X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=drivers%2Fnet%2Fqede%2Fqede_ethdev.c;h=4a5e4857964b4fc07d69e9c71522345f9b5e0a2d;hb=6e7cbd63706f3435b9d9a2057a37db1da01db9a7;hp=73764e9a81ed4bcbf01a1d3b8754bab996cb0080;hpb=c3f15def2ebe9cc255cf0e5cf32aa171f5b4326d;p=deb_dpdk.git diff --git a/drivers/net/qede/qede_ethdev.c b/drivers/net/qede/qede_ethdev.c index 73764e9a..4a5e4857 100644 --- a/drivers/net/qede/qede_ethdev.c +++ b/drivers/net/qede/qede_ethdev.c @@ -335,6 +335,24 @@ static void qede_interrupt_action(struct ecore_hwfn *p_hwfn) ecore_int_sp_dpc((osal_int_ptr_t)(p_hwfn)); } +static void +qede_interrupt_handler_intx(void *param) +{ + struct rte_eth_dev *eth_dev = (struct rte_eth_dev *)param; + struct qede_dev *qdev = eth_dev->data->dev_private; + struct ecore_dev *edev = &qdev->edev; + u64 status; + + /* Check if our device actually raised an interrupt */ + status = ecore_int_igu_read_sisr_reg(ECORE_LEADING_HWFN(edev)); + if (status & 0x1) { + qede_interrupt_action(ECORE_LEADING_HWFN(edev)); + + if (rte_intr_enable(eth_dev->intr_handle)) + DP_ERR(edev, "rte_intr_enable failed\n"); + } +} + static void qede_interrupt_handler(void *param) { @@ -443,55 +461,59 @@ static void qede_reset_queue_stats(struct qede_dev *qdev, bool xstats) } static int -qede_start_vport(struct qede_dev *qdev, uint16_t mtu) +qede_stop_vport(struct ecore_dev *edev) { - struct ecore_dev *edev = QEDE_INIT_EDEV(qdev); - struct ecore_sp_vport_start_params params; struct ecore_hwfn *p_hwfn; + uint8_t vport_id; int rc; int i; - memset(¶ms, 0, sizeof(params)); - params.vport_id = 0; - params.mtu = mtu; - /* @DPDK - Disable FW placement */ - params.zero_placement_offset = 1; + vport_id = 0; for_each_hwfn(edev, i) { p_hwfn = &edev->hwfns[i]; - params.concrete_fid = p_hwfn->hw_info.concrete_fid; - params.opaque_fid = p_hwfn->hw_info.opaque_fid; - rc = ecore_sp_vport_start(p_hwfn, ¶ms); + rc = ecore_sp_vport_stop(p_hwfn, p_hwfn->hw_info.opaque_fid, + vport_id); if (rc != ECORE_SUCCESS) { - DP_ERR(edev, "Start V-PORT failed %d\n", rc); + DP_ERR(edev, "Stop V-PORT failed rc = %d\n", rc); return rc; } } - ecore_reset_vport_stats(edev); - if (IS_PF(edev)) - qede_reset_queue_stats(qdev, true); - DP_INFO(edev, "VPORT started with MTU = %u\n", mtu); + + DP_INFO(edev, "vport stopped\n"); return 0; } static int -qede_stop_vport(struct ecore_dev *edev) +qede_start_vport(struct qede_dev *qdev, uint16_t mtu) { + struct ecore_dev *edev = QEDE_INIT_EDEV(qdev); + struct ecore_sp_vport_start_params params; struct ecore_hwfn *p_hwfn; - uint8_t vport_id; int rc; int i; - vport_id = 0; + if (qdev->vport_started) + qede_stop_vport(edev); + + memset(¶ms, 0, sizeof(params)); + params.vport_id = 0; + params.mtu = mtu; + /* @DPDK - Disable FW placement */ + params.zero_placement_offset = 1; for_each_hwfn(edev, i) { p_hwfn = &edev->hwfns[i]; - rc = ecore_sp_vport_stop(p_hwfn, p_hwfn->hw_info.opaque_fid, - vport_id); + params.concrete_fid = p_hwfn->hw_info.concrete_fid; + params.opaque_fid = p_hwfn->hw_info.opaque_fid; + rc = ecore_sp_vport_start(p_hwfn, ¶ms); if (rc != ECORE_SUCCESS) { - DP_ERR(edev, "Stop V-PORT failed rc = %d\n", rc); + DP_ERR(edev, "Start V-PORT failed %d\n", rc); return rc; } } + ecore_reset_vport_stats(edev); + qdev->vport_started = true; + DP_INFO(edev, "VPORT started with MTU = %u\n", mtu); return 