X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=drivers%2Fnet%2Fixgbe%2Fbase%2Fixgbe_common.c;h=e54fd306a398c9369c794ac30a4ed0c2b0fe251b;hb=39157ec04095ab012d11db23c462844634bfbb8f;hp=ec61408d73b195e2aaa699b21f7e025101a1b0f0;hpb=97f17497d162afdb82c8704bf097f0fee3724b2e;p=deb_dpdk.git

diff --git a/drivers/net/ixgbe/base/ixgbe_common.c b/drivers/net/ixgbe/base/ixgbe_common.c
index ec61408d..e54fd306 100644
--- a/drivers/net/ixgbe/base/ixgbe_common.c
+++ b/drivers/net/ixgbe/base/ixgbe_common.c
@@ -135,6 +135,7 @@ s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw)
 	/* Flow Control */
 	mac->ops.fc_enable = ixgbe_fc_enable_generic;
 	mac->ops.setup_fc = ixgbe_setup_fc_generic;
+	mac->ops.fc_autoneg = ixgbe_fc_autoneg;
 
 	/* Link */
 	mac->ops.get_link_capabilities = NULL;
@@ -165,15 +166,27 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
 	DEBUGFUNC("ixgbe_device_supports_autoneg_fc");
 
 	switch (hw->phy.media_type) {
+	case ixgbe_media_type_fiber_fixed:
 	case ixgbe_media_type_fiber_qsfp:
 	case ixgbe_media_type_fiber:
-		hw->mac.ops.check_link(hw, &speed, &link_up, false);
-		/* if link is down, assume supported */
-		if (link_up)
-			supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
+		/* flow control autoneg black list */
+		switch (hw->device_id) {
+		case IXGBE_DEV_ID_X550EM_A_SFP:
+		case IXGBE_DEV_ID_X550EM_A_SFP_N:
+		case IXGBE_DEV_ID_X550EM_A_QSFP:
+		case IXGBE_DEV_ID_X550EM_A_QSFP_N:
+			supported = false;
+			break;
+		default:
+			hw->mac.ops.check_link(hw, &speed, &link_up, false);
+			/* if link is down, assume supported */
+			if (link_up)
+				supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
 				true : false;
-		else
-			supported = true;
+			else
+				supported = true;
+		}
+
 		break;
 	case ixgbe_media_type_backplane:
 		supported = true;
@@ -184,9 +197,13 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
 		case IXGBE_DEV_ID_82599_T3_LOM:
 		case IXGBE_DEV_ID_X540T:
 		case IXGBE_DEV_ID_X540T1:
+		case IXGBE_DEV_ID_X540_BYPASS:
 		case IXGBE_DEV_ID_X550T:
 		case IXGBE_DEV_ID_X550T1:
 		case IXGBE_DEV_ID_X550EM_X_10G_T:
+		case IXGBE_DEV_ID_X550EM_A_10G_T:
+		case IXGBE_DEV_ID_X550EM_A_1G_T:
+		case IXGBE_DEV_ID_X550EM_A_1G_T_L:
 			supported = true;
 			break;
 		default:
@@ -196,9 +213,10 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
 		break;
 	}
 
-	ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
-		      "Device %x does not support flow control autoneg",
-		      hw->device_id);
+	if (!supported)
+		ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
+			      "Device %x does not support flow control autoneg",
+			      hw->device_id);
 	return supported;
 }
 
@@ -245,6 +263,7 @@ s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw)
 			goto out;
 
 		/* only backplane uses autoc so fall though */
+	case ixgbe_media_type_fiber_fixed:
 	case ixgbe_media_type_fiber_qsfp:
 	case ixgbe_media_type_fiber:
 		reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
@@ -370,6 +389,7 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 {
 	s32 ret_val;
 	u32 ctrl_ext;
+	u16 device_caps;
 
 	DEBUGFUNC("ixgbe_start_hw_generic");
 
