X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=drivers%2Fnet%2Fqede%2Fbase%2Fecore_l2_api.h;h=8cbe8dde651d8e0ff4cb0be4bfabf52cac8b5904;hb=refs%2Fchanges%2F08%2F13108%2F1;hp=326fa45b2bb102a3c923722645686f978e0e7e3b;hpb=6b3e017e5d25f15da73f7700f7f2ac553ef1a2e9;p=deb_dpdk.git diff --git a/drivers/net/qede/base/ecore_l2_api.h b/drivers/net/qede/base/ecore_l2_api.h index 326fa45b..8cbe8dde 100644 --- a/drivers/net/qede/base/ecore_l2_api.h +++ b/drivers/net/qede/base/ecore_l2_api.h @@ -11,6 +11,7 @@ #include "ecore_status.h" #include "ecore_sp_api.h" +#include "ecore_int_api.h" #ifndef __EXTRACT__LINUX__ enum ecore_rss_caps { @@ -28,15 +29,25 @@ enum ecore_rss_caps { #endif struct ecore_queue_start_common_params { - /* Rx/Tx queue id */ - u8 queue_id; + /* Should always be relative to entity sending this. */ u8 vport_id; + u16 queue_id; - /* stats_id is relative or absolute depends on function */ + /* Relative, but relevant only for PFs */ u8 stats_id; - u16 sb; - u16 sb_idx; - u16 vf_qid; + + struct ecore_sb_info *p_sb; + u8 sb_idx; +}; + +struct ecore_rxq_start_ret_params { + void OSAL_IOMEM *p_prod; + void *p_handle; +}; + +struct ecore_txq_start_ret_params { + void OSAL_IOMEM *p_doorbell; + void *p_handle; }; struct ecore_rss_params { @@ -48,7 +59,9 @@ struct ecore_rss_params { u8 update_rss_key; u8 rss_caps; u8 rss_table_size_log; /* The table size is 2 ^ rss_table_size_log */ - u16 rss_ind_table[ECORE_RSS_IND_TABLE_SIZE]; + + /* Indirection table consist of rx queue handles */ + void *rss_ind_table[ECORE_RSS_IND_TABLE_SIZE]; u32 rss_key[ECORE_RSS_KEY_SIZE]; }; @@ -89,6 +102,7 @@ enum ecore_filter_ucast_type { ECORE_FILTER_INNER_MAC_VNI_PAIR, ECORE_FILTER_MAC_VNI_PAIR, ECORE_FILTER_VNI, + ECORE_FILTER_UNUSED, /* @DPDK */ }; struct ecore_filter_ucast { @@ -127,6 +141,14 @@ struct ecore_filter_accept_flags { #define ECORE_ACCEPT_BCAST 0x20 }; +struct ecore_arfs_config_params { + bool tcp; + bool udp; + bool ipv4; + bool ipv6; + bool arfs_enable; /* Enable or disable arfs mode */ +}; + /* Add / remove / move / remove-all unicast MAC-VLAN filters. * FW will assert in the following cases, so driver should take care...: * 1. Adding a filter to a full table. @@ -159,42 +181,37 @@ ecore_filter_accept_cmd( struct ecore_spq_comp_cb *p_comp_data); /** - * @brief ecore_sp_eth_rx_queue_start - RX Queue Start Ramrod + * @brief ecore_eth_rx_queue_start - RX Queue Start Ramrod * * This ramrod initializes an RX Queue for a VPort. An Assert is generated if * the VPort ID is not currently initialized. * * @param p_hwfn * @param opaque_fid - * @p_params [stats_id is relative, packed in p_params] + * @p_params Inputs; Relative for PF [SB being an exception] * @param bd_max_bytes Maximum bytes that can be placed on a BD * @param bd_chain_phys_addr Physical address of BDs for receive. * @param cqe_pbl_addr Physical address of the CQE PBL Table. * @param cqe_pbl_size Size of the CQE PBL Table - * @param pp_prod Pointer to place producer's - * address for the Rx Q (May be - * NULL). + * @param p_ret_params Pointed struct to be filled with outputs. * * @return enum _ecore_status_t */ enum _ecore_status_t -ecore_sp_eth_rx_queue_start(struct ecore_hwfn *p_hwfn, - u16 opaque_fid, - struct ecore_queue_start_common_params *p_params, - u16 bd_max_bytes, - dma_addr_t bd_chain_phys_addr, - dma_addr_t cqe_pbl_addr, - u16 cqe_pbl_size, - void OSAL_IOMEM * *pp_prod); +ecore_eth_rx_queue_start(struct ecore_hwfn *p_hwfn, + u16 opaque_fid, + struct ecore_queue_start_common_params *p_params, + u16 bd_max_bytes, + dma_addr_t bd_chain_phys_addr, + dma_addr_t cqe_pbl_addr, + u16 cqe_pbl_size, + struct ecore_rxq_start_ret_params *p_ret_params); /** - * @brief ecore_sp_eth_rx_queue_stop - - * - * This ramrod closes an RX queue. It sends RX queue stop ramrod - * + CFC delete ramrod + * @brief ecore_eth_rx_queue_stop - This ramrod closes an Rx queue * * @param p_hwfn - * @param rx_queue_id RX Queue ID + * @param p_rxq Handler of queue to close * @param eq_completion_only If True completion will be on * EQe, if False completion will be * on EQe if p_hwfn opaque @@ -205,13 +222,13 @@ ecore_sp_eth_rx_queue_start(struct ecore_hwfn *p_hwfn, * @return enum _ecore_status_t */ enum _ecore_status_t -ecore_sp_eth_rx_queue_stop(struct ecore_hwfn *p_hwfn, - u16 rx_queue_id, - bool eq_completion_only, - bool cqe_completion); +ecore_eth_rx_queue_stop(struct ecore_hwfn *p_hwfn, + void *p_rxq, + bool eq_completion_only, + bool cqe_completion); /** - * @brief ecore_sp_eth_tx_queue_start - TX Queue Start Ramrod + * @brief - TX Queue