0; } @@ -512,12 +534,9 @@ int qede_activate_vport(struct rte_eth_dev *eth_dev, bool flg) params.update_vport_active_tx_flg = 1; params.vport_active_rx_flg = flg; params.vport_active_tx_flg = flg; - if (!qdev->enable_tx_switching) { - if (IS_VF(edev)) { - params.update_tx_switching_flg = 1; - params.tx_switching_flg = !flg; - DP_INFO(edev, "VF tx-switching is disabled\n"); - } + if (~qdev->enable_tx_switching & flg) { + params.update_tx_switching_flg = 1; + params.tx_switching_flg = !flg; } for_each_hwfn(edev, i) { p_hwfn = &edev->hwfns[i]; @@ -593,37 +612,6 @@ int qede_enable_tpa(struct rte_eth_dev *eth_dev, bool flg) return 0; } -/* Update MTU via vport-update without doing port restart. - * The vport must be deactivated before calling this API. - */ -int qede_update_mtu(struct rte_eth_dev *eth_dev, uint16_t mtu) -{ - struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev); - struct ecore_dev *edev = QEDE_INIT_EDEV(qdev); - struct ecore_sp_vport_update_params params; - struct ecore_hwfn *p_hwfn; - int rc; - int i; - - memset(¶ms, 0, sizeof(struct ecore_sp_vport_update_params)); - params.vport_id = 0; - params.mtu = mtu; - params.vport_id = 0; - for_each_hwfn(edev, i) { - p_hwfn = &edev->hwfns[i]; - params.opaque_fid = p_hwfn->hw_info.opaque_fid; - rc = ecore_sp_vport_update(p_hwfn, ¶ms, - ECORE_SPQ_MODE_EBLOCK, NULL); - if (rc != ECORE_SUCCESS) { - DP_ERR(edev, "Failed to update MTU\n"); - return -1; - } - } - DP_INFO(edev, "MTU updated to %u\n", mtu); - - return 0; -} - static void qede_set_ucast_cmn_params(struct ecore_filter_ucast *ucast) { memset(ucast, 0, sizeof(struct ecore_filter_ucast)); @@ -735,10 +723,10 @@ qede_ucast_filter(struct rte_eth_dev *eth_dev, struct ecore_filter_ucast *ucast, ETHER_ADDR_LEN) == 0) && ucast->vni == tmp->vni && ucast->vlan == tmp->vlan) { - DP_ERR(edev, "Unicast MAC is already added" - " with vlan = %u, vni = %u\n", - ucast->vlan, ucast->vni); - return -EEXIST; + DP_INFO(edev, "Unicast MAC is already added" + " with vlan = %u, vni = %u\n", + ucast->vlan, ucast->vni); + return 0; } } u = rte_malloc(NULL, sizeof(struct qede_ucast_entry), @@ -772,47 +760,69 @@ qede_ucast_filter(struct rte_eth_dev *eth_dev, struct ecore_filter_ucast *ucast, } static int -qede_mcast_filter(struct rte_eth_dev *eth_dev, struct ecore_filter_ucast *mcast, - bool add) +qede_add_mcast_filters(struct rte_eth_dev *eth_dev, struct ether_addr *mc_addrs, + uint32_t mc_addrs_num) { struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev); struct ecore_dev *edev = QEDE_INIT_EDEV(qdev); - struct ether_addr *mac_addr; - struct qede_mcast_entry *tmp = NULL; - struct qede_mcast_entry *m; + struct ecore_filter_mcast mcast; + struct qede_mcast_entry *m = NULL; + uint8_t i; + int rc; - mac_addr = (struct ether_addr *)mcast->mac; - if (add) { - SLIST_FOREACH(tmp, &qdev->mc_list_head, list) { - if (memcmp(mac_addr, &tmp->mac, ETHER_ADDR_LEN) == 0) { - DP_ERR(edev, - "Multicast MAC is already added\n"); - return -EEXIST; - } - } + for (i = 0; i < mc_addrs_num; i++) { m = rte_malloc(NULL, sizeof(struct qede_mcast_entry), - RTE_CACHE_LINE_SIZE); + RTE_CACHE_LINE_SIZE); if (!m) { - DP_ERR(edev, - "Did not allocate memory for mcast\n"); + DP_ERR(edev, "Did not allocate memory for mcast\n"); return -ENOMEM; } - ether_addr_copy(mac_addr, &m->mac); + ether_addr_copy(&mc_addrs[i], &m->mac); SLIST_INSERT_HEAD(&qdev->mc_list_head, m, list); - qdev->num_mc_addr++; - } else { - SLIST_FOREACH(tmp, &qdev->mc_list_head, list) { - if (memcmp(mac_addr, &tmp->mac, ETHER_ADDR_LEN) == 0) - break; - } - if (tmp == NULL) { - DP_INFO(edev, "Multicast mac is not found\n"); - return -EINVAL; - } - SLIST_REMOVE(&qdev->mc_list_head, tmp, - qede_mcast_entry, list); - qdev->num_mc_addr--; } + memset(&mcast, 0, sizeof(mcast)); + mcast.num_mc_addrs = mc_addrs_num; + mcast.opcode = ECORE_FILTER_ADD; + for (i = 0; i < mc_addrs_num; i++) + ether_addr_copy(&mc_addrs[i], (struct ether_addr *) + &mcast.mac[i]); + rc = ecore_filter_mcast_cmd(edev, &mcast, ECORE_SPQ_MODE_CB, NULL); + if (rc != ECORE_SUCCESS) { + DP_ERR(edev, "Failed to add multicast filter (rc = %d\n)", rc); + return -1; + } + + return 0; +} + +static int qede_del_mcast_filters(struct rte_eth_dev *eth_dev) +{ + struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev); + struct ecore_dev *edev = QEDE_INIT_EDEV(qdev); + struct qede_mcast_entry *tmp = NULL; + struct ecore_filter_mcast mcast; + int j; + int rc; + + memset(&mcast, 0, sizeof(mcast)); + mcast.num_mc_addrs = qdev->num_mc_addr; + mcast.opcode = ECORE_FILTER_REMOVE; + j = 0; + SLIST_FOREACH(tmp, &qdev->mc_list_head, list) { + ether_addr_copy(&tmp->mac, (struct ether_addr *)&mcast.mac[j]); + j++; + } + rc = ecore_filter_mcast_cmd(edev, &mcast, ECORE_SPQ_MODE_CB, NULL); + if (rc != ECORE_SUCCESS) { + DP_ERR(edev, "Failed to delete multicast filter\n"); + return -1; + } + /* Init the list */ + while (!SLIST_EMPTY(&qdev->mc_list_head)) { + tmp = SLIST_FIRST(&qdev->mc_list_head); + SLIST_REMOVE_HEAD(&qdev->mc_list_head, list); + } + SLIST_INIT(&qdev->mc_list_head); return 0; } @@ -823,59 +833,25 @@ qede_mac_int_ops(struct rte_eth_dev *eth_dev, struct ecore_filter_ucast *ucast, { struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev); struct ecore_dev *edev = QEDE_INIT_EDEV(qdev); - enum _ecore_status_t rc; - struct ecore_filter_mcast mcast; - struct qede_mcast_entry *tmp; - uint16_t j = 0; + enum _ecore_status_t rc = ECORE_INVAL; - /* Multicast */ - if (is_multicast_ether_addr((struct ether_addr *)ucast->mac)) { - if (add) { - if (qdev->num_mc_addr >= ECORE_MAX_MC_ADDRS) { - DP_ERR(edev, - "Mcast filter table limit exceeded, " - "Please enable mcast promisc mode\n"); - return -ECORE_INVAL; - } - } - rc = qede_mcast_filter(eth_dev, ucast, add); - if (rc == 0) { - DP_INFO(edev, "num_mc_addrs = %u\n", qdev->num_mc_addr); - memset(&mcast, 0, sizeof(mcast)); - mcast.num_mc_addrs = qdev->num_mc_addr; - mcast.opcode = ECORE_FILTER_ADD; - SLIST_FOREACH(tmp, &qdev->mc_list_head, list) { - ether_addr_copy(&tmp->mac, - (struct ether_addr *)&mcast.mac[j]); - j++; - } - rc = ecore_filter_mcast_cmd(edev, &mcast, - ECORE_SPQ_MODE_CB, NULL); - } - if (rc != ECORE_SUCCESS) { - DP_ERR(edev, "Failed to add multicast filter" - " rc = %d, op = %d\n", rc, add); - } - } else { /* Unicast */ - if (add) { - if (qdev->num_uc_addr >= - qdev->dev_info.num_mac_filters) { - DP_ERR(edev, - "Ucast filter table limit exceeded," - " Please enable promisc mode\n"); - return -ECORE_INVAL; - } - } - rc = qede_ucast_filter(eth_dev, ucast, add); - if (rc == 0) - rc = ecore_filter_ucast_cmd(edev, ucast, - ECORE_SPQ_MODE_CB, NULL); - if (rc != ECORE_SUCCESS) { - DP_ERR(edev, "MAC