@@ -392,14 +412,29 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 
 	/* Setup flow control */
 	ret_val = ixgbe_setup_fc(hw);
-	if (ret_val != IXGBE_SUCCESS)
-		goto out;
+	if (ret_val != IXGBE_SUCCESS && ret_val != IXGBE_NOT_IMPLEMENTED)
+		return ret_val;
+
+	/* Cache bit indicating need for crosstalk fix */
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		hw->mac.ops.get_device_caps(hw, &device_caps);
+		if (device_caps & IXGBE_DEVICE_CAPS_NO_CROSSTALK_WR)
+			hw->need_crosstalk_fix = false;
+		else
+			hw->need_crosstalk_fix = true;
+		break;
+	default:
+		hw->need_crosstalk_fix = false;
+		break;
+	}
 
 	/* Clear adapter stopped flag */
 	hw->adapter_stopped = false;
 
-out:
-	return ret_val;
+	return IXGBE_SUCCESS;
 }
 
 /**
@@ -1020,24 +1055,33 @@ s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw)
  *  ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
  *  @hw: pointer to the HW structure
  *
- *  Determines the LAN function id by reading memory-mapped registers
- *  and swaps the port value if requested.
+ *  Determines the LAN function id by reading memory-mapped registers and swaps
+ *  the port value if requested, and set MAC instance for devices that share
+ *  CS4227.
  **/
 void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw)
 {
 	struct ixgbe_bus_info *bus = &hw->bus;
 	u32 reg;
+	u16 ee_ctrl_4;
 
 	DEBUGFUNC("ixgbe_set_lan_id_multi_port_pcie");
 
 	reg = IXGBE_READ_REG(hw, IXGBE_STATUS);
 	bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT;
-	bus->lan_id = bus->func;
+	bus->lan_id = (u8)bus->func;
 
 	/* check for a port swap */
 	reg = IXGBE_READ_REG(hw, IXGBE_FACTPS_BY_MAC(hw));
 	if (reg & IXGBE_FACTPS_LFS)
 		bus->func ^= 0x1;
+
+	/* Get MAC instance from EEPROM for configuring CS4227 */
+	if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP) {
+		hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_4, &ee_ctrl_4);
+		bus->instance_id = (ee_ctrl_4 & IXGBE_EE_CTRL_4_INST_ID) >>
+				   IXGBE_EE_CTRL_4_INST_ID_SHIFT;
+	}
 }
 
 /**
@@ -1105,6 +1149,9 @@ s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index)
 
 	DEBUGFUNC("ixgbe_led_on_generic");
 
+	if (index > 3)
+		return IXGBE_ERR_PARAM;
+
 	/* To turn on the LED, set mode to ON. */
 	led_reg &= ~IXGBE_LED_MODE_MASK(index);
 	led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index);
@@ -1125,6 +1172,9 @@ s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index)
 
 	DEBUGFUNC("ixgbe_led_off_generic");
 
+	if (index > 3)
+		return IXGBE_ERR_PARAM;
+
 	/* To turn off the LED, set mode to OFF. */
 	led_reg &= ~IXGBE_LED_MODE_MASK(index);
 	led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index);
@@ -2397,10 +2447,11 @@ s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
 			  hw->mac.addr[4], hw->mac.addr[5]);
 
 		hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
-
-		/* clear VMDq pool/queue selection for RAR 0 */
-		hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL);
 	}
+
+	/* clear VMDq pool/queue selection for RAR 0 */
+	hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL);
+
 	hw->addr_ctrl.overflow_promisc = 0;
 
 	hw->addr_ctrl.rar_used_count = 1;
@@ -2729,7 +2780,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
 	}
 
 	/* Negotiate the fc mode to use */
-	ixgbe_fc_autoneg(hw);
+	hw->mac.ops.fc_autoneg(hw);
 
 	/* Disable any previous flow control settings */
 	mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
@@ -2839,8 +2890,8 @@ out:
  *  Find the intersection between advertised settings and link partner's
  *  advertised settings
  **/
-STATIC s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
-			      u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
+s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
+		       u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
 {
 	if ((!(adv_reg)) ||  (!(lp_reg))) {
 		ERROR_REPORT3(IXGBE_ERROR_UNSUPPORTED,
@@ -3020,6 +3071,7 @@ void ixgbe_fc_autoneg(struct ixgbe_hw *hw)
 
 	switch (hw->phy.media_type) {
 	/* Autoneg flow control on fiber adapters */
+	case ixgbe_media_type_fiber_fixed:
 	case ixgbe_media_type_fiber_qsfp:
 	case ixgbe_media_type_fiber:
 		if (speed == IXGBE_LINK_SPEED_1GB_FULL)
@@ -3312,7 +3364,7 @@ s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked)
  **/
 s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw)
 {
-	int secrxreg;
+	u32 secrxreg;
 
