X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=drivers%2Fnet%2Fixgbe%2Fbase%2Fixgbe_phy.c;h=2df068ee3063bbb47f414777b71dc93b157345e8;hb=9aa8c7c855a82db086c866d7c1c5d49bfaffef0c;hp=62c3080a6a2d17278a29018d41f079780c13e2ba;hpb=169a9de21e263aa6599cdc2d87a45ae158d9f509;p=deb_dpdk.git

diff --git a/drivers/net/ixgbe/base/ixgbe_phy.c b/drivers/net/ixgbe/base/ixgbe_phy.c
index 62c3080a..2df068ee 100644
--- a/drivers/net/ixgbe/base/ixgbe_phy.c
+++ b/drivers/net/ixgbe/base/ixgbe_phy.c
@@ -86,8 +86,8 @@ STATIC s32 ixgbe_in_i2c_byte_ack(struct ixgbe_hw *hw, u8 *byte)
 
 /**
  * ixgbe_ones_comp_byte_add - Perform one's complement addition
- * @add1 - addend 1
- * @add2 - addend 2
+ * @add1: addend 1
+ * @add2: addend 2
  *
  * Returns one's complement 8-bit sum.
  */
@@ -398,6 +398,7 @@ s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw)
 /**
  *  ixgbe_validate_phy_addr - Determines phy address is valid
  *  @hw: pointer to hardware structure
+ *  @phy_addr: PHY address
  *
  **/
 bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
@@ -575,6 +576,7 @@ out:
  *  the SWFW lock
  *  @hw: pointer to hardware structure
  *  @reg_addr: 32 bit address of PHY register to read
+ *  @device_type: 5 bit device type
  *  @phy_data: Pointer to read data from PHY register
  **/
 s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
@@ -656,6 +658,7 @@ s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
  *  using the SWFW lock - this function is needed in most cases
  *  @hw: pointer to hardware structure
  *  @reg_addr: 32 bit address of PHY register to read
+ *  @device_type: 5 bit device type
  *  @phy_data: Pointer to read data from PHY register
  **/
 s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
@@ -872,6 +875,7 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
  *  ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
  *  @hw: pointer to hardware structure
  *  @speed: new link speed
+ *  @autoneg_wait_to_complete: unused
  **/
 s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
 				       ixgbe_link_speed speed,
@@ -977,6 +981,8 @@ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
 /**
  *  ixgbe_check_phy_link_tnx - Determine link and speed status
  *  @hw: pointer to hardware structure
+ *  @speed: current link speed
+ *  @link_up: true is link is up, false otherwise
  *
  *  Reads the VS1 register to determine if link is up and the current speed for
  *  the PHY.
@@ -1941,7 +1947,7 @@ s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset at address 0xA2
- *  @eeprom_data: value read
+ *  @sff8472_data: value read
  *
  *  Performs byte read operation to SFP module's SFF-8472 data over I2C
  **/
@@ -1990,6 +1996,7 @@ STATIC bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr)
  *  ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to read
+ *  @dev_addr: address to read from
  *  @data: value read
  *  @lock: true if to take and release semaphore
  *
@@ -2081,6 +2088,7 @@ fail:
  *  ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to read
+ *  @dev_addr: address to read from
  *  @data: value read
  *
  *  Performs byte read operation to SFP module's EEPROM over I2C interface at
@@ -2097,6 +2105,7 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to read
+ *  @dev_addr: address to read from
  *  @data: value read
  *
  *  Performs byte read operation to SFP module's EEPROM over I2C interface at
@@ -2113,6 +2122,7 @@ s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to write
+ *  @dev_addr: address to write to
  *  @data: value to write
  *  @lock: true if to take and release semaphore
  *
@@ -2184,6 +2194,7 @@ fail:
  *  ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to write
+ *  @dev_addr: address to write to
  *  @data: value to write
  *
  *  Performs byte write operation to SFP module's EEPROM over I2C interface at
@@ -2200,6 +2211,7 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
  *  ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C
  *  @hw: pointer to hardware structure
  *  @byte_offset: byte offset to write
+ *  @dev_addr: address to write to
  *  @data: value to write
  *
  *  Performs byte write operation to SFP module's EEPROM over I2C interface at
@@ -2582,6 +2594,7 @@ STATIC bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl)
 {
 	u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
 	bool data;
+	UNREFERENCED_1PARAMETER(hw);
 
 	DEBUGFUNC("ixgbe_get_i2c_data");