filter failed, rc = %d, op = %d\n", - rc, add); - } + if (add && (qdev->num_uc_addr >= qdev->dev_info.num_mac_filters)) { + DP_ERR(edev, "Ucast filter table limit exceeded," + " Please enable promisc mode\n"); + return ECORE_INVAL; } + rc = qede_ucast_filter(eth_dev, ucast, add); + if (rc == 0) + rc = ecore_filter_ucast_cmd(edev, ucast, + ECORE_SPQ_MODE_CB, NULL); + /* Indicate error only for add filter operation. + * Delete filter operations are not severe. + */ + if ((rc != ECORE_SUCCESS) && add) + DP_ERR(edev, "MAC filter failed, rc = %d, op = %d\n", + rc, add); + return rc; } @@ -886,7 +862,11 @@ qede_mac_addr_add(struct rte_eth_dev *eth_dev, struct ether_addr *mac_addr, struct ecore_filter_ucast ucast; int re; + if (!is_valid_assigned_ether_addr(mac_addr)) + return -EINVAL; + qede_set_ucast_cmn_params(&ucast); + ucast.opcode = ECORE_FILTER_ADD; ucast.type = ECORE_FILTER_MAC; ether_addr_copy(mac_addr, (struct ether_addr *)&ucast.mac); re = (int)qede_mac_int_ops(eth_dev, &ucast, 1); @@ -908,6 +888,9 @@ qede_mac_addr_remove(struct rte_eth_dev *eth_dev, uint32_t index) return; } + if (!is_valid_assigned_ether_addr(ð_dev->data->mac_addrs[index])) + return; + qede_set_ucast_cmn_params(&ucast); ucast.opcode = ECORE_FILTER_REMOVE; ucast.type = ECORE_FILTER_MAC; @@ -916,7 +899,7 @@ qede_mac_addr_remove(struct rte_eth_dev *eth_dev, uint32_t index) ether_addr_copy(ð_dev->data->mac_addrs[index], (struct ether_addr *)&ucast.mac); - ecore_filter_ucast_cmd(edev, &ucast, ECORE_SPQ_MODE_CB, NULL); + qede_mac_int_ops(eth_dev, &ucast, false); } static void @@ -933,6 +916,7 @@ qede_mac_addr_set(struct rte_eth_dev *eth_dev, struct ether_addr *mac_addr) return; } + qede_mac_addr_remove(eth_dev, 0); qede_mac_addr_add(eth_dev, mac_addr, 0, 0); } @@ -1011,9 +995,9 @@ static int qede_vlan_filter_set(struct rte_eth_dev *eth_dev, SLIST_FOREACH(tmp, &qdev->vlan_list_head, list) { if (tmp->vid == vlan_id) { - DP_ERR(edev, "VLAN %u already configured\n", - vlan_id); - return -EEXIST; + DP_INFO(edev, "VLAN %u already configured\n", + vlan_id); + return 0; } } @@ -1116,6 +1100,8 @@ static int qede_vlan_offload_set(struct rte_eth_dev *eth_dev, int mask) DP_INFO(edev, "No offloads are supported with VLAN Q-in-Q" " and classification is based on outer tag only\n"); + qdev->vlan_offload_mask = mask; + DP_INFO(edev, "vlan offload mask %d vlan-strip %d vlan-filter %d\n", mask, rxmode->hw_vlan_strip, rxmode->hw_vlan_filter); @@ -1192,10 +1178,9 @@ static int qede_dev_start(struct rte_eth_dev *eth_dev) PMD_INIT_FUNC_TRACE(edev); /* Update MTU only if it has changed */ - if (qdev->mtu != qdev->new_mtu) { - if (qede_update_mtu(eth_dev, qdev->new_mtu)) + if (eth_dev->data->mtu != qdev->mtu) { + if (qede_update_mtu(eth_dev, qdev->mtu)) goto err; - qdev->mtu = qdev->new_mtu; } /* Configure TPA parameters */ @@ -1211,6 +1196,9 @@ static int qede_dev_start(struct rte_eth_dev *eth_dev) if (qede_start_queues(eth_dev)) goto err; + if (IS_PF(edev)) + qede_reset_queue_stats(qdev, true); + /* Newer SR-IOV PF driver expects RX/TX queues to be started before * enabling RSS. Hence RSS configuration is deferred upto this point. * Also, we would like to retain similar behavior in PF case, so we @@ -1224,9 +1212,6 @@ static int qede_dev_start(struct rte_eth_dev *eth_dev) if (qede_activate_vport(eth_dev, true)) goto