 	DEBUGFUNC("ixgbe_enable_sec_rx_path_generic");
 
@@ -3359,6 +3411,9 @@ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
 
 	DEBUGFUNC("ixgbe_blink_led_start_generic");
 
+	if (index > 3)
+		return IXGBE_ERR_PARAM;
+
 	/*
 	 * Link must be up to auto-blink the LEDs;
 	 * Force it if link is down.
@@ -3404,6 +3459,10 @@ s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
 
 	DEBUGFUNC("ixgbe_blink_led_stop_generic");
 
+	if (index > 3)
+		return IXGBE_ERR_PARAM;
+
+
 	ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
 	if (ret_val != IXGBE_SUCCESS)
 		goto out;
@@ -3799,68 +3858,65 @@ s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw)
  *  return the VLVF index where this VLAN id should be placed
  *
  **/
-s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan)
+s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan, bool vlvf_bypass)
 {
-	u32 bits = 0;
-	u32 first_empty_slot = 0;
-	s32 regindex;
+	s32 regindex, first_empty_slot;
+	u32 bits;
 
 	/* short cut the special case */
 	if (vlan == 0)
 		return 0;
 
-	/*
-	  * Search for the vlan id in the VLVF entries. Save off the first empty
-	  * slot found along the way
-	  */
-	for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) {
+	/* if vlvf_bypass is set we don't want to use an empty slot, we
+	 * will simply bypass the VLVF if there are no entries present in the
+	 * VLVF that contain our VLAN
+	 */
+	first_empty_slot = vlvf_bypass ? IXGBE_ERR_NO_SPACE : 0;
+
+	/* add VLAN enable bit for comparison */
+	vlan |= IXGBE_VLVF_VIEN;
+
+	/* Search for the vlan id in the VLVF entries. Save off the first empty
+	 * slot found along the way.
+	 *
+	 * pre-decrement loop covering (IXGBE_VLVF_ENTRIES - 1) .. 1
+	 */
+	for (regindex = IXGBE_VLVF_ENTRIES; --regindex;) {
 		bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex));
-		if (!bits && !(first_empty_slot))
+		if (bits == vlan)
+			return regindex;
+		if (!first_empty_slot && !bits)
 			first_empty_slot = regindex;
-		else if ((bits & 0x0FFF) == vlan)
-			break;
 	}
 
-	/*
-	  * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan
-	  * in the VLVF. Else use the first empty VLVF register for this
-	  * vlan id.
-	  */
-	if (regindex >= IXGBE_VLVF_ENTRIES) {
-		if (first_empty_slot)
-			regindex = first_empty_slot;
-		else {
-			ERROR_REPORT1(IXGBE_ERROR_SOFTWARE,
-				     "No space in VLVF.\n");
-			regindex = IXGBE_ERR_NO_SPACE;
-		}
-	}
+	/* If we are here then we didn't find the VLAN.  Return first empty
+	 * slot we found during our search, else error.
+	 */
+	if (!first_empty_slot)
+		ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "No space in VLVF.\n");
 
-	return regindex;
+	return first_empty_slot ? first_empty_slot : IXGBE_ERR_NO_SPACE;
 }
 
 /**
  *  ixgbe_set_vfta_generic - Set VLAN filter table
  *  @hw: pointer to hardware structure
  *  @vlan: VLAN id to write to VLAN filter
- *  @vind: VMDq output index that maps queue to VLAN id in VFVFB
- *  @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ *  @vind: VMDq output index that maps queue to VLAN id in VLVFB
+ *  @vlan_on: boolean flag to turn on/off VLAN
+ *  @vlvf_bypass: boolean flag indicating updating default pool is okay
  *
  *  Turn on/off specified VLAN in the VLAN filter table.
  **/
 s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
-			   bool vlan_on)
+			   bool vlan_on, bool vlvf_bypass)
 {
-	s32 regindex;
-	u32 bitindex;
-	u32 vfta;
-	u32 targetbit;
-	s32 ret_val = IXGBE_SUCCESS;
-	bool vfta_changed = false;
+	u32 regidx, vfta_delta, vfta;
+	s32 ret_val;
 
