91 @@ int t4_seeprom_wp(struct adapter *adapter, int enable) return t4_seeprom_write(adapter, EEPROM_STAT_ADDR, enable ? 0xc : 0); } +/** + * t4_fw_tp_pio_rw - Access TP PIO through LDST + * @adap: the adapter + * @vals: where the indirect register values are stored/written + * @nregs: how many indirect registers to read/write + * @start_idx: index of first indirect register to read/write + * @rw: Read (1) or Write (0) + * + * Access TP PIO registers through LDST + */ +void t4_fw_tp_pio_rw(struct adapter *adap, u32 *vals, unsigned int nregs, + unsigned int start_index, unsigned int rw) +{ + int cmd = FW_LDST_ADDRSPC_TP_PIO; + struct fw_ldst_cmd c; + unsigned int i; + int ret; + + for (i = 0 ; i < nregs; i++) { + memset(&c, 0, sizeof(c)); + c.op_to_addrspace = cpu_to_be32(V_FW_CMD_OP(FW_LDST_CMD) | + F_FW_CMD_REQUEST | + (rw ? F_FW_CMD_READ : + F_FW_CMD_WRITE) | + V_FW_LDST_CMD_ADDRSPACE(cmd)); + c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c)); + + c.u.addrval.addr = cpu_to_be32(start_index + i); + c.u.addrval.val = rw ? 0 : cpu_to_be32(vals[i]); + ret = t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), &c); + if (ret == 0) { + if (rw) + vals[i] = be32_to_cpu(c.u.addrval.val); + } + } +} + +/** + * t4_read_rss_key - read the global RSS key + * @adap: the adapter + * @key: 10-entry array holding the 320-bit RSS key + * + * Reads the global 320-bit RSS key. + */ +void t4_read_rss_key(struct adapter *adap, u32 *key) +{ + t4_fw_tp_pio_rw(adap, key, 10, A_TP_RSS_SECRET_KEY0, 1); +} + +/** + * t4_write_rss_key - program one of the RSS keys + * @adap: the adapter + * @key: 10-entry array holding the 320-bit RSS key + * @idx: which RSS key to write + * + * Writes one of the RSS keys with the given 320-bit value. If @idx is + * 0..15 the corresponding entry in the RSS key table is written, + * otherwise the global RSS key is written. + */ +void t4_write_rss_key(struct adapter *adap, u32 *key, int idx) +{ + u32 vrt = t4_read_reg(adap, A_TP_RSS_CONFIG_VRT); + u8 rss_key_addr_cnt = 16; + + /* T6 and later: for KeyMode 3 (per-vf and per-vf scramble), + * allows access to key addresses 16-63 by using KeyWrAddrX + * as index[5:4](upper 2) into key table + */ + if ((CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) && + (vrt & F_KEYEXTEND) && (G_KEYMODE(vrt) == 3)) + rss_key_addr_cnt = 32; + + t4_fw_tp_pio_rw(adap, key, 10, A_TP_RSS_SECRET_KEY0, 0); + + if (idx >= 0 && idx < rss_key_addr_cnt) { + if (rss_key_addr_cnt > 16) + t4_write_reg(adap, A_TP_RSS_CONFIG_VRT, + V_KEYWRADDRX(idx >> 4) | + V_T6_VFWRADDR(idx) | F_KEYWREN); + else + t4_write_reg(adap, A_TP_RSS_CONFIG_VRT, + V_KEYWRADDR(idx) | F_KEYWREN); + } +} + /** * t4_config_rss_range - configure a portion of the RSS mapping table * @adapter: the adapter @@ -2255,7 +2311,11 @@ int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid, * Send this portion of the RRS table update to the firmware; * bail out on any errors. */ - ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd), NULL); + if (is_pf4(adapter)) + ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd), + NULL); + else + ret = t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL); if (ret) return ret; } @@ -2285,7 +2345,44 @@ int t4_config_vi_rss(struct adapter *adapter, int mbox, unsigned int viid, c.retval_len16 = cpu_to_be32(FW_LEN16(c)); c.u.basicvirtual.defaultq_to_udpen = cpu_to_be32(flags | V_FW_RSS_VI_CONFIG_CMD_DEFAULTQ(defq)); - return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL); + if (is_pf4(adapter)) + return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL); + else + return t4vf_wr_mbox(adapter, &c, sizeof(c), NULL); +} + +/** + * t4_read_config_vi_rss - read the configured per VI RSS settings + * @adapter: the adapter + * @mbox: mbox to use for the FW command + * @viid: the VI id + * @flags: where to place the configured flags + * @defq: where to place the id of the default RSS queue for the VI. + * + * Read configured VI-specific RSS properties. + */ +int t4_read_config_vi_rss(struct adapter *adapter, int mbox, unsigned int viid, + u64 *flags, unsigned int *defq) +{ + struct fw_rss_vi_config_cmd c; + unsigned int result; + int ret; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_READ | + V_FW_RSS_VI_CONFIG_CMD_VIID(viid)); + c.retval_len16 = cpu_to_be32(FW_LEN16(c)); + ret = t4_wr_mbox(adapter, mbox, &c, sizeof(c), &c); + if (!ret) { + result = be32_to_cpu(c.u.basicvirtual.defaultq_to_udpen); + if (defq) + *defq = G_FW_RSS_VI_CONFIG_CMD_DEFAULTQ(result); + if (flags) + *flags = result & M_FW_RSS_VI_CONFIG_CMD_DEFAULTQ; + } + + return ret; } /** @@ -2383,6 +2480,46 @@ int t4_get_core_clock(struct adapter *adapter, struct vpd_params *p) return 0; } +/** + * t4_get_pfres - retrieve VF resource limits + * @adapter: the adapter + * + * Retrieves configured resource limits and capabilities for a physical + * function. The results are stored in @adapter->pfres. + */ +int t4_get_pfres(struct adapter *adapter) +{ + struct pf_resources *pfres = &adapter->params.pfres; + struct fw_pfvf_cmd cmd, rpl; + u32 word; + int v; + + /* + * Execute PFVF Read command to get VF resource limits; bail out early + * with error on command failure. + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PFVF_CMD) | + F_FW_CMD_REQUEST | + F_FW_CMD_READ | + V_FW_PFVF_CMD_PFN(adapter->pf) | + V_FW_PFVF_CMD_VFN(0)); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + v = t4_wr_mbox(adapter, adapter->mbox, &cmd, sizeof(cmd), &rpl); + if (v != FW_SUCCESS) + return v; + + /* + * Extract PF resource limits