X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=lib%2Flibrte_eal%2Flinuxapp%2Fkni%2Fethtool%2Figb%2Fe1000_osdep.h;fp=lib%2Flibrte_eal%2Flinuxapp%2Fkni%2Fethtool%2Figb%2Fe1000_osdep.h;h=d1cf98e2c6e9d213918d080a3deabfe2b3f33e5a;hb=97f17497d162afdb82c8704bf097f0fee3724b2e;hp=0000000000000000000000000000000000000000;hpb=e04be89c2409570e0055b2cda60bd11395bb93b0;p=deb_dpdk.git

diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_osdep.h b/lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_osdep.h
new file mode 100644
index 00000000..d1cf98e2
--- /dev/null
+++ b/lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_osdep.h
@@ -0,0 +1,136 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2013 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/* glue for the OS independent part of e1000
+ * includes register access macros
+ */
+
+#ifndef _E1000_OSDEP_H_
+#define _E1000_OSDEP_H_
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+#include <linux/sched.h>
+#include "kcompat.h"
+
+#ifndef __INTEL_COMPILER
+#pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
+#define usec_delay(x) udelay(x)
+#define usec_delay_irq(x) udelay(x)
+#ifndef msec_delay
+#define msec_delay(x) do { \
+	/* Don't mdelay in interrupt context! */ \
+	if (in_interrupt()) \
+		BUG(); \
+	else \
+		msleep(x); \
+} while (0)
+
+/* Some workarounds require millisecond delays and are run during interrupt
+ * context.  Most notably, when establishing link, the phy may need tweaking
+ * but cannot process phy register reads/writes faster than millisecond
+ * intervals...and we establish link due to a "link status change" interrupt.
+ */
+#define msec_delay_irq(x) mdelay(x)
+#endif
+
+#define PCI_COMMAND_REGISTER   PCI_COMMAND
+#define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE
+#define ETH_ADDR_LEN           ETH_ALEN
+
+#ifdef __BIG_ENDIAN
+#define E1000_BIG_ENDIAN __BIG_ENDIAN
+#endif
+
+
+#ifdef DEBUG
+#define DEBUGOUT(S) printk(KERN_DEBUG S)
+#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S, ## A)
+#else
+#define DEBUGOUT(S)
+#define DEBUGOUT1(S, A...)
+#endif
+
+#ifdef DEBUG_FUNC
+#define DEBUGFUNC(F) DEBUGOUT(F "\n")
+#else
+#define DEBUGFUNC(F)
+#endif
+#define DEBUGOUT2 DEBUGOUT1
+#define DEBUGOUT3 DEBUGOUT2
+#define DEBUGOUT7 DEBUGOUT3
+
+#define E1000_REGISTER(a, reg) reg
+
+#define E1000_WRITE_REG(a, reg, value) ( \
+    writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg))))
+
+#define E1000_READ_REG(a, reg) (readl((a)->hw_addr + E1000_REGISTER(a, reg)))
+
+#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+    writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2))))
+
+#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
+    readl((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2)))
+
+#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY
+#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY
+
+#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \
+    writew((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1))))
+
+#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \
+    readw((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1)))
+
+#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \
+    writeb((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + (offset))))
+
+#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \
+    readb((a)->hw_addr + E1000_REGISTER(a, reg) + (offset)))
+
+#define E1000_WRITE_REG_IO(a, reg, offset) do { \
+    outl(reg, ((a)->io_base));                  \
+    outl(offset, ((a)->io_base + 4));      } while (0)
+
+#define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, E1000_STATUS)
+
+#define E1000_WRITE_FLASH_REG(a, reg, value) ( \
+    writel((value), ((a)->flash_address + reg)))
+
+#define E1000_WRITE_FLASH_REG16(a, reg, value) ( \
+    writew((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_FLASH_REG(a, reg) (readl((a)->flash_address + reg))
+
+#define E1000_READ_FLASH_REG16(a, reg) (readw((a)->flash_address + reg))
+
+#endif /* _E1000_OSDEP_H_ */