 	DEBUGFUNC("ixgbe_set_vfta_generic");
 
-	if (vlan > 4095)
+	if (vlan > 4095 || vind > 63)
 		return IXGBE_ERR_PARAM;
 
 	/*
@@ -3875,33 +3931,33 @@ s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
 	 *    bits[11-5]: which register
 	 *    bits[4-0]:  which bit in the register
 	 */
-	regindex = (vlan >> 5) & 0x7F;
-	bitindex = vlan & 0x1F;
-	targetbit = (1 << bitindex);
-	vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
-
-	if (vlan_on) {
-		if (!(vfta & targetbit)) {
-			vfta |= targetbit;
-			vfta_changed = true;
-		}
-	} else {
-		if ((vfta & targetbit)) {
-			vfta &= ~targetbit;
-			vfta_changed = true;
-		}
-	}
+	regidx = vlan / 32;
+	vfta_delta = 1 << (vlan % 32);
+	vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regidx));
+
+	/*
+	 * vfta_delta represents the difference between the current value
+	 * of vfta and the value we want in the register.  Since the diff
+	 * is an XOR mask we can just update the vfta using an XOR
+	 */
+	vfta_delta &= vlan_on ? ~vfta : vfta;
+	vfta ^= vfta_delta;
 
 	/* Part 2
 	 * Call ixgbe_set_vlvf_generic to set VLVFB and VLVF
 	 */
-	ret_val = ixgbe_set_vlvf_generic(hw, vlan, vind, vlan_on,
-					 &vfta_changed);
-	if (ret_val != IXGBE_SUCCESS)
+	ret_val = ixgbe_set_vlvf_generic(hw, vlan, vind, vlan_on, &vfta_delta,
+					 vfta, vlvf_bypass);
+	if (ret_val != IXGBE_SUCCESS) {
+		if (vlvf_bypass)
+			goto vfta_update;
 		return ret_val;
+	}
 
-	if (vfta_changed)
-		IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta);
+vfta_update:
+	/* Update VFTA now that we are ready for traffic */
+	if (vfta_delta)
+		IXGBE_WRITE_REG(hw, IXGBE_VFTA(regidx), vfta);
 
 	return IXGBE_SUCCESS;
 }
@@ -3910,21 +3966,25 @@ s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
  *  ixgbe_set_vlvf_generic - Set VLAN Pool Filter
  *  @hw: pointer to hardware structure
  *  @vlan: VLAN id to write to VLAN filter
- *  @vind: VMDq output index that maps queue to VLAN id in VFVFB
- *  @vlan_on: boolean flag to turn on/off VLAN in VFVF
- *  @vfta_changed: pointer to boolean flag which indicates whether VFTA
- *                 should be changed
+ *  @vind: VMDq output index that maps queue to VLAN id in VLVFB
+ *  @vlan_on: boolean flag to turn on/off VLAN in VLVF
+ *  @vfta_delta: pointer to the difference between the current value of VFTA
+ *		 and the desired value
+ *  @vfta: the desired value of the VFTA
+ *  @vlvf_bypass: boolean flag indicating updating default pool is okay
  *
  *  Turn on/off specified bit in VLVF table.
  **/
 s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
-			    bool vlan_on, bool *vfta_changed)
+			   bool vlan_on, u32 *vfta_delta, u32 vfta,
+			   bool vlvf_bypass)
 {
-	u32 vt;
+	u32 bits;
+	s32 vlvf_index;
 
 	DEBUGFUNC("ixgbe_set_vlvf_generic");
 
-	if (vlan > 4095)
+	if (vlan > 4095 || vind > 63)
 		return IXGBE_ERR_PARAM;
 
 	/* If VT Mode is set
@@ -3934,83 +3994,60 @@ s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
 	 *   Or !vlan_on
 	 *     clear the pool bit and possibly the vind
 	 */
-	vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
-	if (vt & IXGBE_VT_CTL_VT_ENABLE) {
-		s32 vlvf_index;
-		u32 bits;
-
-		vlvf_index = ixgbe_find_vlvf_slot(hw, vlan);
-		if (vlvf_index < 0)
-			return vlvf_index;
-
-		if (vlan_on) {
-			/* set the pool bit */
-			if (vind < 32) {
-				bits = IXGBE_READ_REG(hw,
-						IXGBE_VLVFB(vlvf_index * 2));
-				bits |= (1 << vind);
-				IXGBE_WRITE_REG(hw,
-						IXGBE_VLVFB(vlvf_index * 2),
-						bits);
-			} else {
-				bits = IXGBE_READ_REG(hw,
-					IXGBE_VLVFB((vlvf_index * 2) + 1));
-				bits |= (1 << (vind - 32));
-				IXGBE_WRITE_REG(hw,
-					IXGBE_VLVFB((vlvf_index * 2) + 1),
-					bits);
-			}
-		} else {
-			/* clear the pool bit */
-			if (vind < 32) {
-				bits = IXGBE_READ_REG(hw,
-						IXGBE_VLVFB(vlvf_index * 2));
-				bits &= ~(1 << vind);
-				IXGBE_WRITE_REG(hw,
-						IXGBE_VLVFB(vlvf_index * 2),
-						bits);
-				bits |= IXGBE_READ_REG(hw,
-					IXGBE_VLVFB((vlvf_index * 2) + 1));
-			} else {
-				bits = IXGBE_READ_REG(hw,
-					IXGBE_VLVFB((vlvf_index * 2) + 1));
-				bits &= ~(1 << (vind - 32));
-				IXGBE_WRITE_REG(hw,
-					IXGBE_VLVFB((vlvf_index * 2) + 1),
-					bits);
-				bits |= IXGBE_READ_REG(hw,
-						IXGBE_VLVFB(vlvf_index * 2));
-			}
-		}
+	if (!(IXGBE_READ_REG(hw, IXGBE_VT_CTL) & IXGBE_VT_CTL_VT_ENABLE))
+		return IXGBE_SUCCESS;
 
-		/*
-		 * If there are still bits set in the VLVFB registers
-		 * for the VLAN ID indicated we need to see if the
-		 * caller is requesting that we clear the VFTA entry bit.
-		 * If the caller has requested that we clear the VFTA
-		 * entry bit but there are still pools/VFs using this VLAN
-		 * ID entry then ignore the request.  We're not worried
-		 * about the case where we're turning the VFTA VLAN ID
-		 * entry bit on, only when requested to turn it off as
-		 * there may be multiple pools and/or VFs using the
-		 * VLAN ID entry.  In that case we cannot clear the
-		 * VFTA bit until all pools/VFs using that VLAN ID have also
-		 * been cleared.  This will be indicated by "bits" being
-		 * zero.
+	vlvf_index = ixgbe_find_vlvf_slot(hw, vlan, vlvf_bypass);
+	if (vlvf_index < 0)
+		return vlvf_index;
+
+	bits = IXGBE_READ_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + vind / 32));
+
+	/* set the pool bit */
+	bits |= 1 << (vind % 32);
+	if (vlan_on)
+		goto vlvf_update;
+
+	/* clear the pool bit */
+	bits ^= 1 << (vind % 32);
+
+	if (!bits &&
+	    !IXGBE_READ_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + 1 - vind / 32))) {
+		/* Clear VFTA first, then disable VLVF.  Otherwise
+		 * we run the risk of stray packets leaking into
+		 * the PF via the default pool
 		 */
-		if (bits) {
-			IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index),
-					(IXGBE_VLVF_VIEN | vlan));
-			if ((!vlan_on) && (vfta_changed != NULL)) {
-				/* someone wants to clear the vfta entry
-				 * but some pools/VFs are still using it.
-				 * Ignore it. */
-				*vfta_changed = false;
-			}
-		} else
-			IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0);
+		if (*vfta_delta)
+			IXGBE_WRITE_REG(hw, IXGBE_VFTA(vlan / 32), vfta);
+
+		/* disable VLVF and clear remaining bit from pool */
+		IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + vind / 32), 0);
+
+		return IXGBE_SUCCESS;
 	}
 
+	/* If there are still bits set in the VLVFB registers
+	 * for the VLAN ID indicated we need to see if the
+	 * caller is requesting that we clear the VFTA entry bit.
+	 * If the caller has requested that we clear the VFTA
+	 * entry bit but there are still pools/VFs using this VLAN
+	 * ID entry then ignore the request.  We're not worried
+	 * about the case where we're turning the VFTA VLAN ID
+	 * entry bit on, only when requested to turn it off as
+	 * there may be multiple pools and/or VFs using the
+	 * VLAN ID entry.  In that case we cannot clear the
+	 * VFTA bit until all pools/VFs using that VLAN ID have also
+	 * been cleared.  This will be indicated by "bits" being
+	 * zero.
+	 */
+	*vfta_delta = 0;
+
+vlvf_update:
+	/* record pool change and enable VLAN ID if not already enabled */
+	IXGBE_WRITE_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + vind / 32), bits);
+	IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), IXGBE_VLVF_VIEN | vlan);
+
 	return IXGBE_SUCCESS;
 }
 
@@ -4032,12 +4069,38 @@ s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw)
 	for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) {
 		IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0);
 		IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2), 0);
-		IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset * 2) + 1), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2 + 1), 0);
 	}
 
 	return IXGBE_SUCCESS;
 }
 
+/**
+ *  ixgbe_need_crosstalk_fix - Determine if we need to do cross talk fix
+ *  @hw: pointer to hardware structure
+ *
+ *  Contains the logic to identify if we need to verify link for the
+ *  crosstalk fix
+ **/
+static bool ixgbe_need_crosstalk_fix(struct ixgbe_hw *hw)
+{
+
+	/* Does FW say we need the fix */
+	if (!hw->need_crosstalk_fix)
+		return false;
+
+	/* Only consider SFP+ PHYs i.e. media type fiber */
+	switch (hw->mac.ops.get_media_type(hw)) {
+	case ixgbe_media_type_fiber:
+	case ixgbe_media_type_fiber_qsfp:
+		break;
+	default:
+		return false;
+	}
+
+	return true;
+}
+
 /**
  *  ixgbe_check_mac_link_generic - Determine link and speed status
  *  @hw: pointer to hardware structure
@@ -4055,6 +4118,35 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 
 	DEBUGFUNC("ixgbe_check_mac_link_generic");
 
+	/* If Crosstalk fix enabled do the sanity check of making sure
+	 * the SFP+ cage is full.
+	 */
+	if (ixgbe_need_crosstalk_fix(hw)) {
+		u32 sfp_cage_full;
+
+		switch (hw->mac.type) {
+		case ixgbe_mac_82599EB:
+			sfp_cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
+					IXGBE_ESDP_SDP2;
+			break;
+		case ixgbe_mac_X550EM_x:
+		case ixgbe_mac_X550EM_a:
+			sfp_cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
+					IXGBE_ESDP_SDP0;
+			break;
+		default:
+			/* sanity check - No SFP+ devices here */
+			sfp_cage_full = false;
+			break;
+		}
+
+		if (!sfp_cage_full) {
+			*link_up = false;
+			*speed = IXGBE_LINK_SPEED_UNKNOWN;
+			return IXGBE_SUCCESS;
+		}
+	}
+
 	/* clear the old state */
 	links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
 
@@ -4101,6 +4193,13 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 				*speed = IXGBE_LINK_SPEED_5GB_FULL;
 		}
 		break;
+	case IXGBE_LINKS_SPEED_10_X550EM_A:
+		*speed = IXGBE_LINK_SPEED_UNKNOWN;
+		if (hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T ||
+		    hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T_L) {
+			*speed = IXGBE_LINK_SPEED_10_FULL;
+		}
+		break;
 	default:
 		*speed = IXGBE_LINK_SPEED_UNKNOWN;
 	}
@@ -4218,43 +4317,25 @@ out:
 /**
  *  ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing
  *  @hw: pointer to hardware structure
- *  @enable: enable or disable switch for anti-spoofing
- *  @pf: Physical Function pool - do not enable anti-spoofing for the PF
+ *  @enable: enable or disable switch for MAC anti-spoofing
+ *  @vf: Virtual Function pool - VF Pool to set for MAC anti-spoofing
  *
  **/
-void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf)
+void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
 {
-	int j;
-	int pf_target_reg = pf >> 3;
-	int pf_target_shift = pf % 8;
-	u32 pfvfspoof = 0;
+	int vf_target_reg = vf >> 3;
+	int vf_target_shift = vf % 8;
+	u32 pfvfspoof;
 
 	if (hw->mac.type == ixgbe_mac_82598EB)
 		return;
 
+	pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
 	if (enable)
-		pfvfspoof = IXGBE_SPOOF_MACAS_MASK;
-
-	/*
-	 * PFVFSPOOF register array is size 8 with 8 bits assigned to
-	 * MAC anti-spoof enables in each register array element.
-	 */
-	for (j = 0; j < pf_target_reg; j++)
-		IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
-
-	/*
-	 * The PF should be allowed to spoof so that it can support
-	 * emulation mode NICs.  Do not set the bits assigned to the PF
-	 */
-	pfvfspoof &= (1 << pf_target_shift) - 1;
-	IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
-
-	/*
-	 * Remaining pools belong to the PF so they do not need to have
-	 * anti-spoofing enabled.
-	 */
-	for (j++; j < IXGBE_PFVFSPOOF_REG_COUNT; j++)
-		IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), 0);
+		pfvfspoof |= (1 << vf_target_shift);
+	else
+		pfvfspoof &= ~(1 << vf_target_shift);
+	IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
 }
 
 /**
@@ -4350,49 +4431,45 @@ u8 ixgbe_calculate_checksum(u8 *buffer, u32 length)
 }
 
 /**
- *  ixgbe_host_interface_command - Issue command to manageability block
+ *  ixgbe_hic_unlocked - Issue command to manageability block unlocked
  *  @hw: pointer to the HW structure
- *  @buffer: contains the command to write and where the return status will
- *   be placed
+ *  @buffer: command to write and where the return status will be placed
  *  @length: length of buffer, must be multiple of 4 bytes
  *  @timeout: time in ms to wait for command completion
- *  @return_data: read and return data from the buffer (true) or not (false)
- *   Needed because FW structures are big endian and decoding of
- *   these fields can be 8 bit or 16 bit based on command. Decoding
- *   is not easily understood without making a table of commands.
- *   So we will leave this up to the caller to read back the data
- *   in these cases.
  *
- *  Communicates with the manageability block.  On success return IXGBE_SUCCESS
- *  else return IXGBE_ERR_HOST_INTERFACE_COMMAND.
+ *  Communicates with the manageability block. On success return IXGBE_SUCCESS
+ *  else returns semaphore error when encountering an error acquiring
+ *  semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ *
+ *  This function assumes that the IXGBE_GSSR_SW_MNG_SM semaphore is held
+ *  by the caller.
  **/
-s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
-				 u32 length, u32 timeout, bool return_data)
+s32 ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length,
+		       u32 timeout)
 {
-	u32 hicr, i, bi, fwsts;
-	u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
-	u16 buf_len;
+	u32 hicr, i, fwsts;
 	u16 dword_len;
 
-	DEBUGFUNC("ixgbe_host_interface_command");
+	DEBUGFUNC("ixgbe_hic_unlocked");
 
-	if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+	if (!length || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
 		DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
 		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
 	}
+
 	/* Set bit 9 of FWSTS clearing FW reset indication */
 	fwsts = IXGBE_READ_REG(hw, IXGBE_FWSTS);
 	IXGBE_WRITE_REG(hw, IXGBE_FWSTS, fwsts | IXGBE_FWSTS_FWRI);
 
 	/* Check that the host interface is enabled. */
 	hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
-	if ((hicr & IXGBE_HICR_EN) == 0) {
+	if (!(hicr & IXGBE_HICR_EN)) {
 		DEBUGOUT("IXGBE_HOST_EN bit disabled.\n");
 		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
 	}
 
 	/* Calculate length in DWORDs. We must be DWORD aligned */
-	if ((length % (sizeof(u32))) != 0) {
+	if (length % sizeof(u32)) {
 		DEBUGOUT("Buffer length failure, not aligned to dword");
 		return IXGBE_ERR_INVALID_ARGUMENT;
 	}
@@ -4417,15 +4494,61 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
 	}
 
 	/* Check command completion */
-	if ((timeout != 0 && i == timeout) ||
+	if ((timeout && i == timeout) ||
 	    !(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV)) {
 		ERROR_REPORT1(IXGBE_ERROR_CAUTION,
 			     "Command has failed with no status valid.\n");
 		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
 	}
 
