X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=examples%2Fexception_path%2Fmain.c;fp=examples%2Fexception_path%2Fmain.c;h=bec980403cc66b37aa138aa302351783b536989c;hb=97f17497d162afdb82c8704bf097f0fee3724b2e;hp=0000000000000000000000000000000000000000;hpb=e04be89c2409570e0055b2cda60bd11395bb93b0;p=deb_dpdk.git

diff --git a/examples/exception_path/main.c b/examples/exception_path/main.c
new file mode 100644
index 00000000..bec98040
--- /dev/null
+++ b/examples/exception_path/main.c
@@ -0,0 +1,571 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <string.h>
+#include <sys/queue.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <getopt.h>
+
+#include <netinet/in.h>
+#include <linux/if.h>
+#include <linux/if_tun.h>
+#include <fcntl.h>
+#include <sys/ioctl.h>
+#include <unistd.h>
+#include <signal.h>
+
+#include <rte_common.h>
+#include <rte_log.h>
+#include <rte_memory.h>
+#include <rte_memcpy.h>
+#include <rte_memzone.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_launch.h>
+#include <rte_atomic.h>
+#include <rte_lcore.h>
+#include <rte_branch_prediction.h>
+#include <rte_interrupts.h>
+#include <rte_pci.h>
+#include <rte_debug.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_ring.h>
+#include <rte_log.h>
+#include <rte_mempool.h>
+#include <rte_mbuf.h>
+#include <rte_string_fns.h>
+#include <rte_cycles.h>
+
+/* Macros for printing using RTE_LOG */
+#define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1
+#define FATAL_ERROR(fmt, args...)       rte_exit(EXIT_FAILURE, fmt "\n", ##args)
+#define PRINT_INFO(fmt, args...)        RTE_LOG(INFO, APP, fmt "\n", ##args)
+
+/* Max ports than can be used (each port is associated with two lcores) */
+#define MAX_PORTS               (RTE_MAX_LCORE / 2)
+
+/* Max size of a single packet */
+#define MAX_PACKET_SZ (2048)
+
+/* Size of the data buffer in each mbuf */
+#define MBUF_DATA_SZ (MAX_PACKET_SZ + RTE_PKTMBUF_HEADROOM)
+
+/* Number of mbufs in mempool that is created */
+#define NB_MBUF                 8192
+
+/* How many packets to attempt to read from NIC in one go */
+#define PKT_BURST_SZ            32
+
+/* How many objects (mbufs) to keep in per-lcore mempool cache */
+#define MEMPOOL_CACHE_SZ        PKT_BURST_SZ
+
+/* Number of RX ring descriptors */
+#define NB_RXD                  128
+
+/* Number of TX ring descriptors */
+#define NB_TXD                  512
+
+/*
+ * RX and TX Prefetch, Host, and Write-back threshold values should be
+ * carefully set for optimal performance. Consult the network
+ * controller's datasheet and supporting DPDK documentation for guidance
+ * on how these parameters should be set.
+ */
+
+/* Options for configuring ethernet port */
+static const struct rte_eth_conf port_conf = {
+	.rxmode = {
+		.header_split = 0,      /* Header Split disabled */
+		.hw_ip_checksum = 0,    /* IP checksum offload disabled */
+		.hw_vlan_filter = 0,    /* VLAN filtering disabled */
+		.jumbo_frame = 0,       /* Jumbo Frame Support disabled */
+		.hw_strip_crc = 0,      /* CRC stripped by hardware */
+	},
+	.txmode = {
+		.mq_mode = ETH_MQ_TX_NONE,
+	},
+};
+
+/* Mempool for mbufs */
+static struct rte_mempool * pktmbuf_pool = NULL;
+
+/* Mask of enabled ports */
+static uint32_t ports_mask = 0;
+
+/* Mask of cores that read from NIC and write to tap */
+static uint64_t input_cores_mask = 0;
+
+/* Mask of cores that read from tap and write to NIC */
+static uint64_t output_cores_mask = 0;
+
+/* Array storing port_id that is associated with each lcore */
+static uint8_t port_ids[RTE_MAX_LCORE];
+
+/* Structure type for recording lcore-specific stats */
+struct stats {
+	uint64_t rx;
+	uint64_t tx;
+	uint64_t dropped;
+};
+
+/* Array of lcore-specific stats */
+static struct stats lcore_stats[RTE_MAX_LCORE];
+
+/* Print out statistics on packets handled */
+static void
+print_stats(void)
+{
+	unsigned i;
+
+	printf("\n**Exception-Path example application statistics**\n"
+	       "=======  ======  ============  ============  ===============\n"
+	       " Lcore    Port            RX            TX    Dropped on TX\n"
+	       "-------  ------  ------------  ------------  ---------------\n");
+	RTE_LCORE_FOREACH(i) {
+		printf("%6u %7u %13"PRIu64" %13"PRIu64" %16"PRIu64"\n",
+		       i, (unsigned)port_ids[i],
+		       lcore_stats[i].rx, lcore_stats[i].tx,
+		       lcore_stats[i].dropped);
+	}
+	printf("=======  ======  ============  ============  ===============\n");
+}
+
+/* Custom handling of signals to handle stats */
+static void
+signal_handler(int signum)
+{
+	/* When we receive a USR1 signal, print stats */
+	if (signum == SIGUSR1) {
+		print_stats();
+	}
+
+	/* When we receive a USR2 signal, reset stats */
+	if (signum == SIGUSR2) {
+		memset(&lcore_stats, 0, sizeof(lcore_stats));
+		printf("\n**Statistics have been reset**\n");
+		return;
+	}
+}
+
+/*
+ * Create a tap network interface, or use existing one with same name.
