X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=resources%2Flibraries%2Fpython%2Fhoneycomb%2FIPv6Management.py;fp=resources%2Flibraries%2Fpython%2Fhoneycomb%2FIPv6Management.py;h=deec041103d809be5b1cbbf9f2f94ff0dc121f49;hb=442a2a7b0dfd2f1cd5a4ba03fb91ed32c96f8965;hp=0000000000000000000000000000000000000000;hpb=e65ba17d162581fa8b803070a5e706f344c30f33;p=csit.git

diff --git a/resources/libraries/python/honeycomb/IPv6Management.py b/resources/libraries/python/honeycomb/IPv6Management.py
new file mode 100644
index 0000000000..deec041103
--- /dev/null
+++ b/resources/libraries/python/honeycomb/IPv6Management.py
@@ -0,0 +1,147 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Keywords used for setup and testing of Honeycomb's control-plane interface
+using IPv6.
+"""
+
+from resources.libraries.python.ssh import SSH
+
+
+class IPv6Management(object):
+    """Utilities for managing IPv6 contol-plane interfaces."""
+
+    def __init__(self):
+        pass
+
+    @staticmethod
+    def get_interface_name_by_mac(node, mac):
+        """Get the name of an interface using its MAC address.
+
+        :param node: Node in topology.
+        :param mac: MAC address.
+        :type node: dict
+        :type mac: str
+        :returns: Name of the interface.
+        :rtype: str
+        :raises RuntimeError: If no interface is found.
+        """
+
+        cmd = " | ".join([
+            "fgrep -ls '{0}' /sys/class/net/*/address".format(mac),
+            "awk -F '/' '{print $5}'"
+        ])
+
+        ssh = SSH()
+        ssh.connect(node)
+        ret_code, stdout, _ = ssh.exec_command(cmd)
+
+        if ret_code == 0:
+            return stdout.strip()
+        else:
+            raise RuntimeError("No interface found using the specified MAC "
+                               "address.")
+
+    @staticmethod
+    def clear_interface_configuration(node, interface):
+        """Remove all configured IP addresses from the specified interface
+         and set it into down state.
+
+         :param node: Node in topology.
+         :param interface: Name of an interface on the node.
+         :type node: dict
+         :type interface: str
+         :raises RuntimeError: If the configuration could not be cleared.
+         """
+
+        cmd = " && ".join([
+            "sudo ip addr flush dev {interface}".format(interface=interface),
+            "sudo ip link set dev {interface} down".format(interface=interface)
+        ])
+
+        ssh = SSH()
+        ssh.connect(node)
+        ret_code, _, _ = ssh.exec_command(cmd)
+        if ret_code != 0:
+            raise RuntimeError("Could not clear interface configuration.")
+
+    @staticmethod
+    def set_management_interface_address(node, interface, address, prefix):
+        """Configure an IP address on the specified interface.
+
+        :param node: Node in topology.
+        :param interface: Name of an interface on the node.
+        :param address: IP address to configure.
+        :param prefix: IP network prefix.
+        :type node: dict
+        :type interface: str
+        :type address: str
+        :type prefix: int
+        :raises RuntimeError: If the configuration fails.
+        """
+
+        ssh = SSH()
+        ssh.connect(node)
+
+        # Enable IPv6 for only the specified interface
+        cmd = "sudo sysctl net.ipv6.conf.{0}.disable_ipv6=0".format(interface)
+
+        ret_code, _, _ = ssh.exec_command(cmd)
+        if ret_code != 0:
+            raise RuntimeError("Could not enable IPv6 on interface.")
+
+        # Configure IPv6 address on the interface
+        cmd = "sudo ip address add {address}/{prefix} dev {interface}".format(
+            interface=interface,
+            address=address,
+            prefix=prefix)
+
+        ret_code, _, _ = ssh.exec_command(cmd)
+        if ret_code != 0:
+            raise RuntimeError("Could not configure IP address on interface.")
+
+        # Set the interface up
+        cmd = "sudo ip link set {interface} up".format(interface=interface)
+
+        ret_code, _, _ = ssh.exec_command(cmd)
+        if ret_code != 0:
+            raise RuntimeError("Could not change the interface to 'up' state.")
+
+    @staticmethod
+    def configure_control_interface_tunnel(node, src_port, dst_ip, dst_port):
+        """Configure a tunnel on the specified node, tunelling any IPv4 traffic
+        from one port to the specified address.
+
+        :param node: Node in topology.
+        :param src_port: Port to tunnel traffic from.
+        :param dst_ip: IP address to tunnel traffic to.
+        :param dst_port: Port to tunnel traffic to.
+        :type node: dict
+        :type src_port: int
+        :type dst_ip: str
+        :type dst_port: int
+        :raises RuntimeError: If tunnel creation is not successful.
+        """
+
+        cmd = "nohup socat TCP4-LISTEN:{src_port},fork,su=nobody " \
+              "TCP6:[{dst_ip}]:{dst_port} $@ > " \
+              "/tmp/socat.log 2>&1 &".format(
+                  src_port=src_port,
+                  dst_ip=dst_ip,
+                  dst_port=dst_port)
+
+        ssh = SSH()
+        ssh.connect(node)
+        ret_code, _, _ = ssh.exec_command_sudo(cmd)
+        if ret_code != 0:
+            raise RuntimeError("Could not configure tunnel.")