and return success. + */ + word = be32_to_cpu(rpl.niqflint_niq); + pfres->niqflint = G_FW_PFVF_CMD_NIQFLINT(word); + + word = be32_to_cpu(rpl.type_to_neq); + pfres->neq = G_FW_PFVF_CMD_NEQ(word); + return 0; +} + /* serial flash and firmware constants and flash config file constants */ enum { SF_ATTEMPTS = 10, /* max retries for SF operations */ @@ -2668,14 +2805,142 @@ void t4_dump_version_info(struct adapter *adapter) G_FW_HDR_FW_VER_BUILD(adapter->params.er_vers)); } -#define ADVERT_MASK (V_FW_PORT_CAP_SPEED(M_FW_PORT_CAP_SPEED) | \ - FW_PORT_CAP_ANEG) +#define ADVERT_MASK (V_FW_PORT_CAP32_SPEED(M_FW_PORT_CAP32_SPEED) | \ + FW_PORT_CAP32_ANEG) +/** + * fwcaps16_to_caps32 - convert 16-bit Port Capabilities to 32-bits + * @caps16: a 16-bit Port Capabilities value + * + * Returns the equivalent 32-bit Port Capabilities value. + */ +fw_port_cap32_t fwcaps16_to_caps32(fw_port_cap16_t caps16) +{ + fw_port_cap32_t caps32 = 0; + +#define CAP16_TO_CAP32(__cap) \ + do { \ + if (caps16 & FW_PORT_CAP_##__cap) \ + caps32 |= FW_PORT_CAP32_##__cap; \ + } while (0) + + CAP16_TO_CAP32(SPEED_100M); + CAP16_TO_CAP32(SPEED_1G); + CAP16_TO_CAP32(SPEED_25G); + CAP16_TO_CAP32(SPEED_10G); + CAP16_TO_CAP32(SPEED_40G); + CAP16_TO_CAP32(SPEED_100G); + CAP16_TO_CAP32(FC_RX); + CAP16_TO_CAP32(FC_TX); + CAP16_TO_CAP32(ANEG); + CAP16_TO_CAP32(MDIX); + CAP16_TO_CAP32(MDIAUTO); + CAP16_TO_CAP32(FEC_RS); + CAP16_TO_CAP32(FEC_BASER_RS); + CAP16_TO_CAP32(802_3_PAUSE); + CAP16_TO_CAP32(802_3_ASM_DIR); + +#undef CAP16_TO_CAP32 + + return caps32; +} + +/** + * fwcaps32_to_caps16 - convert 32-bit Port Capabilities to 16-bits + * @caps32: a 32-bit Port Capabilities value + * + * Returns the equivalent 16-bit Port Capabilities value. Note that + * not all 32-bit Port Capabilities can be represented in the 16-bit + * Port Capabilities and some fields/values may not make it. + */ +static fw_port_cap16_t fwcaps32_to_caps16(fw_port_cap32_t caps32) +{ + fw_port_cap16_t caps16 = 0; + +#define CAP32_TO_CAP16(__cap) \ + do { \ + if (caps32 & FW_PORT_CAP32_##__cap) \ + caps16 |= FW_PORT_CAP_##__cap; \ + } while (0) + + CAP32_TO_CAP16(SPEED_100M); + CAP32_TO_CAP16(SPEED_1G); + CAP32_TO_CAP16(SPEED_10G); + CAP32_TO_CAP16(SPEED_25G); + CAP32_TO_CAP16(SPEED_40G); + CAP32_TO_CAP16(SPEED_100G); + CAP32_TO_CAP16(FC_RX); + CAP32_TO_CAP16(FC_TX); + CAP32_TO_CAP16(802_3_PAUSE); + CAP32_TO_CAP16(802_3_ASM_DIR); + CAP32_TO_CAP16(ANEG); + CAP32_TO_CAP16(MDIX); + CAP32_TO_CAP16(MDIAUTO); + CAP32_TO_CAP16(FEC_RS); + CAP32_TO_CAP16(FEC_BASER_RS); + +#undef CAP32_TO_CAP16 + + return caps16; +} + +/* Translate Firmware Pause specification to Common Code */ +static inline enum cc_pause fwcap_to_cc_pause(fw_port_cap32_t fw_pause) +{ + enum cc_pause cc_pause = 0; + + if (fw_pause & FW_PORT_CAP32_FC_RX) + cc_pause |= PAUSE_RX; + if (fw_pause & FW_PORT_CAP32_FC_TX) + cc_pause |= PAUSE_TX; + + return cc_pause; +} + +/* Translate Common Code Pause Frame specification into Firmware */ +static inline fw_port_cap32_t cc_to_fwcap_pause(enum cc_pause cc_pause) +{ + fw_port_cap32_t fw_pause = 0; + + if (cc_pause & PAUSE_RX) + fw_pause |= FW_PORT_CAP32_FC_RX; + if (cc_pause & PAUSE_TX) + fw_pause |= FW_PORT_CAP32_FC_TX; + + return fw_pause; +} + +/* Translate Firmware Forward Error Correction specification to Common Code */ +static inline enum cc_fec fwcap_to_cc_fec(fw_port_cap32_t fw_fec) +{ + enum cc_fec cc_fec = 0; + + if (fw_fec & FW_PORT_CAP32_FEC_RS) + cc_fec |= FEC_RS; + if (fw_fec & FW_PORT_CAP32_FEC_BASER_RS) + cc_fec |= FEC_BASER_RS; + + return cc_fec; +} + +/* Translate Common Code Forward Error Correction specification to Firmware */ +static inline fw_port_cap32_t cc_to_fwcap_fec(enum cc_fec cc_fec) +{ + fw_port_cap32_t fw_fec = 0; + + if (cc_fec & FEC_RS) + fw_fec |= FW_PORT_CAP32_FEC_RS; + if (cc_fec & FEC_BASER_RS) + fw_fec |= FW_PORT_CAP32_FEC_BASER_RS; + + return fw_fec; +} /** * t4_link_l1cfg - apply link configuration to MAC/PHY - * @phy: the PHY to setup - * @mac: the MAC to setup - * @lc: the requested link configuration + * @adapter: the adapter + * @mbox: the Firmware Mailbox to use + * @port: the Port ID + * @lc: the Port's Link Configuration * * Set up a port's MAC and PHY according to a desired link configuration. * - If the PHY can auto-negotiate first decide what to advertise, then @@ -2687,48 +2952,60 @@ void t4_dump_version_info(struct adapter *adapter) int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port, struct link_config *lc) { - struct fw_port_cmd c; - unsigned int mdi = V_FW_PORT_CAP_MDI(FW_PORT_CAP_MDI_AUTO); - unsigned int fc, fec; + unsigned int fw_mdi = V_FW_PORT_CAP32_MDI(FW_PORT_CAP32_MDI_AUTO); + unsigned int fw_caps = adap->params.fw_caps_support; + fw_port_cap32_t fw_fc, cc_fec, fw_fec, rcap; + struct fw_port_cmd cmd; lc->link_ok = 0; - fc = 0; - if (lc->requested_fc & PAUSE_RX) - fc |= FW_PORT_CAP_FC_RX; - if (lc->requested_fc & PAUSE_TX) - fc |= FW_PORT_CAP_FC_TX; - - fec = 0; - if (lc->requested_fec & FEC_RS) - fec |= FW_PORT_CAP_FEC_RS; - if (lc->requested_fec & FEC_BASER_RS) - fec |= FW_PORT_CAP_FEC_BASER_RS; - if (lc->requested_fec & FEC_RESERVED) - fec |= FW_PORT_CAP_FEC_RESERVED; - memset(&c, 0, sizeof(c)); - c.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) | - F_FW_CMD_REQUEST | F_FW_CMD_EXEC | - V_FW_PORT_CMD_PORTID(port)); - c.action_to_len16 = - cpu_to_be32(V_FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) | - FW_LEN16(c)); - - if (!(lc->supported & FW_PORT_CAP_ANEG)) { - c.u.l1cfg.rcap = cpu_to_be32((lc->supported & ADVERT_MASK) | - fc | fec); + fw_fc = cc_to_fwcap_pause(lc->requested_fc); + + /* Convert Common Code Forward Error Control settings into the + * Firmware's API. If the current Requested FEC has "Automatic" + * (IEEE 802.3) specified, then we use whatever the Firmware + * sent us as part of it's IEEE 802.3-based interpratation of + * the Transceiver Module EPROM FEC parameters. Otherwise we + * use whatever is in the current Requested FEC settings. + */ + if (lc->requested_fec & FEC_AUTO) + cc_fec = lc->auto_fec; + else + cc_fec = lc->requested_fec; + fw_fec = cc_to_fwcap_fec(cc_fec); + + /* Figure out what our Requested Port Capabilities are going to be. + */ + if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) { + rcap = (lc->pcaps & ADVERT_MASK) | fw_fc | fw_fec; lc->fc = lc->requested_fc & ~PAUSE_AUTONEG; - lc->fec = lc->requested_fec; + lc->fec = cc_fec; } else if (lc->autoneg == AUTONEG_DISABLE) { - c.u.l1cfg.rcap = cpu_to_be32(lc->requested_speed | fc | - fec | mdi); + rcap = lc->requested_speed | fw_fc | fw_fec | fw_mdi; lc->fc = lc->requested_fc & ~PAUSE_AUTONEG; - lc->fec = lc->requested_fec; + lc->fec = cc_fec; } else { - c.u.l1cfg.rcap = cpu_to_be32(lc->advertising | fc | fec | mdi); + rcap = lc->acaps | fw_fc | fw_fec | fw_mdi; } - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); + /* And send that on to the Firmware ... + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_EXEC | + V_FW_PORT_CMD_PORTID(port)); + cmd.action_to_len16 = + cpu_to_be32(V_FW_PORT_CMD_ACTION(fw_caps == FW_CAPS16 ? + FW_PORT_ACTION_L1_CFG : + FW_PORT_ACTION_L1_CFG32) | + FW_LEN16(cmd)); + + if (fw_caps == FW_CAPS16) + cmd.u.l1cfg.rcap = cpu_to_be32(fwcaps32_to_caps16(rcap)); + else + cmd.u.l1cfg32.rcap32 = cpu_to_be32(rcap); + + return t4_wr_mbox(adap, mbox, &cmd, sizeof(cmd), NULL); } /** @@ -3821,12 +4098,17 @@ int t4_free_vi(struct adapter *adap, unsigned int mbox, unsigned int pf, memset(&c, 0, sizeof(c)); c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_VI_CMD) | F_FW_CMD_REQUEST | - F_FW_CMD_EXEC | V_FW_VI_CMD_PFN(pf) | - V_FW_VI_CMD_VFN(vf)); + F_FW_CMD_EXEC); + if (is_pf4(adap)) + c.op_to_vfn |= cpu_to_be32(V_FW_VI_CMD_PFN(pf) | + V_FW_VI_CMD_VFN(vf)); c.alloc_to_len16 = cpu_to_be32(F_FW_VI_CMD_FREE | FW_LEN16(c)); c.type_to_viid = cpu_to_be16(V_FW_VI_CMD_VIID(viid)); - return t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (is_pf4(adap)) + return t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + else + return t4vf_wr_mbox(adap, &c, sizeof(c), NULL); } /** @@ -3872,7 +4154,117 @@ int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid, V_FW_VI_RXMODE_CMD_ALLMULTIEN(all_multi) | V_FW_VI_RXMODE_CMD_BROADCASTEN(bcast) | V_FW_VI_RXMODE_CMD_VLANEXEN(vlanex)); - return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok); + if (is_pf4(adap)) + return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, + sleep_ok); + else + return t4vf_wr_mbox(adap, &c, sizeof(c), NULL); +} + +/** + * t4_alloc_raw_mac_filt - Adds a raw mac entry in mps tcam + * @adap: the adapter + * @viid: the VI id + * @mac: the MAC address + * @mask: the mask + * @idx: index at which to add this entry + * @port_id: the port index + * @lookup_type: MAC address for inner (1) or outer (0) header + * @sleep_ok: call is allowed to sleep + * + * Adds the mac entry at the specified index using raw mac interface. + * + * Returns a negative error number or the allocated index for this mac. + */ +int t4_alloc_raw_mac_filt(struct adapter *adap, unsigned int viid, + const u8 *addr, const u8 *mask, unsigned int idx, + u8 lookup_type, u8 port_id, bool sleep_ok) +{ + int ret = 0; + struct fw_vi_mac_cmd c; + struct fw_vi_mac_raw *p = &c.u.raw; + u32 val; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_WRITE | + V_FW_VI_MAC_CMD_VIID(viid)); + val = V_FW_CMD_LEN16(1) | + V_FW_VI_MAC_CMD_ENTRY_TYPE(FW_VI_MAC_TYPE_RAW); + c.freemacs_to_len16 = cpu_to_be32(val); + + /* Specify that this is an inner mac address */ + p->raw_idx_pkd = cpu_to_be32(V_FW_VI_MAC_CMD_RAW_IDX(idx)); + + /* Lookup Type. Outer header: 0, Inner header: 1 */ + p->data0_pkd = cpu_to_be32(V_DATALKPTYPE(lookup_type) | + V_DATAPORTNUM(port_id)); + /* Lookup mask and port mask */ + p->data0m_pkd = cpu_to_be64(V_DATALKPTYPE(M_DATALKPTYPE) | + V_DATAPORTNUM(M_DATAPORTNUM)); + + /* Copy the address and the mask */ + memcpy((u8 *)&p->data1[0] + 2, addr, ETHER_ADDR_LEN); + memcpy((u8 *)&p->data1m[0] + 2, mask, ETHER_ADDR_LEN); + + ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok); + if (ret == 0) { + ret = G_FW_VI_MAC_CMD_RAW_IDX(be32_to_cpu(p->raw_idx_pkd)); + if (ret != (int)idx) + ret = -ENOMEM; + } + + return ret; +} + +/** + * t4_free_raw_mac_filt - Frees a raw mac entry in mps tcam + * @adap: the adapter + * @viid: the VI id + * @addr: the MAC address + * @mask: the mask + * @idx: index of the entry in mps tcam + * @lookup_type: MAC address for inner (1) or outer (0) header + * @port_id: the port index + * @sleep_ok: call is allowed to sleep + * + * Removes the mac entry at the specified index using raw mac interface. + * + * Returns a negative error number on failure. + */ +int t4_free_raw_mac_filt(struct adapter *adap, unsigned int viid, + const u8 *addr, const u8 *mask, unsigned int idx, + u8 lookup_type, u8 port_id, bool sleep_ok) +{ + struct fw_vi_mac_cmd c; + struct fw_vi_mac_raw *p = &c.u.raw; + u32 raw; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_WRITE | + V_FW_CMD_EXEC(0) | + V_FW_VI_MAC_CMD_VIID(viid)); + raw = V_FW_VI_MAC_CMD_ENTRY_TYPE(FW_VI_MAC_TYPE_RAW); + c.freemacs_to_len16 = cpu_to_be32(V_FW_VI_MAC_CMD_FREEMACS(0) | + raw | + V_FW_CMD_LEN16(1)); + + p->raw_idx_pkd = cpu_to_be32(V_FW_VI_MAC_CMD_RAW_IDX(idx) | + FW_VI_MAC_ID_BASED_FREE); + + /* Lookup Type. Outer header: 0, Inner header: 1 */ + p->data0_pkd = cpu_to_be32(V_DATALKPTYPE(lookup_type) | + V_DATAPORTNUM(port_id)); + /* Lookup mask and port mask */ + p->data0m_pkd = cpu_to_be64(V_DATALKPTYPE(M_DATALKPTYPE) | + V_DATAPORTNUM(M_DATAPORTNUM)); + + /* Copy the address and the mask */ + memcpy((u8 *)&p->data1[0] + 2, addr, ETHER_ADDR_LEN); + memcpy((u8 *)&p->data1m[0] + 2, mask, ETHER_ADDR_LEN); + + return t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok); } /** @@ -3919,7 +4311,10 @@ int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid, V_FW_VI_MAC_CMD_IDX(idx)); memcpy(p->macaddr, addr, sizeof(p->macaddr)); - ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (is_pf4(adap)) + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + else + ret = t4vf_wr_mbox(adap, &c, sizeof(c), &c); if (ret == 0) { ret = G_FW_VI_MAC_CMD_IDX(be16_to_cpu(p->valid_to_idx)); if (ret >= max_mac_addr) @@ -3953,7 +4348,10 @@ int t4_enable_vi_params(struct adapter *adap, unsigned int mbox, V_FW_VI_ENABLE_CMD_EEN(tx_en) | V_FW_VI_ENABLE_CMD_DCB_INFO(dcb_en) | FW_LEN16(c)); - return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL); + if (is_pf4(adap)) + return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL); + else + return t4vf_wr_mbox_ns(adap, &c, sizeof(c), NULL); } /** @@ -3994,15 +4392,20 @@ int t4_iq_start_stop(struct adapter *adap, unsigned int mbox, bool start, memset(&c, 0, sizeof(c)); c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST | - F_FW_CMD_EXEC | V_FW_IQ_CMD_PFN(pf) | - V_FW_IQ_CMD_VFN(vf)); + F_FW_CMD_EXEC); c.alloc_to_len16 = cpu_to_be32(V_FW_IQ_CMD_IQSTART(start) | V_FW_IQ_CMD_IQSTOP(!start) | FW_LEN16(c)); c.iqid = cpu_to_be16(iqid); c.fl0id = cpu_to_be16(fl0id); c.fl1id = cpu_to_be16(fl1id); - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); + if (is_pf4(adap)) { + c.op_to_vfn |= cpu_to_be32(V_FW_IQ_CMD_PFN(pf) | + V_FW_IQ_CMD_VFN(vf)); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); + } else { + return t4vf_wr_mbox(adap, &c, sizeof(c), NULL); + } } /** @@ -4026,14 +4429,19 @@ int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, memset(&c, 0, sizeof(c)); c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST | - F_FW_CMD_EXEC | V_FW_IQ_CMD_PFN(pf) | - V_FW_IQ_CMD_VFN(vf)); + F_FW_CMD_EXEC); + if (is_pf4(adap)) + c.op_to_vfn |= cpu_to_be32(V_FW_IQ_CMD_PFN(pf) | + V_FW_IQ_CMD_VFN(vf)); c.alloc_to_len16 = cpu_to_be32(F_FW_IQ_CMD_FREE | FW_LEN16(c)); c.type_to_iqandstindex = cpu_to_be32(V_FW_IQ_CMD_TYPE(iqtype)); c.iqid = cpu_to_be16(iqid); c.fl0id = cpu_to_be16(fl0id); c.fl1id = cpu_to_be16(fl1id); - return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); + if (is_pf4(adap)) + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); + else + return t4vf_wr_mbox(adap, &c, sizeof(c), NULL); } /** @@ -4053,11 +4461,203 @@ int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, memset(&c, 0, sizeof(c)); c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_EQ_ETH_CMD) | - F_FW_CMD_REQUEST | F_FW_CMD_EXEC | - V_FW_EQ_ETH_CMD_PFN(pf) | - V_FW_EQ_ETH_CMD_VFN(vf)); + F_FW_CMD_REQUEST | F_FW_CMD_EXEC); + if (is_pf4(adap)) + c.op_to_vfn |= cpu_to_be32(V_FW_IQ_CMD_PFN(pf) | + V_FW_IQ_CMD_VFN(vf)); c.alloc_to_len16 = cpu_to_be32(F_FW_EQ_ETH_CMD_FREE | FW_LEN16(c)); c.eqid_pkd = cpu_to_be32(V_FW_EQ_ETH_CMD_EQID(eqid)); + if (is_pf4(adap)) + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); + else + return t4vf_wr_mbox(adap, &c, sizeof(c), NULL); +} + +/** + * t4_link_down_rc_str - return a string for a Link Down Reason Code + * @link_down_rc: Link Down Reason Code + * + * Returns a string representation of the Link Down Reason Code. + */ +static const char *t4_link_down_rc_str(unsigned char link_down_rc) +{ + static const char * const reason[] = { + "Link Down", + "Remote Fault", + "Auto-negotiation Failure", + "Reserved", + "Insufficient Airflow", + "Unable To Determine Reason", + "No RX Signal Detected", + "Reserved", + }; + + if (link_down_rc >= ARRAY_SIZE(reason)) + return "Bad Reason Code"; + + return reason[link_down_rc]; +} + +/* Return the highest speed set in the port capabilities, in Mb/s. */ +static unsigned int fwcap_to_speed(fw_port_cap32_t caps) +{ +#define TEST_SPEED_RETURN(__caps_speed, __speed) \ + do { \ + if (caps & FW_PORT_CAP32_SPEED_##__caps_speed) \ + return __speed; \ + } while (0) + + TEST_SPEED_RETURN(100G, 100000); + TEST_SPEED_RETURN(50G, 50000); + TEST_SPEED_RETURN(40G, 40000); + TEST_SPEED_RETURN(25G, 25000); + TEST_SPEED_RETURN(10G, 10000); + TEST_SPEED_RETURN(1G, 1000); + TEST_SPEED_RETURN(100M, 100); + +#undef TEST_SPEED_RETURN + + return 0; +} + +/** + * t4_handle_get_port_info - process a FW reply message + * @pi: the port info + * @rpl: start of the FW message + * + * Processes a GET_PORT_INFO FW reply message. + */ +static void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) +{ + const struct fw_port_cmd *cmd = (const void *)rpl; + int action = G_FW_PORT_CMD_ACTION(be32_to_cpu(cmd->action_to_len16)); + fw_port_cap32_t pcaps, acaps, linkattr; + struct link_config *lc = &pi->link_cfg; + struct adapter *adapter = pi->adapter; + enum fw_port_module_type mod_type; + enum fw_port_type port_type; + unsigned int speed, fc, fec; + int link_ok, linkdnrc; + + /* Extract the various fields from the Port Information message. + */ + switch (action) { + case