Start Ramrod * * This ramrod initializes a TX Queue for a VPort. An Assert is generated if * the VPort is not currently initialized. @@ -222,34 +239,29 @@ ecore_sp_eth_rx_queue_stop(struct ecore_hwfn *p_hwfn, * @param tc traffic class to use with this L2 txq * @param pbl_addr address of the pbl array * @param pbl_size number of entries in pbl - * @param pp_doorbell Pointer to place doorbell pointer (May be NULL). - * This address should be used with the - * DIRECT_REG_WR macro. + * @param p_ret_params Pointer to fill the return parameters in. * * @return enum _ecore_status_t */ enum _ecore_status_t -ecore_sp_eth_tx_queue_start(struct ecore_hwfn *p_hwfn, - u16 opaque_fid, - struct ecore_queue_start_common_params *p_params, - u8 tc, - dma_addr_t pbl_addr, - u16 pbl_size, - void OSAL_IOMEM * *pp_doorbell); +ecore_eth_tx_queue_start(struct ecore_hwfn *p_hwfn, + u16 opaque_fid, + struct ecore_queue_start_common_params *p_params, + u8 tc, + dma_addr_t pbl_addr, + u16 pbl_size, + struct ecore_txq_start_ret_params *p_ret_params); /** - * @brief ecore_sp_eth_tx_queue_stop - - * - * This ramrod closes a TX queue. It sends TX queue stop ramrod - * + CFC delete ramrod + * @brief ecore_eth_tx_queue_stop - closes a Tx queue * * @param p_hwfn - * @param tx_queue_id TX Queue ID + * @param p_txq - handle to Tx queue needed to be closed * * @return enum _ecore_status_t */ -enum _ecore_status_t ecore_sp_eth_tx_queue_stop(struct ecore_hwfn *p_hwfn, - u16 tx_queue_id); +enum _ecore_status_t ecore_eth_tx_queue_stop(struct ecore_hwfn *p_hwfn, + void *p_txq); enum ecore_tpa_mode { ECORE_TPA_MODE_NONE, @@ -273,6 +285,15 @@ struct ecore_sp_vport_start_params { bool zero_placement_offset; bool check_mac; bool check_ethtype; + + /* Strict behavior on transmission errors */ + bool b_err_illegal_vlan_mode; + bool b_err_illegal_inband_mode; + bool b_err_vlan_insert_with_inband; + bool b_err_small_pkt; + bool b_err_big_pkt; + bool b_err_anti_spoof; + bool b_err_ctrl_frame; }; /** @@ -311,7 +332,7 @@ struct ecore_sp_vport_update_params { u8 anti_spoofing_en; u8 update_accept_any_vlan_flg; u8 accept_any_vlan; - unsigned long bins[8]; + u32 bins[8]; struct ecore_rss_params *rss_params; struct ecore_filter_accept_flags accept_flags; struct ecore_sge_tpa_params *sge_tpa_params; @@ -372,19 +393,19 @@ ecore_sp_eth_filter_ucast(struct ecore_hwfn *p_hwfn, * @note Final phase API. * * @param p_hwfn - * @param rx_queue_id RX Queue ID - * @param num_rxqs Allow to update multiple rx - * queues, from rx_queue_id to - * (rx_queue_id + num_rxqs) + * @param pp_rxq_handlers An array of queue handlers to be updated. + * @param num_rxqs number of queues to update. * @param complete_cqe_flg Post completion to the CQE Ring if set * @param complete_event_flg Post completion to the Event Ring if set + * @param comp_mode + * @param p_comp_data * * @return enum _ecore_status_t */ enum _ecore_status_t ecore_sp_eth_rx_queues_update(struct ecore_hwfn *p_hwfn, - u16 rx_queue_id, + void **pp_rxq_handlers, u8 num_rxqs, u8 complete_cqe_flg, u8 complete_event_flg, @@ -401,4 +422,44 @@ void ecore_get_vport_stats(struct ecore_dev *p_dev, void ecore_reset_vport_stats(struct ecore_dev *p_dev); +/** + *@brief ecore_arfs_mode_configure - + * + *Enable or disable rfs mode. It must accept atleast one of tcp or udp true + *and atleast one of ipv4 or ipv6 true to enable rfs mode. + * + *@param p_hwfn + *@param p_ptt + *@param p_cfg_params arfs mode configuration parameters. + * + */ +void ecore_arfs_mode_configure(struct ecore_hwfn *p_hwfn, + struct ecore_ptt *p_ptt, + struct ecore_arfs_config_params *p_cfg_params); + +/** + * @brief - ecore_configure_rfs_ntuple_filter + * + * This ramrod should be used to add or remove arfs hw filter + * + * @params p_hwfn + * @params p_cb Used for ECORE_SPQ_MODE_CB,where client would initialize + * it with cookie and callback function address, if not + * using this mode then client must pass NULL. + * @params p_addr p_addr is an actual packet header that needs to be + * filter. It has to mapped with IO to read prior to + * calling this, [contains 4 tuples- src ip, dest ip, + * src port, dest port]. + * @params length length of p_addr header up to past the transport header. + * @params qid receive packet will be directed to this queue. + * @params vport_id + * @params b_is_add flag to add or remove filter. + * + */ +enum _ecore_status_t +ecore_configure_rfs_ntuple_filter(struct ecore_hwfn *p_hwfn, + struct ecore_spq_comp_cb *p_cb, + dma_addr_t p_addr, u16 length, + u16 qid, u8 vport_id, + bool b_is_add); #endif