+ * If name[0]='\0' then a name is automatically assigned and returned in name.
+ */
+static int tap_create(char *name)
+{
+	struct ifreq ifr;
+	int fd, ret;
+
+	fd = open("/dev/net/tun", O_RDWR);
+	if (fd < 0)
+		return fd;
+
+	memset(&ifr, 0, sizeof(ifr));
+
+	/* TAP device without packet information */
+	ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
+
+	if (name && *name)
+		snprintf(ifr.ifr_name, IFNAMSIZ, "%s", name);
+
+	ret = ioctl(fd, TUNSETIFF, (void *) &ifr);
+	if (ret < 0) {
+		close(fd);
+		return ret;
+	}
+
+	if (name)
+		snprintf(name, IFNAMSIZ, "%s", ifr.ifr_name);
+
+	return fd;
+}
+
+/* Main processing loop */
+static int
+main_loop(__attribute__((unused)) void *arg)
+{
+	const unsigned lcore_id = rte_lcore_id();
+	char tap_name[IFNAMSIZ];
+	int tap_fd;
+
+	if ((1ULL << lcore_id) & input_cores_mask) {
+		/* Create new tap interface */
+		snprintf(tap_name, IFNAMSIZ, "tap_dpdk_%.2u", lcore_id);
+		tap_fd = tap_create(tap_name);
+		if (tap_fd < 0)
+			FATAL_ERROR("Could not create tap interface \"%s\" (%d)",
+					tap_name, tap_fd);
+
+		PRINT_INFO("Lcore %u is reading from port %u and writing to %s",
+		           lcore_id, (unsigned)port_ids[lcore_id], tap_name);
+		fflush(stdout);
+		/* Loop forever reading from NIC and writing to tap */
+		for (;;) {
+			struct rte_mbuf *pkts_burst[PKT_BURST_SZ];
+			unsigned i;
+			const unsigned nb_rx =
+					rte_eth_rx_burst(port_ids[lcore_id], 0,
+					    pkts_burst, PKT_BURST_SZ);
+			lcore_stats[lcore_id].rx += nb_rx;
+			for (i = 0; likely(i < nb_rx); i++) {
+				struct rte_mbuf *m = pkts_burst[i];
+				/* Ignore return val from write() */
+				int ret = write(tap_fd,
+				                rte_pktmbuf_mtod(m, void*),
+				                rte_pktmbuf_data_len(m));
+				rte_pktmbuf_free(m);
+				if (unlikely(ret < 0))
+					lcore_stats[lcore_id].dropped++;
+				else
+					lcore_stats[lcore_id].tx++;
+			}
+		}
+	}
+	else if ((1ULL << lcore_id) & output_cores_mask) {
+		/* Create new tap interface */
+		snprintf(tap_name, IFNAMSIZ, "tap_dpdk_%.2u", lcore_id);
+		tap_fd = tap_create(tap_name);
+		if (tap_fd < 0)
+			FATAL_ERROR("Could not create tap interface \"%s\" (%d)",
+					tap_name, tap_fd);
+
+		PRINT_INFO("Lcore %u is reading from %s and writing to port %u",
+		           lcore_id, tap_name, (unsigned)port_ids[lcore_id]);
+		fflush(stdout);
+		/* Loop forever reading from tap and writing to NIC */
+		for (;;) {
+			int ret;
+			struct rte_mbuf *m = rte_pktmbuf_alloc(pktmbuf_pool);
+			if (m == NULL)
+				continue;
+
+			ret = read(tap_fd, rte_pktmbuf_mtod(m, void *),
+				MAX_PACKET_SZ);
+			lcore_stats[lcore_id].rx++;
+			if (unlikely(ret < 0)) {
+				FATAL_ERROR("Reading from %s interface failed",
+				            tap_name);
+			}
+			m->nb_segs = 1;
+			m->next = NULL;
+			m->pkt_len = (uint16_t)ret;
+			m->data_len = (uint16_t)ret;
+			ret = rte_eth_tx_burst(port_ids[lcore_id], 0, &m, 1);
+			if (unlikely(ret < 1)) {
+				rte_pktmbuf_free(m);
+				lcore_stats[lcore_id].dropped++;
+			}
+			else {
+				lcore_stats[lcore_id].tx++;
+			}
+		}
+	}
+	else {
+		PRINT_INFO("Lcore %u has nothing to do", lcore_id);
+		return 0;
+	}
+	/*
+	 * Tap file is closed automatically when program exits. Putting close()
+	 * here will cause the compiler to give an error about unreachable code.
