X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=resources%2Fapi%2Fvpp%2Fsupported_crcs.yaml;h=7ab19cc06f56aab05ca2bf0a8c3c0b38d6364e85;hb=b589630f2cc4f65d63618f3bdc117635a723db8a;hp=f2f07651e21835add3841dba24afa5bd13083e90;hpb=f99c79a4035787aff0db70498d022095caa44043;p=csit.git

diff --git a/resources/api/vpp/supported_crcs.yaml b/resources/api/vpp/supported_crcs.yaml
index f2f07651e2..7ab19cc06f 100644
--- a/resources/api/vpp/supported_crcs.yaml
+++ b/resources/api/vpp/supported_crcs.yaml
@@ -30,8 +30,8 @@
 # Use bash command "env LC_COLLATE=C sort -u" if not clear.
 
 # https://logs.fd.io/production/vex-yul-rot-jenkins-1
-# /vpp-merge-master-ubuntu1804/244/
-20.01-rc0~821:
+# /vpp-merge-master-ubuntu1804/251/
+20.01-rc0~828:
     acl_add_replace: '0x13bc8539'  # dev
     acl_add_replace_reply: '0xac407b0c'  # dev
     acl_details: '0xf89d7a88'  # perf teardown
@@ -99,15 +99,15 @@
     hw_interface_set_mtu_reply: '0xe8d4e804'  # dev
     input_acl_set_interface: '0xde7ad708'  # dev
     input_acl_set_interface_reply: '0xe8d4e804'  # dev
-    ip_address_details: '0x7002eee7'  # dev
-    ip_address_dump: '0x6b7bcd0a'  # dev
-    ip_neighbor_add_del: '0x029dad44'  # dev
+    ip_address_details: '0xb1199745'  # dev
+    ip_address_dump: '0x2d033de4'  # dev
+    ip_neighbor_add_del: '0x105518b6'  # dev
     ip_neighbor_add_del_reply: '0x1992deab'  # dev
     # ip_probe_neighbor / reply # unused L1 keyword vpp_ip_probe
-    ip_route_add_del: '0x5ceee41c'  # dev
+    ip_route_add_del: '0xc1ff832d'  # dev
     ip_route_add_del_reply: '0x1992deab'  # dev
     # ip_source_check_interface_add_del / reply # unused L1 keyword vpp_ip_source_check_setup
-    ip_table_add_del: '0xe5d378f2'  # dev
+    ip_table_add_del: '0x0ffdaec0'  # dev
     ip_table_add_del_reply: '0xe8d4e804'  # dev
     ipsec_interface_add_del_spd: '0x1e3b8286'  # dev
     ipsec_interface_add_del_spd_reply: '0xe8d4e804'  # dev
@@ -229,7 +229,7 @@
     sw_interface_details: '0x17b69fa2'  # dev setup
     sw_interface_dump: '0xaa610c27'  # dev setup
     # sw_interface_get_table / reply # honeycomb
-    sw_interface_ip6nd_ra_config: '0xc3f02daa'  # dev
+    sw_interface_ip6nd_ra_config: '0x3eb00b1c'  # dev
     sw_interface_ip6nd_ra_config_reply: '0xe8d4e804'  # dev
     sw_interface_rx_placement_details: '0xf6d7d024'  # perf
     sw_interface_rx_placement_dump: '0xf9e6675e'  # perf
@@ -255,12 +255,12 @@
     sw_interface_slave_dump: '0xf9e6675e'  # perf
     # ^^ see bond_*
     # sw_interface_span_dump / details # honeycomb
-    sw_interface_tap_v2_dump: '0x51077d14'  # dev
-    sw_interface_tap_v2_details: '0x5ee87a5f'  # dev
+    sw_interface_tap_v2_dump: '0xf9e6675e'  # dev
+    sw_interface_tap_v2_details: '0xe53c16de'  # dev
     sw_interface_vhost_user_details: '0x91ff3307'  # dev
     sw_interface_vhost_user_dump: '0x51077d14'  # dev
-    tap_create_v2: '0x8fa99320'  # dev
-    tap_create_v2_reply: '0xfda5941f'  # dev
+    tap_create_v2: '0x445835fd'  # dev
+    tap_create_v2_reply: '0x5383d31f'  # dev
     vxlan_add_del_tunnel: '0x00f4bdd0'  # dev
     vxlan_add_del_tunnel_reply: '0xfda5941f'  # dev
     # vxlan_gpe_tunnel_dump / details # honeycomb
@@ -269,8 +269,8 @@
 # Use bash command "env LC_COLLATE=C sort -u" if not clear.
 
 
-# https://gerrit.fd.io/r/c/vpp/+/21706
-21706/17:
+# https://gerrit.fd.io/r/c/vpp/+/22277
+22277/5:
     acl_add_replace: '0x13bc8539'  # dev
     acl_add_replace_reply: '0xac407b0c'  # dev
     acl_details: '0xf89d7a88'  # perf teardown
@@ -312,8 +312,8 @@
     create_subif_reply: '0x5383d31f'  # perf
     # ^^ tc01-64B-1c-dot1ad-l2xcbase-mrr
     # ^ 3n: dot1adANDl2xcfwd
-    create_vhost_user_if: '0xa3438cd4'  # dev
-    create_vhost_user_if_reply: '0xfda5941f'  # dev
+    create_vhost_user_if: '0x591ee951'  # dev
+    create_vhost_user_if_reply: '0x5383d31f'  # dev
     create_vlan_subif: '0xaf34ac8b'  # dev
     create_vlan_subif_reply: '0x5383d31f'  # dev
     # dhcp_proxy_dump / details # honeycomb
@@ -496,14 +496,16 @@
     # sw_interface_span_dump / details # honeycomb
     sw_interface_tap_v2_dump: '0xf9e6675e'  # dev
     sw_interface_tap_v2_details: '0xe53c16de'  # dev
-    sw_interface_vhost_user_details: '0x91ff3307'  # dev
-    sw_interface_vhost_user_dump: '0x51077d14'  # dev
+    sw_interface_vhost_user_details: '0x98530df1'  # dev
+    sw_interface_vhost_user_dump: '0xf9e6675e'  # dev
     tap_create_v2: '0x445835fd'  # dev
     tap_create_v2_reply: '0x5383d31f'  # dev
     vxlan_add_del_tunnel: '0x00f4bdd0'  # dev
     vxlan_add_del_tunnel_reply: '0xfda5941f'  # dev
     # vxlan_gpe_tunnel_dump / details # honeycomb
     # vxlan_tunnel_dump /details # unused L2 keyword: Get VXLAN dump
+# Please keep alphabetic order.
+# Use bash command "env LC_COLLATE=C sort -u" if not clear.
 
 
 # Hint to see the currently used command messages: