X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=examples%2Fip_fragmentation%2Fmain.c;h=f4e3dc3379296cff43b4b3641ee0c3e213569ae2;hb=5076209fa6f4affdf93f4d2f23f51a427f64f72b;hp=81a49187ae32236568ef5be0d2195b9451876075;hpb=97f17497d162afdb82c8704bf097f0fee3724b2e;p=deb_dpdk.git

diff --git a/examples/ip_fragmentation/main.c b/examples/ip_fragmentation/main.c
index 81a49187..f4e3dc33 100644
--- a/examples/ip_fragmentation/main.c
+++ b/examples/ip_fragmentation/main.c
@@ -64,7 +64,6 @@
 #include <rte_debug.h>
 #include <rte_ether.h>
 #include <rte_ethdev.h>
-#include <rte_ring.h>
 #include <rte_mempool.h>
 #include <rte_mbuf.h>
 #include <rte_lpm.h>
@@ -177,7 +176,7 @@ static const struct rte_eth_conf port_conf = {
 		.hw_ip_checksum = 1, /**< IP checksum offload enabled */
 		.hw_vlan_filter = 0, /**< VLAN filtering disabled */
 		.jumbo_frame    = 1, /**< Jumbo Frame Support enabled */
-		.hw_strip_crc   = 0, /**< CRC stripped by hardware */
+		.hw_strip_crc   = 1, /**< CRC stripped by hardware */
 	},
 	.txmode = {
 		.mq_mode = ETH_MQ_TX_NONE,
@@ -654,6 +653,74 @@ check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
 	}
 }
 
+/* Check L3 packet type detection capablity of the NIC port */
+static int
+check_ptype(int portid)
+{
+	int i, ret;
+	int ptype_l3_ipv4 = 0, ptype_l3_ipv6 = 0;
+	uint32_t ptype_mask = RTE_PTYPE_L3_MASK;
+
+	ret = rte_eth_dev_get_supported_ptypes(portid, ptype_mask, NULL, 0);
+	if (ret <= 0)
+		return 0;
+
+	uint32_t ptypes[ret];
+
+	ret = rte_eth_dev_get_supported_ptypes(portid, ptype_mask, ptypes, ret);
+	for (i = 0; i < ret; ++i) {
+		if (ptypes[i] & RTE_PTYPE_L3_IPV4)
+			ptype_l3_ipv4 = 1;
+		if (ptypes[i] & RTE_PTYPE_L3_IPV6)
+			ptype_l3_ipv6 = 1;
+	}
+
+	if (ptype_l3_ipv4 == 0)
+		printf("port %d cannot parse RTE_PTYPE_L3_IPV4\n", portid);
+
+	if (ptype_l3_ipv6 == 0)
+		printf("port %d cannot parse RTE_PTYPE_L3_IPV6\n", portid);
+
+	if (ptype_l3_ipv4 && ptype_l3_ipv6)
+		return 1;
+
+	return 0;
+
+}
+
+/* Parse packet type of a packet by SW */
+static inline void
+parse_ptype(struct rte_mbuf *m)
+{
+	struct ether_hdr *eth_hdr;
+	uint32_t packet_type = RTE_PTYPE_UNKNOWN;
+	uint16_t ether_type;
+
+	eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+	ether_type = eth_hdr->ether_type;
+	if (ether_type == rte_cpu_to_be_16(ETHER_TYPE_IPv4))
+		packet_type |= RTE_PTYPE_L3_IPV4_EXT_UNKNOWN;
+	else if (ether_type == rte_cpu_to_be_16(ETHER_TYPE_IPv6))
+		packet_type |= RTE_PTYPE_L3_IPV6_EXT_UNKNOWN;
+
+	m->packet_type = packet_type;
+}
+
+/* callback function to detect packet type for a queue of a port */
+static uint16_t
+cb_parse_ptype(uint8_t port __rte_unused, uint16_t queue __rte_unused,
+		   struct rte_mbuf *pkts[], uint16_t nb_pkts,
+		   uint16_t max_pkts __rte_unused,
+		   void *user_param __rte_unused)
+{
+	uint16_t i;
+
+	for (i = 0; i < nb_pkts; ++i)
+		parse_ptype(pkts[i]);
+
+	return nb_pkts;
+}
+
 static int
 init_routing_table(void)
 {
@@ -785,7 +852,7 @@ init_mem(void)
 			RTE_LOG(INFO, IP_FRAG, "Creating LPM6 table on socket %i\n", socket);
 			snprintf(buf, sizeof(buf), "IP_FRAG_LPM_%i", socket);
 
-			lpm6 = rte_lpm6_create("IP_FRAG_LPM6", socket, &lpm6_config);
+			lpm6 = rte_lpm6_create(buf, socket, &lpm6_config);
 			if (lpm6 == NULL) {
 				RTE_LOG(ERR, IP_FRAG, "Cannot create LPM table\n");
 				return -1;
@@ -824,9 +891,7 @@ main(int argc, char **argv)
 		rte_exit(EXIT_FAILURE, "Invalid arguments");
 
 	nb_ports = rte_eth_dev_count();
-	if (nb_ports > RTE_MAX_ETHPORTS)
-		nb_ports = RTE_MAX_ETHPORTS;
-	else if (nb_ports == 0)
+	if (nb_ports == 0)
 		rte_exit(EXIT_FAILURE, "No ports found!\n");
 
 	nb_lcores = rte_lcore_count();
@@ -947,6 +1012,12 @@ main(int argc, char **argv)
 				ret, portid);
 
 		rte_eth_promiscuous_enable(portid);
+
+		if (check_ptype(portid) == 0) {
+			rte_eth_add_rx_callback(portid, 0, cb_parse_ptype, NULL);
+			printf("Add Rx callback funciton to detect L3 packet type by SW :"
+				" port = %d\n", portid);
+		}
 	}
 
 	if (init_routing_table() < 0)