+	 */
+}
+
+/* Display usage instructions */
+static void
+print_usage(const char *prgname)
+{
+	PRINT_INFO("\nUsage: %s [EAL options] -- -p PORTMASK -i IN_CORES -o OUT_CORES\n"
+	           "    -p PORTMASK: hex bitmask of ports to use\n"
+	           "    -i IN_CORES: hex bitmask of cores which read from NIC\n"
+	           "    -o OUT_CORES: hex bitmask of cores which write to NIC",
+	           prgname);
+}
+
+/* Convert string to unsigned number. 0 is returned if error occurs */
+static uint64_t
+parse_unsigned(const char *portmask)
+{
+	char *end = NULL;
+	uint64_t num;
+
+	num = strtoull(portmask, &end, 16);
+	if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+		return 0;
+
+	return (uint64_t)num;
+}
+
+/* Record affinities between ports and lcores in global port_ids[] array */
+static void
+setup_port_lcore_affinities(void)
+{
+	unsigned long i;
+	uint8_t tx_port = 0;
+	uint8_t rx_port = 0;
+
+	/* Setup port_ids[] array, and check masks were ok */
+	RTE_LCORE_FOREACH(i) {
+		if (input_cores_mask & (1ULL << i)) {
+			/* Skip ports that are not enabled */
+			while ((ports_mask & (1 << rx_port)) == 0) {
+				rx_port++;
+				if (rx_port > (sizeof(ports_mask) * 8))
+					goto fail; /* not enough ports */
+			}
+
+			port_ids[i] = rx_port++;
+		}
+		else if (output_cores_mask & (1ULL << i)) {
+			/* Skip ports that are not enabled */
+			while ((ports_mask & (1 << tx_port)) == 0) {
+				tx_port++;
+				if (tx_port > (sizeof(ports_mask) * 8))
+					goto fail; /* not enough ports */
+			}
+
+			port_ids[i] = tx_port++;
+		}
+	}
+
+	if (rx_port != tx_port)
+		goto fail; /* uneven number of cores in masks */
+
+	if (ports_mask & (~((1 << rx_port) - 1)))
+		goto fail; /* unused ports */
+
+	return;
+fail:
+	FATAL_ERROR("Invalid core/port masks specified on command line");
+}
+
+/* Parse the arguments given in the command line of the application */
+static void
+parse_args(int argc, char **argv)
+{
+	int opt;
+	const char *prgname = argv[0];
+
+	/* Disable printing messages within getopt() */
+	opterr = 0;
+
+	/* Parse command line */
+	while ((opt = getopt(argc, argv, "i:o:p:")) != EOF) {
+		switch (opt) {
+		case 'i':
+			input_cores_mask = parse_unsigned(optarg);
+			break;
+		case 'o':
+			output_cores_mask = parse_unsigned(optarg);
+			break;
+		case 'p':
+			ports_mask = parse_unsigned(optarg);
+			break;
+		default:
+			print_usage(prgname);
+			FATAL_ERROR("Invalid option specified");
+		}
+	}
+
+	/* Check that options were parsed ok */
+	if (input_cores_mask == 0) {
+		print_usage(prgname);
+		FATAL_ERROR("IN_CORES not specified correctly");
+	}
+	if (output_cores_mask == 0) {
+		print_usage(prgname);
+		FATAL_ERROR("OUT_CORES not specified correctly");
+	}
+	if (ports_mask == 0) {
+		print_usage(prgname);
+		FATAL_ERROR("PORTMASK not specified correctly");
+	}
+
+	setup_port_lcore_affinities();
+}
+
+/* Initialise a single port on an Ethernet device */
+static void
+init_port(uint8_t port)
+{
+	int ret;
+
+	/* Initialise device and RX/TX queues */
+	PRINT_INFO("Initialising port %u ...", (unsigned)port);
+	fflush(stdout);
+	ret = rte_eth_dev_configure(port, 1, 1, &port_conf);
+	if (ret < 0)
+		FATAL_ERROR("Could not configure port%u (%d)",
+		            (unsigned)port, ret);
+
+	ret = rte_eth_rx_queue_setup(port, 0, NB_RXD, rte_eth_dev_socket_id(port),
+				NULL,
+				pktmbuf_pool);
+	if (ret < 0)
+		FATAL_ERROR("Could not setup up RX queue for port%u (%d)",
+		            (unsigned)port, ret);
+
+	ret = rte_eth_tx_queue_setup(port, 0, NB_TXD, rte_eth_dev_socket_id(port),