FW_PORT_ACTION_GET_PORT_INFO: { + u32 lstatus = be32_to_cpu(cmd->u.info.lstatus_to_modtype); + + link_ok = (lstatus & F_FW_PORT_CMD_LSTATUS) != 0; + linkdnrc = G_FW_PORT_CMD_LINKDNRC(lstatus); + port_type = G_FW_PORT_CMD_PTYPE(lstatus); + mod_type = G_FW_PORT_CMD_MODTYPE(lstatus); + pcaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.pcap)); + acaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.acap)); + + /* Unfortunately the format of the Link Status in the old + * 16-bit Port Information message isn't the same as the + * 16-bit Port Capabilities bitfield used everywhere else ... + */ + linkattr = 0; + if (lstatus & F_FW_PORT_CMD_RXPAUSE) + linkattr |= FW_PORT_CAP32_FC_RX; + if (lstatus & F_FW_PORT_CMD_TXPAUSE) + linkattr |= FW_PORT_CAP32_FC_TX; + if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M)) + linkattr |= FW_PORT_CAP32_SPEED_100M; + if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G)) + linkattr |= FW_PORT_CAP32_SPEED_1G; + if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G)) + linkattr |= FW_PORT_CAP32_SPEED_10G; + if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_25G)) + linkattr |= FW_PORT_CAP32_SPEED_25G; + if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_40G)) + linkattr |= FW_PORT_CAP32_SPEED_40G; + if (lstatus & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100G)) + linkattr |= FW_PORT_CAP32_SPEED_100G; + + break; + } + + case FW_PORT_ACTION_GET_PORT_INFO32: { + u32 lstatus32 = + be32_to_cpu(cmd->u.info32.lstatus32_to_cbllen32); + + link_ok = (lstatus32 & F_FW_PORT_CMD_LSTATUS32) != 0; + linkdnrc = G_FW_PORT_CMD_LINKDNRC32(lstatus32); + port_type = G_FW_PORT_CMD_PORTTYPE32(lstatus32); + mod_type = G_FW_PORT_CMD_MODTYPE32(lstatus32); + pcaps = be32_to_cpu(cmd->u.info32.pcaps32); + acaps = be32_to_cpu(cmd->u.info32.acaps32); + linkattr = be32_to_cpu(cmd->u.info32.linkattr32); + break; + } + + default: + dev_warn(adapter, "Handle Port Information: Bad Command/Action %#x\n", + be32_to_cpu(cmd->action_to_len16)); + return; + } + + fec = fwcap_to_cc_fec(acaps); + + fc = fwcap_to_cc_pause(linkattr); + speed = fwcap_to_speed(linkattr); + + if (mod_type != pi->mod_type) { + lc->auto_fec = fec; + pi->port_type = port_type; + pi->mod_type = mod_type; + t4_os_portmod_changed(adapter, pi->pidx); + } + if (link_ok != lc->link_ok || speed != lc->speed || + fc != lc->fc || fec != lc->fec) { /* something changed */ + if (!link_ok && lc->link_ok) { + lc->link_down_rc = linkdnrc; + dev_warn(adap, "Port %d link down, reason: %s\n", + pi->tx_chan, t4_link_down_rc_str(linkdnrc)); + } + lc->link_ok = link_ok; + lc->speed = speed; + lc->fc = fc; + lc->fec = fec; + lc->pcaps = pcaps; + lc->acaps = acaps & ADVERT_MASK; + + if (lc->acaps & FW_PORT_CAP32_ANEG) { + lc->autoneg = AUTONEG_ENABLE; + } else { + /* When Autoneg is disabled, user needs to set + * single speed. + * Similar to cxgb4_ethtool.c: set_link_ksettings + */ + lc->acaps = 0; + lc->requested_speed = fwcap_to_speed(acaps); + lc->autoneg = AUTONEG_DISABLE; + } + } +} + +/** + * t4_ctrl_eq_free - free a control egress queue + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF owning the queue + * @vf: the VF owning the queue + * @eqid: egress queue id + * + * Frees a control egress queue. + */ +int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int eqid) +{ + struct fw_eq_ctrl_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_EQ_CTRL_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_EXEC | + V_FW_EQ_CTRL_CMD_PFN(pf) | + V_FW_EQ_CTRL_CMD_VFN(vf)); + c.alloc_to_len16 = cpu_to_be32(F_FW_EQ_CTRL_CMD_FREE | FW_LEN16(c)); + c.cmpliqid_eqid = cpu_to_be32(V_FW_EQ_CTRL_CMD_EQID(eqid)); return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); } @@ -4082,67 +4682,21 @@ int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl) unsigned int action = G_FW_PORT_CMD_ACTION(be32_to_cpu(p->action_to_len16)); - if (opcode == FW_PORT_CMD && action == FW_PORT_ACTION_GET_PORT_INFO) { + if (opcode == FW_PORT_CMD && + (action == FW_PORT_ACTION_GET_PORT_INFO || + action == FW_PORT_ACTION_GET_PORT_INFO32)) { /* link/module state change message */ - unsigned int speed = 0, fc = 0, i; int chan = G_FW_PORT_CMD_PORTID(be32_to_cpu(p->op_to_portid)); struct port_info *pi = NULL; - struct link_config *lc; - u32 stat = be32_to_cpu(p->u.info.lstatus_to_modtype); - int link_ok = (stat & F_FW_PORT_CMD_LSTATUS) != 0; - u32 mod = G_FW_PORT_CMD_MODTYPE(stat); - - if (stat & F_FW_PORT_CMD_RXPAUSE) - fc |= PAUSE_RX; - if (stat & F_FW_PORT_CMD_TXPAUSE) - fc |= PAUSE_TX; - if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M)) - speed = ETH_SPEED_NUM_100M; - else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G)) - speed = ETH_SPEED_NUM_1G; - else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G)) - speed = ETH_SPEED_NUM_10G; - else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_25G)) - speed = ETH_SPEED_NUM_25G; - else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_40G)) - speed = ETH_SPEED_NUM_40G; - else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100G)) - speed = ETH_SPEED_NUM_100G; + int i; for_each_port(adap, i) { pi = adap2pinfo(adap, i); if (pi->tx_chan == chan) break; } - lc = &pi->link_cfg; - if (mod != pi->mod_type) { - pi->mod_type = mod; - t4_os_portmod_changed(adap, i); - } - if (link_ok != lc->link_ok || speed != lc->speed || - fc != lc->fc) { /* something changed */ - if (!link_ok && lc->link_ok) { - static const char * const reason[] = { - "Link Down", - "Remote Fault", - "Auto-negotiation Failure", - "Reserved", - "Insufficient