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_host_interface_command - Issue command to manageability block
+ *  @hw: pointer to the HW structure
+ *  @buffer: contains the command to write and where the return status will
+ *   be placed
+ *  @length: length of buffer, must be multiple of 4 bytes
+ *  @timeout: time in ms to wait for command completion
+ *  @return_data: read and return data from the buffer (true) or not (false)
+ *   Needed because FW structures are big endian and decoding of
+ *   these fields can be 8 bit or 16 bit based on command. Decoding
+ *   is not easily understood without making a table of commands.
+ *   So we will leave this up to the caller to read back the data
+ *   in these cases.
+ *
+ *  Communicates with the manageability block. On success return IXGBE_SUCCESS
+ *  else returns semaphore error when encountering an error acquiring
+ *  semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ **/
+s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
+				 u32 length, u32 timeout, bool return_data)
+{
+	u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
+	u16 dword_len;
+	u16 buf_len;
+	s32 status;
+	u32 bi;
+
+	DEBUGFUNC("ixgbe_host_interface_command");
+
+	if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+		DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
+		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Take management host interface semaphore */
+	status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
+	if (status)
+		return status;
+
+	status = ixgbe_hic_unlocked(hw, buffer, length, timeout);
+	if (status)
+		goto rel_out;
+
 	if (!return_data)
-		return 0;
+		goto rel_out;
 
 	/* Calculate length in DWORDs */
 	dword_len = hdr_size >> 2;
@@ -4433,17 +4556,18 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
 	/* first pull in the header so we know the buffer length */
 	for (bi = 0; bi < dword_len; bi++) {
 		buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
-		IXGBE_LE32_TO_CPUS(&buffer[bi]);
+		IXGBE_LE32_TO_CPUS((uintptr_t)&buffer[bi]);
 	}
 
 	/* If there is any thing in data position pull it in */
 	buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len;
-	if (buf_len == 0)
-		return 0;
+	if (!buf_len)
+		goto rel_out;
 
 	if (length < buf_len + hdr_size) {
 		DEBUGOUT("Buffer not large enough for reply message.\n");
-		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+		status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+		goto rel_out;
 	}
 
 	/* Calculate length in DWORDs, add 3 for odd lengths */
@@ -4452,10 +4576,13 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
 	/* Pull in the rest of the buffer (bi is where we left off) */
 	for (; bi <= dword_len; bi++) {
 		buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
-		IXGBE_LE32_TO_CPUS(&buffer[bi]);
+		IXGBE_LE32_TO_CPUS((uintptr_t)&buffer[bi]);
 	}
 
-	return 0;
+rel_out:
+	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
+
+	return status;
 }
 
 /**
@@ -4480,12 +4607,6 @@ s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
 
 	DEBUGFUNC("ixgbe_set_fw_drv_ver_generic");
 
-	if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM)
-	    != IXGBE_SUCCESS) {
-		ret_val = IXGBE_ERR_SWFW_SYNC;
-		goto out;
-	}
-
 	fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
 	fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN;
 	fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
@@ -4517,8 +4638,6 @@ s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
 		break;
 	}
 
-	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
-out:
 	return ret_val;
 }
 
@@ -4948,16 +5067,9 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 		speedcnt++;
 		highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
 
-		/* If we already have link at this speed, just jump out */
-		status = ixgbe_check_link(hw, &link_speed, &link_up, false);
-		if (status != IXGBE_SUCCESS)
-			return status;
-
-		if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
-			goto out;
-
 		/* Set the module link speed */
 		switch (hw->phy.media_type) {
+		case ixgbe_media_type_fiber_fixed:
 		case ixgbe_media_type_fiber:
 			ixgbe_set_rate_select_speed(hw,
 						    IXGBE_LINK_SPEED_10GB_FULL);
@@ -5006,16 +5118,9 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 		if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
 			highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
 
-		/* If we already have link at this speed, just jump out */
-		status = ixgbe_check_link(hw, &link_speed, &link_up, false);
-		if (status != IXGBE_SUCCESS)
-			return status;
-
-		if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
-			goto out;
-
 		/* Set the module link speed */
 		switch (hw->phy.media_type) {
+		case ixgbe_media_type_fiber_fixed:
 		case ixgbe_media_type_fiber:
 			ixgbe_set_rate_select_speed(hw,
 						    IXGBE_LINK_SPEED_1GB_FULL);