+				NULL);
+	if (ret < 0)
+		FATAL_ERROR("Could not setup up TX queue for port%u (%d)",
+		            (unsigned)port, ret);
+
+	ret = rte_eth_dev_start(port);
+	if (ret < 0)
+		FATAL_ERROR("Could not start port%u (%d)", (unsigned)port, ret);
+
+	rte_eth_promiscuous_enable(port);
+}
+
+/* Check the link status of all ports in up to 9s, and print them finally */
+static void
+check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+{
+#define CHECK_INTERVAL 100 /* 100ms */
+#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
+	uint8_t portid, count, all_ports_up, print_flag = 0;
+	struct rte_eth_link link;
+
+	printf("\nChecking link status");
+	fflush(stdout);
+	for (count = 0; count <= MAX_CHECK_TIME; count++) {
+		all_ports_up = 1;
+		for (portid = 0; portid < port_num; portid++) {
+			if ((port_mask & (1 << portid)) == 0)
+				continue;
+			memset(&link, 0, sizeof(link));
+			rte_eth_link_get_nowait(portid, &link);
+			/* print link status if flag set */
+			if (print_flag == 1) {
+				if (link.link_status)
+					printf("Port %d Link Up - speed %u "
+						"Mbps - %s\n", (uint8_t)portid,
+						(unsigned)link.link_speed,
+				(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
+					("full-duplex") : ("half-duplex\n"));
+				else
+					printf("Port %d Link Down\n",
+						(uint8_t)portid);
+				continue;
+			}
+			/* clear all_ports_up flag if any link down */
+			if (link.link_status == ETH_LINK_DOWN) {
+				all_ports_up = 0;
+				break;
+			}
+		}
+		/* after finally printing all link status, get out */
+		if (print_flag == 1)
+			break;
+
+		if (all_ports_up == 0) {
+			printf(".");
+			fflush(stdout);
+			rte_delay_ms(CHECK_INTERVAL);
+		}
+
+		/* set the print_flag if all ports up or timeout */
+		if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
+			print_flag = 1;
+			printf("done\n");
+		}
+	}
+}
+
+/* Initialise ports/queues etc. and start main loop on each core */
+int
+main(int argc, char** argv)
+{
+	int ret;
+	unsigned i,high_port;
+	uint8_t nb_sys_ports, port;
+
+	/* Associate signal_hanlder function with USR signals */
+	signal(SIGUSR1, signal_handler);
+	signal(SIGUSR2, signal_handler);
+
+	/* Initialise EAL */
+	ret = rte_eal_init(argc, argv);
+	if (ret < 0)
+		FATAL_ERROR("Could not initialise EAL (%d)", ret);
+	argc -= ret;
+	argv += ret;
+
+	/* Parse application arguments (after the EAL ones) */
+	parse_args(argc, argv);
+
+	/* Create the mbuf pool */
+	pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF,
+			MEMPOOL_CACHE_SZ, 0, MBUF_DATA_SZ, rte_socket_id());
+	if (pktmbuf_pool == NULL) {
+		FATAL_ERROR("Could not initialise mbuf pool");
+		return -1;
+	}
+
+	/* Get number of ports found in scan */
+	nb_sys_ports = rte_eth_dev_count();
+	if (nb_sys_ports == 0)
+		FATAL_ERROR("No supported Ethernet device found");
+	/* Find highest port set in portmask */
+	for (high_port = (sizeof(ports_mask) * 8) - 1;
+			(high_port != 0) && !(ports_mask & (1 << high_port));
+			high_port--)
+		; /* empty body */
+	if (high_port > nb_sys_ports)
+		FATAL_ERROR("Port mask requires more ports than available");
+
+	/* Initialise each port */
+	for (port = 0; port < nb_sys_ports; port++) {
+		/* Skip ports that are not enabled */
+		if ((ports_mask & (1 << port)) == 0) {
+			continue;
+		}
+		init_port(port);
+	}
+	check_all_ports_link_status(nb_sys_ports, ports_mask);
+
+	/* Launch per-lcore function on every lcore */
+	rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
+	RTE_LCORE_FOREACH_SLAVE(i) {
+		if (rte_eal_wait_lcore(i) < 0)
+			return -1;
+	}
+
+	return 0;
+}