Airflow", - "Unable To Determine Reason", - "No RX Signal Detected", - "Reserved", - }; - unsigned int rc = G_FW_PORT_CMD_LINKDNRC(stat); - - dev_warn(adap, "Port %d link down, reason: %s\n", - chan, reason[rc]); - } - lc->link_ok = link_ok; - lc->speed = speed; - lc->fc = fc; - lc->supported = be16_to_cpu(p->u.info.pcap); - } + t4_handle_get_port_info(pi, rpl); } else { dev_warn(adap, "Unknown firmware reply %d\n", opcode); return -EINVAL; @@ -4171,12 +4725,10 @@ void t4_reset_link_config(struct adapter *adap, int idx) * Initializes the SW state maintained for each link, including the link's * capabilities and default speed/flow-control/autonegotiation settings. */ -static void init_link_config(struct link_config *lc, unsigned int pcaps, - unsigned int acaps) +void init_link_config(struct link_config *lc, fw_port_cap32_t pcaps, + fw_port_cap32_t acaps) { - unsigned int fec; - - lc->supported = pcaps; + lc->pcaps = pcaps; lc->requested_speed = 0; lc->speed = 0; lc->requested_fc = 0; @@ -4186,21 +4738,16 @@ static void init_link_config(struct link_config *lc, unsigned int pcaps, * For Forward Error Control, we default to whatever the Firmware * tells us the Link is currently advertising. */ - fec = 0; - if (acaps & FW_PORT_CAP_FEC_RS) - fec |= FEC_RS; - if (acaps & FW_PORT_CAP_FEC_BASER_RS) - fec |= FEC_BASER_RS; - if (acaps & FW_PORT_CAP_FEC_RESERVED) - fec |= FEC_RESERVED; - lc->requested_fec = fec; - lc->fec = fec; - - if (lc->supported & FW_PORT_CAP_ANEG) { - lc->advertising = lc->supported & ADVERT_MASK; + lc->auto_fec = fwcap_to_cc_fec(acaps); + lc->requested_fec = FEC_AUTO; + lc->fec = lc->auto_fec; + + if (lc->pcaps & FW_PORT_CAP32_ANEG) { + lc->acaps = lc->pcaps & ADVERT_MASK; lc->autoneg = AUTONEG_ENABLE; + lc->requested_fc |= PAUSE_AUTONEG; } else { - lc->advertising = 0; + lc->acaps = 0; lc->autoneg = AUTONEG_DISABLE; } } @@ -4240,9 +4787,8 @@ struct flash_desc { int t4_get_flash_params(struct adapter *adapter) { /* - * Table for non-Numonix supported flash parts. Numonix parts are left - * to the preexisting well-tested code. All flash parts have 64KB - * sectors. + * Table for non-standard supported Flash parts. Note, all Flash + * parts must have 64KB sectors. */ static struct flash_desc supported_flash[] = { { 0x00150201, 4 << 20 }, /* Spansion 4MB S25FL032P */ @@ -4251,7 +4797,7 @@ int t4_get_flash_params(struct adapter *adapter) int ret; u32 flashid = 0; unsigned int part, manufacturer; - unsigned int density, size; + unsigned int density, size = 0; /** * Issue a Read ID Command to the Flash part. We decode supported @@ -4266,6 +4812,9 @@ int t4_get_flash_params(struct adapter *adapter) if (ret < 0) return ret; + /** + * Check to see if it's one of our non-standard supported Flash parts. + */ for (part = 0; part < ARRAY_SIZE(supported_flash); part++) { if (supported_flash[part].vendor_and_model_id == flashid) { adapter->params.sf_size = @@ -4276,6 +4825,15 @@ int t4_get_flash_params(struct adapter *adapter) } } + /** + * Decode Flash part size. The code below looks repetative with + * common encodings, but that's not guaranteed in the JEDEC + * specification for the Read JADEC ID command. The only thing that + * we're guaranteed by the JADEC specification is where the + * Manufacturer ID is in the returned result. After that each + * Manufacturer ~could~ encode things completely differently. + * Note, all Flash parts must have 64KB sectors. + */ manufacturer = flashid & 0xff; switch (manufacturer) { case 0x20: { /* Micron/Numonix */ @@ -4312,21 +4870,81 @@ int t4_get_flash_params(struct adapter *adapter) case 0x22: size = 1 << 28; /* 256MB */ break; - default: - dev_err(adapter, "Micron Flash Part has bad size, ID = %#x, Density code = %#x\n", - flashid, density); - return -EINVAL; } + break; + } - adapter->params.sf_size = size; - adapter->params.sf_nsec = size / SF_SEC_SIZE; + case 0x9d: { /* ISSI -- Integrated Silicon Solution, Inc. */ + /** + * This Density -> Size decoding table is taken from ISSI + * Data Sheets. + */ + density = (flashid >> 16) & 0xff; + switch (density) { + case 0x16: + size = 1 << 25; /* 32MB */ + break; + case 0x17: + size = 1 << 26; /* 64MB */ + break; + } break; } - default: - dev_err(adapter, "Unsupported Flash Part, ID = %#x\n", flashid); - return -EINVAL; + + case 0xc2: { /* Macronix */ + /** + * This Density -> Size decoding table is taken from Macronix + * Data Sheets. + */ + density = (flashid >> 16) & 0xff; + switch (density) { + case 0x17: + size = 1 << 23; /* 8MB */ + break; + case 0x18: + size = 1 << 24; /* 16MB */ + break; + } + break; } + case 0xef: { /* Winbond */ + /** + * This Density -> Size decoding table is taken from Winbond + * Data Sheets. + */ + density = (flashid >> 16) & 0xff; + switch (density) { + case 0x17: + size = 1 << 23; /* 8MB */ + break; + case 0x18: + size = 1 << 24; /* 16MB */ + break; + } + break; + } + } + + /* If we didn't recognize the FLASH part, that's no real issue: the + * Hardware/Software contract says that Hardware will _*ALWAYS*_ + * use a FLASH part which is at least 4MB in size and has 64KB + * sectors. The unrecognized FLASH part is likely to be much larger + * than 4MB, but that's all we really need. + */ + if (size == 0) { + dev_warn(adapter, + "Unknown Flash Part, ID = %#x, assuming 4MB\n", + flashid); + size = 1 << 22; + } + + /** + * Store decoded Flash size and fall through into vetting code. + */ + adapter->params.sf_size = size; + adapter->params.sf_nsec = size / SF_SEC_SIZE; + found: /* * We should reject adapters with