X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=drivers%2Fnet%2Fi40e%2Fi40e_pf.h;h=041166372babe19e95edaebcaa6a0f83ea58c4db;hb=055c52583a2794da8ba1e85a48cce3832372b12f;hp=244bac370d86ee0ec54ae1262f701c67fe34152a;hpb=ce3d555e43e3795b5d9507fcfc76b7a0a92fd0d6;p=deb_dpdk.git

diff --git a/drivers/net/i40e/i40e_pf.h b/drivers/net/i40e/i40e_pf.h
index 244bac37..04116637 100644
--- a/drivers/net/i40e/i40e_pf.h
+++ b/drivers/net/i40e/i40e_pf.h
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -34,60 +34,10 @@
 #ifndef _I40E_PF_H_
 #define _I40E_PF_H_
 
-/* VERSION info to exchange between VF and PF host. In case VF works with
- *  ND kernel driver, it reads I40E_VIRTCHNL_VERSION_MAJOR/MINOR. In
- *  case works with DPDK host, it reads version below. Then VF realize who it
- *  is talking to and use proper language to communicate.
- * */
-#define I40E_DPDK_SIGNATURE     ('D' << 24 | 'P' << 16 | 'D' << 8 | 'K')
-#define I40E_DPDK_VERSION_MAJOR I40E_DPDK_SIGNATURE
-#define I40E_DPDK_VERSION_MINOR 0
-
 /* Default setting on number of VSIs that VF can contain */
 #define I40E_DEFAULT_VF_VSI_NUM 1
 
-#define I40E_DPDK_OFFSET  0x100
-
-/* DPDK pf driver specific command to VF */
-enum i40e_virtchnl_ops_dpdk {
-	/*
-	 * Keep some gap between Linux PF commands and
-	 * DPDK PF extended commands.
-	 */
-	I40E_VIRTCHNL_OP_CFG_VLAN_OFFLOAD = I40E_VIRTCHNL_OP_VERSION +
-						I40E_DPDK_OFFSET,
-	I40E_VIRTCHNL_OP_CFG_VLAN_PVID,
-	I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EXT,
-};
-
-/* A structure to support extended info of a receive queue. */
-struct i40e_virtchnl_rxq_ext_info {
-	uint8_t crcstrip;
-};
-
-/*
- * A structure to support extended info of queue pairs, an additional field
- * is added, comparing to original 'struct i40e_virtchnl_queue_pair_info'.
- */
-struct i40e_virtchnl_queue_pair_ext_info {
-	/* vsi_id and queue_id should be identical for both rx and tx queues.*/
-	struct i40e_virtchnl_txq_info txq;
-	struct i40e_virtchnl_rxq_info rxq;
-	struct i40e_virtchnl_rxq_ext_info rxq_ext;
-};
-
-/*
- * A structure to support extended info of VSI queue pairs,
- * 'struct i40e_virtchnl_queue_pair_ext_info' is used, see its original
- * of 'struct i40e_virtchnl_queue_pair_info'.
- */
-struct i40e_virtchnl_vsi_queue_config_ext_info {
-	uint16_t vsi_id;
-	uint16_t num_queue_pairs;
-	struct i40e_virtchnl_queue_pair_ext_info qpair[0];
-};
-
-struct i40e_virtchnl_vlan_offload_info {
+struct virtchnl_vlan_offload_info {
 	uint16_t vsi_id;
 	uint8_t enable_vlan_strip;
 	uint8_t reserved;
@@ -100,23 +50,14 @@ struct i40e_virtchnl_vlan_offload_info {
 #define I40E_VIRTCHNL_CONFIG_VSI_QUEUES_SIZE(x, n) \
 	(sizeof(*(x)) + sizeof((x)->qpair[0]) * (n))
 
-/*
- * I40E_VIRTCHNL_OP_CFG_VLAN_PVID
- * VF sends this message to enable/disable pvid. If it's
- * enable op, needs to specify the pvid. PF returns status
- * code in retval.
- */
-struct i40e_virtchnl_pvid_info {
-	uint16_t vsi_id;
-	struct i40e_vsi_vlan_pvid_info info;
-};
-
 int i40e_pf_host_vf_reset(struct i40e_pf_vf *vf, bool do_hw_reset);
 void i40e_pf_host_handle_vf_msg(struct rte_eth_dev *dev,
 				uint16_t abs_vf_id, uint32_t opcode,
-				__rte_unused uint32_t retval,
+				uint32_t retval,
 				uint8_t *msg, uint16_t msglen);
 int i40e_pf_host_init(struct rte_eth_dev *dev);
 int i40e_pf_host_uninit(struct rte_eth_dev *dev);
+void i40e_notify_vf_link_status(struct rte_eth_dev *dev,
+				struct i40e_pf_vf *vf);
 
 #endif /* _I40E_PF_H_ */