err; - /* Bring-up the link */ - qede_dev_set_link_state(eth_dev, true); - /* Update link status */ qede_link_update(eth_dev, 0); @@ -1261,16 +1246,13 @@ static void qede_dev_stop(struct rte_eth_dev *eth_dev) /* Disable traffic */ ecore_hw_stop_fastpath(edev); /* TBD - loop */ - /* Bring the link down */ - qede_dev_set_link_state(eth_dev, false); - DP_INFO(edev, "Device is stopped\n"); } -#define QEDE_TX_SWITCHING "vf_txswitch" +#define QEDE_VF_TX_SWITCHING "vf_tx_switching" const char *valid_args[] = { - QEDE_TX_SWITCHING, + QEDE_VF_TX_SWITCHING, NULL, }; @@ -1280,9 +1262,7 @@ static int qede_args_check(const char *key, const char *val, void *opaque) int ret = 0; struct rte_eth_dev *eth_dev = opaque; struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev); -#ifdef RTE_LIBRTE_QEDE_DEBUG_INFO struct ecore_dev *edev = QEDE_INIT_EDEV(qdev); -#endif errno = 0; tmp = strtoul(val, NULL, 0); @@ -1291,8 +1271,10 @@ static int qede_args_check(const char *key, const char *val, void *opaque) return errno; } - if (strcmp(QEDE_TX_SWITCHING, key) == 0) + if (strcmp(QEDE_VF_TX_SWITCHING, key) == 0 && IS_VF(edev)) { qdev->enable_tx_switching = !!tmp; + DP_INFO(edev, "Disabling VF tx-switching\n"); + } return ret; } @@ -1367,7 +1349,8 @@ static int qede_dev_configure(struct rte_eth_dev *eth_dev) /* Parse devargs and fix up rxmode */ if (qede_args(eth_dev)) - return -ENOTSUP; + DP_NOTICE(edev, false, + "Invalid devargs supplied, requested change will not take effect\n"); /* Sanity checks and throw warnings */ if (rxmode->enable_scatter) @@ -1390,20 +1373,11 @@ static int qede_dev_configure(struct rte_eth_dev *eth_dev) if (qede_check_fdir_support(eth_dev)) return -ENOTSUP; - /* Deallocate resources if held previously. It is needed only if the - * queue count has been changed from previous configuration. If its - * going to change then it means RX/TX queue setup will be called - * again and the fastpath pointers will be reinitialized there. - */ - if (qdev->num_tx_queues != eth_dev->data->nb_tx_queues || - qdev->num_rx_queues != eth_dev->data->nb_rx_queues) { - qede_dealloc_fp_resc(eth_dev); - /* Proceed with updated queue count */ - qdev->num_tx_queues = eth_dev->data->nb_tx_queues; - qdev->num_rx_queues = eth_dev->data->nb_rx_queues; - if (qede_alloc_fp_resc(qdev)) - return -ENOMEM; - } + qede_dealloc_fp_resc(eth_dev); + qdev->num_tx_queues = eth_dev->data->nb_tx_queues; + qdev->num_rx_queues = eth_dev->data->nb_rx_queues; + if (qede_alloc_fp_resc(qdev)) + return -ENOMEM; /* If jumbo enabled adjust MTU */ if (eth_dev->data->dev_conf.rxmode.jumbo_frame) @@ -1411,24 +1385,13 @@ static int qede_dev_configure(struct rte_eth_dev *eth_dev) eth_dev->data->dev_conf.rxmode.max_rx_pkt_len - ETHER_HDR_LEN - ETHER_CRC_LEN; - /* VF's MTU has to be set using vport-start where as - * PF's MTU can be updated via vport-update. - */ - if (IS_VF(edev)) { - if (qede_start_vport(qdev, eth_dev->data->mtu)) - return -1; - } else { - if (qede_update_mtu(eth_dev, eth_dev->data->mtu)) - return -1; - } - + if (qede_start_vport(qdev, eth_dev->data->mtu)) + return -1; qdev->mtu = eth_dev->data->mtu; - qdev->new_mtu = qdev->mtu; /* Enable VLAN offloads by default */ ret = qede_vlan_offload_set(eth_dev, ETH_VLAN_STRIP_MASK | - ETH_VLAN_FILTER_MASK | - ETH_VLAN_EXTEND_MASK); + ETH_VLAN_FILTER_MASK); if (ret) return ret; @@ -1526,7 +1489,7 @@ qede_link_update(struct rte_eth_dev *eth_dev, __rte_unused int wait_to_complete) { struct qede_dev *qdev = eth_dev->data->dev_private; struct ecore_dev *edev = &qdev->edev; - uint16_t link_duplex; + uint16_t link_duplex, old_link_status; struct qed_link_output link; struct rte_eth_link *curr = ð_dev->data->dev_link; @@ -1551,6 +1514,7 @@ qede_link_update(struct rte_eth_dev *eth_dev, __rte_unused int wait_to_complete) curr->link_duplex = link_duplex; /* Link Status */ + old_link_status = curr->link_status; curr->link_status = (link.link_up) ? ETH_LINK_UP : ETH_LINK_DOWN; /* AN */ @@ -1562,7 +1526,7 @@ qede_link_update(struct rte_eth_dev *eth_dev, __rte_unused int wait_to_complete) curr->link_autoneg, curr->link_status); /* return 0 means link status changed, -1 means not changed */ - return ((curr->link_status == link.link_up) ? -1 : 0); + return ((curr->link_status == old_link_status) ? -1 : 0); } static void qede_promiscuous_enable(struct rte_eth_dev *eth_dev) @@ -1636,17 +1600,32 @@ static void qede_dev_close(struct rte_eth_dev *eth_dev) qede_dev_stop(eth_dev); qede_stop_vport(edev); + qdev->vport_started = false; qede_fdir_dealloc_resc(eth_dev); qede_dealloc_fp_resc(eth_dev); eth_dev->data->nb_rx_queues = 0; eth_dev->data->nb_tx_queues = 0; + /* Bring the link down */ + qede_dev_set_link_state(eth_dev, false); qdev->ops->common->slowpath_stop(edev); qdev->ops->common->remove(edev); rte_intr_disable(&pci_dev->intr_handle); - rte_intr_callback_unregister(&pci_dev->intr_handle, - qede_interrupt_handler, (void *)eth_dev); + + switch (pci_dev->intr_handle.type) { + case RTE_INTR_HANDLE_UIO_INTX: + case RTE_INTR_HANDLE_VFIO_LEGACY: + rte_intr_callback_unregister(&pci_dev->intr_handle, + qede_interrupt_handler_intx, + (void *)eth_dev); + break; + default: + rte_intr_callback_unregister(&pci_dev->intr_handle, + qede_interrupt_handler, + (void *)eth_dev); + } + if (ECORE_IS_CMT(edev)) rte_eal_alarm_cancel(qede_poll_sp_sb_cb, (void *)eth_dev); } @@ -1935,6 +1914,99 @@ static void qede_allmulticast_disable(struct rte_eth_dev *eth_dev) QED_FILTER_RX_MODE_TYPE_REGULAR); } +static int +qede_set_mc_addr_list(struct rte_eth_dev *eth_dev, struct ether_addr *mc_addrs, + uint32_t mc_addrs_num) +{ + struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev); + struct ecore_dev *edev = QEDE_INIT_EDEV(qdev); + uint8_t i; + + if (mc_addrs_num > ECORE_MAX_MC_ADDRS) { + DP_ERR(edev, "Reached max multicast filters limit," + "Please enable multicast promisc mode\n"); + return -ENOSPC; + } + + for (i = 0; i < mc_addrs_num; i++) { + if (!is_multicast_ether_addr(&mc_addrs[i])) { + DP_ERR(edev, "Not a valid multicast MAC\n"); + return -EINVAL; + } + } + + /* Flush all existing entries */ + if (qede_del_mcast_filters(eth_dev)) + return -1; + + /* Set new mcast list */ + return qede_add_mcast_filters(eth_dev, mc_addrs, mc_addrs_num); +} + +/* Update MTU via vport-update without doing port restart. + * The vport must be deactivated before calling this API. + */ +int qede_update_mtu(struct rte_eth_dev *eth_dev, uint16_t mtu) +{ + struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev); + struct ecore_dev *edev = QEDE_INIT_EDEV(qdev); + struct ecore_hwfn *p_hwfn; + int rc; + int i; + + if (IS_PF(edev)) { + struct ecore_sp_vport_update_params