X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fhoneycomb%2Fvxlan_gpe.robot;fp=resources%2Flibraries%2Frobot%2Fhoneycomb%2Fvxlan_gpe.robot;h=3850eb83fa2f50a60336a99d7d487d4a1f130ecf;hb=e8c787b699661f00e8358cc711bb20b8993dc87a;hp=0000000000000000000000000000000000000000;hpb=3744273d8f1540fe45312b5c3a4e2e6f8b21a81f;p=csit.git

diff --git a/resources/libraries/robot/honeycomb/vxlan_gpe.robot b/resources/libraries/robot/honeycomb/vxlan_gpe.robot
new file mode 100644
index 0000000000..3850eb83fa
--- /dev/null
+++ b/resources/libraries/robot/honeycomb/vxlan_gpe.robot
@@ -0,0 +1,190 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.InterfaceUtil
+| ...     | WITH NAME | interfaceCLI
+| Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords
+| ...     | WITH NAME | InterfaceAPI
+
+*** Variables ***
+# Translation table used to convert values received from Honeycomb to values
+# received from VAT.
+| &{protocols}=
+| ... | -=0
+| ... | ipv4=1
+| ... | ipv6=2
+| ... | ethernet=3
+| ... | nsh=4
+
+*** Keywords ***
+| Honeycomb creates VxLAN GPE interface
+| | [Documentation] | Uses Honeycomb API to configure a VxLAN tunnel.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface to be created. Type: string
+| | ... | - base_settings - configuration data common for all interfaces.\
+| | ... | Type: dictionary
+| | ... | - vxlan_gpe_settings - VxLAN GPE specific parameters. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ... | \| Honeycomb creates VxLAN GPE interface \
+| | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \| ${base_params} \
+| | ... | \| ${vxlan_gpe_params} \|
+| | ...
+| | [Arguments] | ${node} | ${interface}
+| | ... | ${base_settings} | ${vxlan_gpe_settings}
+| | ...
+| | interfaceAPI.Create VxLAN GPE interface
+| | ... | ${node} | ${interface} | &{base_settings} | &{vxlan_gpe_settings}
+
+| Honeycomb removes VxLAN GPE interface
+| | [Documentation] | Uses Honeycomb API to remove VxLAN GPE interface from\
+| | ... | node.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of the interface to be removed. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Honeycomb removes VxLAN GPE interface \
+| | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \|
+| | ...
+| | [Arguments] | ${node} | ${interface}
+| | ...
+| | interfaceAPI.Delete interface | ${node} | ${interface}
+
+| VxLAN GPE configuration from Honeycomb should be
+| | [Documentation] | Uses Honeycomb API to get operational data about the\
+| | ... | given interface and compares them to the values provided as arguments.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface to be checked. Type: string
+| | ... | - base_settings - configuration data common for all interfaces.\
+| | ... | Type: dictionary
+| | ... | - vxlan_gpe_settings - VxLAN GPE specific parameters. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ... | \| VxLAN GPE configuration from Honeycomb should be \
+| | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \| ${base_params} \
+| | ... | \| ${vxlan_gpe_params} \|
+| | ...
+| | [Arguments] | ${node} | ${interface}
+| | ... | ${base_settings} | ${vxlan_gpe_settings}
+| | ...
+| | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface}
+| | Should be equal as strings
+| | ... | ${api_data['name']} | ${base_settings['name']}
+| | Should be equal as strings
+| | ... | ${api_data['type']} | v3po:vxlan-gpe-tunnel
+| | Run keyword if | '${base_settings['enabled']}' == 'true'
+| | ... | Run keywords
+| | ... | Should be equal as strings | ${api_data['admin-status']} | up
+| | ... | AND
+| | ... | Should be equal as strings | ${api_data['oper-status']} | up
+| | ... | ELSE
+| | ... | Run keywords
+| | ... | Should be equal as strings | ${api_data['admin-status']} | down
+| | ... | AND
+| | ... | Should be equal as strings | ${api_data['oper-status']} | down
+
+| VxLAN GPE configuration from VAT should be
+| | [Documentation] | Uses VAT to get operational data about the given\
+| | ... | interface and compares them to the values provided as arguments.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface to be checked. Type: string
+| | ... | - vxlan_gpe_settings - VxLAN GPE specific parameters. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ... | \| VxLAN GPE configuration from VAT should be \
+| | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \| ${vxlan_gpe_params} \|
+| | ...
+| | [Arguments] | ${node} | ${interface} | ${vxlan_gpe_params}
+| | ...
+| | ${vat_data}= | VxLAN GPE Dump | ${node} | ${interface}
+| | Should be equal as strings
+| | ... | ${vat_data['local']} | ${vxlan_gpe_params['local']}
+| | Should be equal as strings
+| | ... | ${vat_data['remote']} | ${vxlan_gpe_params['remote']}
+| | Should be equal as strings
+| | ... | ${vat_data['vni']} | ${vxlan_gpe_params['vni']}
+| | Should be equal as strings
+| | ... | ${vat_data['encap_vrf_id']} | ${vxlan_gpe_params['encap-vrf-id']}
+| | Should be equal as strings
+| | ... | ${vat_data['decap_vrf_id']} | ${vxlan_gpe_params['decap-vrf-id']}
+| | Should be equal as strings | ${vat_data['protocol']}
+| | ... | ${protocols['${vxlan_gpe_params['next-protocol']}']}
+
+| Interface indices should be the same from Honeycomb and VAT
+| | [Documentation] | Uses VAT and Honeycomb to get operational data about the\
+| | ... | given interface and compares the interface indexes.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of the interface to be checked. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Interface indices should be the same from Honeycomb and VAT \
+| | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \|
+| | ...
+| | [Arguments] | ${node} | ${interface}
+| | ...
+| | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface}
+| | ${vat_data}= | VxLAN GPE Dump | ${node} | ${interface}
+| | Should be equal as strings
+| | ... | ${api_data['if-index']} | ${vat_data['sw_if_index']}
+
+| VxLAN GPE configuration from VAT should be empty
+| | [Documentation] | Uses VAT to get operational data about the given\
+| | ... | interface and expects empty dictionary.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ... | \| VxLAN GPE configuration from VAT should be empty\
+| | ... | \| ${nodes['DUT1']} \|
+| | ...
+| | [Arguments] | ${node}
+| | ...
+| | Run Keyword And Expect Error | ValueError: No JSON object could be decoded
+| | ... | VxLAN Dump | ${node}
+
+| Honeycomb fails to create VxLAN GPE interface
+| | [Documentation] | Uses Honeycomb API to configure a VxLAN tunnel with wrong\
+| | ... | configuration data.
+| | ...
+| | ... | *Arguments:*
+| | ... | - node - information about a DUT node. Type: dictionary
+| | ... | - interface - name of an interface to be created. Type: string
+| | ... | - base_settings - Configuration data common for all interfaces.\
+| | ... | Type: dictionary
+| | ... | - vxlan_gpe_settings - VxLAN GPE specific parameters. Type: dictionary
+| | ...
+| | ... | *Example:*
+| | ... | \| Honeycomb fails to create VxLAN GPE interface \
+| | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \| ${wrong_base_params} \
+| | ... | \| ${vxlan_gpe_params} \|
+| | ...
+| | [Arguments] | ${node} | ${interface}
+| | ... | ${base_settings} | ${vxlan_gpe_settings}
+| | ...
+| | Run keyword and expect error | *HoneycombError*not successful. * code: *00.
+| | ... | interfaceAPI.Create VxLAN GPE interface
+| | ... | ${node} | ${interface} | &{base_settings} | &{vxlan_gpe_settings}