FLASHes which are too small. So, emit @@ -4631,6 +5249,10 @@ int t4_init_tp_params(struct adapter *adap) adap->params.tp.port_shift = t4_filter_field_shift(adap, F_PORT); adap->params.tp.protocol_shift = t4_filter_field_shift(adap, F_PROTOCOL); + adap->params.tp.ethertype_shift = t4_filter_field_shift(adap, + F_ETHERTYPE); + adap->params.tp.macmatch_shift = t4_filter_field_shift(adap, + F_MACMATCH); /* * If TP_INGRESS_CONFIG.VNID == 0, then TP_VLAN_PRI_MAP.VNIC_ID @@ -4639,6 +5261,11 @@ int t4_init_tp_params(struct adapter *adap) if ((adap->params.tp.ingress_config & F_VNIC) == 0) adap->params.tp.vnic_shift = -1; + v = t4_read_reg(adap, LE_3_DB_HASH_MASK_GEN_IPV4_T6_A); + adap->params.tp.hash_filter_mask = v; + v = t4_read_reg(adap, LE_4_DB_HASH_MASK_GEN_IPV4_T6_A); + adap->params.tp.hash_filter_mask |= ((u64)v << 32); + return 0; } @@ -4721,47 +5348,305 @@ int t4_init_rss_mode(struct adapter *adap, int mbox) int t4_port_init(struct adapter *adap, int mbox, int pf, int vf) { - u8 addr[6]; + unsigned int fw_caps = adap->params.fw_caps_support; + fw_port_cap32_t pcaps, acaps; + enum fw_port_type port_type; + struct fw_port_cmd cmd; int ret, i, j = 0; - struct fw_port_cmd c; + int mdio_addr; + u32 action; + u8 addr[6]; - memset(&c, 0, sizeof(c)); + memset(&cmd, 0, sizeof(cmd)); for_each_port(adap, i) { + struct port_info *pi = adap2pinfo(adap, i); unsigned int rss_size = 0; - struct port_info *p = adap2pinfo(adap, i); while ((adap->params.portvec & (1 << j)) == 0) j++; - c.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) | - F_FW_CMD_REQUEST | F_FW_CMD_READ | - V_FW_PORT_CMD_PORTID(j)); - c.action_to_len16 = cpu_to_be32(V_FW_PORT_CMD_ACTION( - FW_PORT_ACTION_GET_PORT_INFO) | - FW_LEN16(c)); - ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + /* If we haven't yet determined whether we're talking to + * Firmware which knows the new 32-bit Port Capabilities, it's + * time to find out now. This will also tell new Firmware to + * send us Port Status Updates using the new 32-bit Port + * Capabilities version of the Port Information message. + */ + if (fw_caps == FW_CAPS_UNKNOWN) { + u32 param, val, caps; + + caps = FW_PARAMS_PARAM_PFVF_PORT_CAPS32; + param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | + V_FW_PARAMS_PARAM_X(caps)); + val = 1; + ret = t4_set_params(adap, mbox, pf, vf, 1, ¶m, + &val); + fw_caps = ret == 0 ? FW_CAPS32 : FW_CAPS16; + adap->params.fw_caps_support = fw_caps; + } + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) | + F_FW_CMD_REQUEST | + F_FW_CMD_READ | + V_FW_PORT_CMD_PORTID(j)); + action = fw_caps == FW_CAPS16 ? FW_PORT_ACTION_GET_PORT_INFO : + FW_PORT_ACTION_GET_PORT_INFO32; + cmd.action_to_len16 = cpu_to_be32(V_FW_PORT_CMD_ACTION(action) | + FW_LEN16(cmd)); + ret = t4_wr_mbox(pi->adapter, mbox, &cmd, sizeof(cmd), &cmd); if (ret) return ret; + /* Extract the various fields from the Port Information message. + */ + if (fw_caps == FW_CAPS16) { + u32 lstatus = + be32_to_cpu(cmd.u.info.lstatus_to_modtype); + + port_type = G_FW_PORT_CMD_PTYPE(lstatus); + mdio_addr = (lstatus & F_FW_PORT_CMD_MDIOCAP) ? + (int)G_FW_PORT_CMD_MDIOADDR(lstatus) : -1; + pcaps = be16_to_cpu(cmd.u.info.pcap); + acaps = be16_to_cpu(cmd.u.info.acap); + pcaps = fwcaps16_to_caps32(pcaps); + acaps = fwcaps16_to_caps32(acaps); + } else { + u32 lstatus32 = + be32_to_cpu(cmd.u.info32.lstatus32_to_cbllen32); + + port_type = G_FW_PORT_CMD_PORTTYPE32(lstatus32); + mdio_addr = (lstatus32 & F_FW_PORT_CMD_MDIOCAP32) ? + (int)G_FW_PORT_CMD_MDIOADDR32(lstatus32) : + -1; + pcaps = be32_to_cpu(cmd.u.info32.pcaps32); + acaps = be32_to_cpu(cmd.u.info32.acaps32); + } + ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &rss_size); if (ret < 0) return ret; - p->viid = ret; - p->tx_chan = j; - p->rss_size = rss_size; + pi->viid = ret; + pi->tx_chan = j; + pi->rss_size = rss_size; t4_os_set_hw_addr(adap, i, addr); - ret = be32_to_cpu(c.u.info.lstatus_to_modtype); - p->mdio_addr = (ret & F_FW_PORT_CMD_MDIOCAP) ? - G_FW_PORT_CMD_MDIOADDR(ret) : -1; - p->port_type = G_FW_PORT_CMD_PTYPE(ret); - p->mod_type = FW_PORT_MOD_TYPE_NA; + pi->port_type = port_type; + pi->mdio_addr = mdio_addr; + pi->mod_type = FW_PORT_MOD_TYPE_NA; - init_link_config(&p->link_cfg, be16_to_cpu(c.u.info.pcap), - be16_to_cpu(c.u.info.acap)); + init_link_config(&pi->link_cfg, pcaps, acaps); j++; } return 0; } + +/** + * t4_memory_rw_addr - read/write adapter memory via PCIE memory window + * @adap: the adapter + * @win: PCI-E Memory Window to use + * @addr: address within adapter memory + * @len: amount of memory to transfer + * @hbuf: host memory buffer + * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0) + * + * Reads/writes an [almost] arbitrary memory region in the firmware: the + * firmware memory address and host buffer must be aligned on 32-bit + * boudaries; the length may be arbitrary. + * + * NOTES: + * 1. The memory is transferred as a raw byte sequence from/to the + * firmware's memory. If this memory contains data structures which + * contain multi-byte integers, it's the caller's responsibility to + * perform appropriate byte order conversions. + * + * 2. It is the Caller's responsibility to ensure that no other code + * uses the specified PCI-E Memory Window while this routine is + * using it. This is typically done via the use of OS-specific + * locks, etc. + */ +int t4_memory_rw_addr(struct adapter *adap, int win, u32 addr, + u32 len, void *hbuf, int dir) +{ + u32 pos, offset, resid; + u32 win_pf, mem_reg, mem_aperture, mem_base; + u32 *buf; + + /* Argument sanity checks ...*/ + if (addr & 0x3 || (uintptr_t)hbuf & 0x3) + return -EINVAL; + buf = (u32 *)hbuf; + + /* It's convenient to be able to handle lengths which aren't a + * multiple of 32-bits because we often end up transferring files to + * the firmware. So we'll handle that by normalizing the length here + * and then handling any residual transfer at the end. + */ + resid = len & 0x3; + len -= resid; + + /* Each PCI-E Memory Window is programmed with a window size -- or + * "aperture" -- which controls the granularity of its mapping onto + * adapter memory. We need to grab that aperture in order to know + * how to use the specified window. The window is also programmed + * with the base address of the Memory Window in BAR0's address + * space. For T4 this is an absolute PCI-E Bus Address. For T5 + * the address is relative to BAR0. + */ + mem_reg = t4_read_reg(adap, + PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_BASE_WIN, + win)); + mem_aperture = 1 << (G_WINDOW(mem_reg) + X_WINDOW_SHIFT); + mem_base = G_PCIEOFST(mem_reg) << X_PCIEOFST_SHIFT; + + win_pf = is_t4(adap->params.chip) ? 0 : V_PFNUM(adap->pf); + + /* Calculate our initial PCI-E Memory Window Position and Offset into + * that Window. + */ + pos = addr & ~(mem_aperture - 1); + offset = addr - pos; + + /* Set up initial PCI-E Memory Window to cover the start of our + * transfer. (Read it back to ensure that changes propagate before we + * attempt to use the new value.) + */ + t4_write_reg(adap, + PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, win), + pos | win_pf); + t4_read_reg(adap, + PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, win)); + + /* Transfer data to/from the adapter as long as there's an integral + * number of 32-bit transfers to complete. + * + * A note on Endianness issues: + * + * The "register" reads and writes below from/to the PCI-E Memory + * Window invoke the standard adapter Big-Endian to PCI-E Link + * Little-Endian "swizzel." As a result, if we have the following + * data in adapter memory: + * + * Memory: ... | b0 | b1 | b2 | b3 | ... + * Address: i+0 i+1 i+2 i+3 + * + * Then a read of the adapter memory via the PCI-E Memory Window + * will yield: + * + * x = readl(i) + * 31 0 + * [ b3 | b2 | b1 | b0 ] + * + * If this value is stored into local memory on a Little-Endian system + * it will show up correctly in local memory as: + * + * ( ..., b0, b1, b2, b3, ... ) + * + * But on a Big-Endian system, the store will show up in memory + * incorrectly swizzled as: + * + * ( ..., b3, b2, b1, b0, ... ) + * + * So we need to account for this in the reads and writes to the + * PCI-E Memory Window below by undoing the register read/write + * swizzels. + */ + while (len > 0) { + if (dir == T4_MEMORY_READ) + *buf++ = le32_to_cpu((__le32)t4_read_reg(adap, + mem_base + + offset)); + else + t4_write_reg(adap, mem_base + offset, + (u32)cpu_to_le32(*buf++)); + offset += sizeof(__be32); + len -= sizeof(__be32); + + /* If we've reached the end of our current window aperture, + * move the PCI-E Memory Window on to the next. Note that + * doing this here after "len" may be 0 allows us to set up + * the PCI-E Memory Window for a possible final residual + * transfer below ... + */ + if (offset == mem_aperture) { + pos += mem_aperture; + offset = 0; + t4_write_reg(adap, + PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, + win), pos | win_pf); + t4_read_reg(adap, + PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, + win)); + } + } + + /* If the original transfer had a length which wasn't a multiple of + * 32-bits, now's where we need to finish off the transfer of the + * residual amount. The PCI-E Memory Window has already been moved + * above (if necessary) to cover this final transfer. + */ + if (resid) { + union { + u32 word; + char byte[4]; + } last; + unsigned char *bp; + int i; + + if (dir == T4_MEMORY_READ) { + last.word = le32_to_cpu((__le32)t4_read_reg(adap, + mem_base + + offset)); + for (bp = (unsigned char *)buf, i = resid; i < 4; i++) + bp[i] = last.byte[i]; + } else { + last.word = *buf; + for (i = resid; i < 4; i++) + last.byte[i] = 0; + t4_write_reg(adap, mem_base + offset, + (u32)cpu_to_le32(last.word)); + } + } + + return 0; +} + +/** + * t4_memory_rw_mtype -read/write EDC 0, EDC 1 or MC via PCIE memory window + * @adap: the adapter + * @win: PCI-E Memory Window to use + * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC + * @maddr: address within indicated memory type + * @len: amount of memory to transfer + * @hbuf: host memory buffer + * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0) + * + * Reads/writes adapter memory using t4_memory_rw_addr(). This routine + * provides an (memory type, address within memory type) interface. + */ +int t4_memory_rw_mtype(struct adapter *adap, int win, int mtype, u32 maddr, + u32 len, void *hbuf, int dir) +{ + u32 mtype_offset; + u32 edc_size, mc_size; + + /* Offset into the region of memory which is being accessed + * MEM_EDC0 = 0 + * MEM_EDC1 = 1 + * MEM_MC = 2 -- MEM_MC for chips with only 1 memory controller + * MEM_MC1 = 3 -- for chips with 2 memory controllers (e.g. T5) + */ + edc_size = G_EDRAM0_SIZE(t4_read_reg(adap, A_MA_EDRAM0_BAR)); + if (mtype != MEM_MC1) { + mtype_offset = (mtype * (edc_size * 1024 * 1024)); + } else { + mc_size = G_EXT_MEM0_SIZE(t4_read_reg(adap, + A_MA_EXT_MEMORY0_BAR)); + mtype_offset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024; + } + + return t4_memory_rw_addr(adap, win, + mtype_offset + maddr, len, + hbuf, dir); +}