params; + + memset(¶ms, 0, sizeof(struct ecore_sp_vport_update_params)); + params.vport_id = 0; + params.mtu = mtu; + params.vport_id = 0; + for_each_hwfn(edev, i) { + p_hwfn = &edev->hwfns[i]; + params.opaque_fid = p_hwfn->hw_info.opaque_fid; + rc = ecore_sp_vport_update(p_hwfn, ¶ms, + ECORE_SPQ_MODE_EBLOCK, NULL); + if (rc != ECORE_SUCCESS) + goto err; + } + } else { + for_each_hwfn(edev, i) { + p_hwfn = &edev->hwfns[i]; + rc = ecore_vf_pf_update_mtu(p_hwfn, mtu); + if (rc == ECORE_INVAL) { + DP_INFO(edev, "VF MTU Update TLV not supported\n"); + /* Recreate vport */ + rc = qede_start_vport(qdev, mtu); + if (rc != ECORE_SUCCESS) + goto err; + + /* Restore config lost due to vport stop */ + if (eth_dev->data->promiscuous) + qede_promiscuous_enable(eth_dev); + else + qede_promiscuous_disable(eth_dev); + + if (eth_dev->data->all_multicast) + qede_allmulticast_enable(eth_dev); + else + qede_allmulticast_disable(eth_dev); + + qede_vlan_offload_set(eth_dev, + qdev->vlan_offload_mask); + } else if (rc != ECORE_SUCCESS) { + goto err; + } + } + } + DP_INFO(edev, "%s MTU updated to %u\n", IS_PF(edev) ? "PF" : "VF", mtu); + + return 0; + +err: + DP_ERR(edev, "Failed to update MTU\n"); + return -1; +} + static int qede_flow_ctrl_set(struct rte_eth_dev *eth_dev, struct rte_eth_fc_conf *fc_conf) { @@ -2087,7 +2159,7 @@ int qede_rss_hash_update(struct rte_eth_dev *eth_dev, vport_update_params.vport_id = 0; /* pass the L2 handles instead of qids */ for (i = 0 ; i < ECORE_RSS_IND_TABLE_SIZE ; i++) { - idx = qdev->rss_ind_table[i]; + idx = i % QEDE_RSS_COUNT(qdev); rss_params.rss_ind_table[i] = qdev->fp_array[idx].rxq->handle; } vport_update_params.rss_params = &rss_params; @@ -2311,8 +2383,6 @@ static int qede_set_mtu(struct rte_eth_dev *dev, uint16_t mtu) int i; PMD_INIT_FUNC_TRACE(edev); - if (IS_VF(edev)) - return -ENOTSUP; qede_dev_info_get(dev, &dev_info); max_rx_pkt_len = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN; frame_size = max_rx_pkt_len + QEDE_ETH_OVERHEAD; @@ -2339,7 +2409,8 @@ static int qede_set_mtu(struct rte_eth_dev *dev, uint16_t mtu) restart = true; } rte_delay_ms(1000); - qdev->new_mtu = mtu; + qdev->mtu = mtu; + /* Fix up RX buf size for all queues of the port */ for_each_rss(i) { fp = &qdev->fp_array[i]; @@ -2353,17 +2424,19 @@ static int qede_set_mtu(struct rte_eth_dev *dev, uint16_t mtu) rx_buf_size = frame_size; rx_buf_size = QEDE_CEIL_TO_CACHE_LINE_SIZE(rx_buf_size); fp->rxq->rx_buf_size = rx_buf_size; - DP_INFO(edev, "buf_size adjusted to %u\n", rx_buf_size); + DP_INFO(edev, "RX buffer size %u\n", rx_buf_size); } } if (max_rx_pkt_len > ETHER_MAX_LEN) dev->data->dev_conf.rxmode.jumbo_frame = 1; else dev->data->dev_conf.rxmode.jumbo_frame = 0; + if (!dev->data->dev_started && restart) { qede_dev_start(dev); dev->data->dev_started = 1; } + /* update max frame size */ dev->data->dev_conf.rxmode.max_rx_pkt_len = max_rx_pkt_len; /* Reassign back */ @@ -2715,6 +2788,7 @@ static const struct eth_dev_ops qede_eth_dev_ops = { .promiscuous_disable = qede_promiscuous_disable, .allmulticast_enable = qede_allmulticast_enable, .allmulticast_disable = qede_allmulticast_disable, + .set_mc_addr_list = qede_set_mc_addr_list, .dev_stop = qede_dev_stop, .dev_close = qede_dev_close, .stats_get = qede_get_stats, @@ -2755,6 +2829,7 @@ static const struct eth_dev_ops qede_eth_vf_dev_ops = { .promiscuous_disable = qede_promiscuous_disable, .allmulticast_enable = qede_allmulticast_enable, .allmulticast_disable = qede_allmulticast_disable, + .set_mc_addr_list = qede_set_mc_addr_list, .dev_stop = qede_dev_stop, .dev_close = qede_dev_close, .stats_get = qede_get_stats, @@ -2772,6 +2847,9 @@ static const struct eth_dev_ops qede_eth_vf_dev_ops = { .mtu_set = qede_set_mtu, .udp_tunnel_port_add = qede_udp_dst_port_add, .udp_tunnel_port_del = qede_udp_dst_port_del, + .mac_addr_add = qede_mac_addr_add, + .mac_addr_remove = qede_mac_addr_remove, + .mac_addr_set = qede_mac_addr_set, }; static void qede_update_pf_params(struct ecore_dev *edev) @@ -2800,6 +2878,7 @@ static int qede_common_dev_init(struct rte_eth_dev *eth_dev, bool is_vf) /* Fix up ecore debug level */ uint32_t dp_module = ~0 & ~ECORE_MSG_HW; uint8_t dp_level = ECORE_LEVEL_VERBOSE; + uint32_t int_mode; int rc; /* Extract key data structures */ @@ -2844,8 +2923,22 @@ static int qede_common_dev_init(struct rte_eth_dev *eth_dev, bool is_vf) return -ENODEV; } qede_update_pf_params(edev); - rte_intr_callback_register(&pci_dev->intr_handle, - qede_interrupt_handler, (void *)eth_dev); + + switch (pci_dev->intr_handle.type) { + case RTE_INTR_HANDLE_UIO_INTX: + case RTE_INTR_HANDLE_VFIO_LEGACY: + int_mode = ECORE_INT_MODE_INTA; + rte_intr_callback_register(&pci_dev->intr_handle, + qede_interrupt_handler_intx, + (void *)eth_dev); + break; + default: + int_mode = ECORE_INT_MODE_MSIX; + rte_intr_callback_register(&pci_dev->intr_handle, + qede_interrupt_handler, + (void *)eth_dev); + } + if (rte_intr_enable(&pci_dev->intr_handle)) { DP_ERR(edev, "rte_intr_enable() failed\n"); return -ENODEV; @@ -2853,7 +2946,8 @@ static int qede_common_dev_init(struct rte_eth_dev *eth_dev, bool is_vf) /* Start the Slowpath-process */ memset(¶ms, 0, sizeof(struct qed_slowpath_params)); - params.int_mode = ECORE_INT_MODE_MSIX; + + params.int_mode = int_mode; params.drv_major = QEDE_PMD_VERSION_MAJOR; params.drv_minor = QEDE_PMD_VERSION_MINOR; params.drv_rev = QEDE_PMD_VERSION_REVISION; @@ -2936,7 +3030,7 @@ static int qede_common_dev_init(struct rte_eth_dev *eth_dev, bool is_vf) ECORE_LEADING_HWFN(edev), vf_mac, &is_mac_forced); - if (is_mac_exist && is_mac_forced) { + if (is_mac_exist) { DP_INFO(edev, "VF macaddr received from PF\n"); ether_addr_copy((struct ether_addr *)&vf_mac, ð_dev->data->mac_addrs[0]); @@ -2957,16 +3051,24 @@ static int qede_common_dev_init(struct rte_eth_dev *eth_dev, bool is_vf) do_once = false; } + /* Bring-up the link */ + qede_dev_set_link_state(eth_dev, true); + adapter->num_tx_queues = 0; adapter->num_rx_queues = 0; SLIST_INIT(&adapter->fdir_info.fdir_list_head); SLIST_INIT(&adapter->vlan_list_head); SLIST_INIT(&adapter->uc_list_head); + SLIST_INIT(&adapter->mc_list_head); adapter->mtu = ETHER_MTU; - adapter->new_mtu = ETHER_MTU; - if (!is_vf) - if (qede_start_vport(adapter, adapter->mtu)) - return -1; + adapter->vport_started = false; + + /* VF tunnel offloads is enabled by default in PF driver */ + adapter->vxlan.enable = true; + adapter->vxlan.num_filters = 0; + adapter->vxlan.filter_type = ETH_TUNNEL_FILTER_IMAC | + ETH_TUNNEL_FILTER_IVLAN; + adapter->vxlan.udp_port = QEDE_VXLAN_DEF_PORT; DP_INFO(edev, "MAC address : %02x:%02x:%02x:%02x:%02x:%02x\n", adapter->primary_mac.addr_bytes[0],