X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fipsec.robot;fp=resources%2Flibraries%2Frobot%2Fipsec.robot;h=0000000000000000000000000000000000000000;hb=6721e7f09aa95bff6622068332a3f56afad9c87b;hp=73f7179f300bbd3fe2dd17e8caa6e913ec81d2de;hpb=859157b5db45927c7b4bb0b2d575e68805777a86;p=csit.git

diff --git a/resources/libraries/robot/ipsec.robot b/resources/libraries/robot/ipsec.robot
deleted file mode 100644
index 73f7179f30..0000000000
--- a/resources/libraries/robot/ipsec.robot
+++ /dev/null
@@ -1,280 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Library | resources.libraries.python.IPsecUtil
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.TrafficScriptExecutor
-| Library | resources.libraries.python.IPv4Util.IPv4Util
-| Library | resources.libraries.python.InterfaceUtil
-| Library | resources.libraries.python.Routing
-| Library | String
-| Library | resources.libraries.python.IPv6Util
-| Library | resources.libraries.python.IPv6Setup
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
-| ...     | WITH NAME | dut1_v4
-| Documentation | *IPsec keywords.*
-
-*** Keywords ***
-| Generate keys for IPSec
-| | [Documentation] | Generate keys for IPsec.
-| | ...
-| | ... | *Arguments:*
-| | ... | - crypto_alg - Encryption algorithm. Type: enum
-| | ... | - integ_alg - Integrity algorithm. Type: enum
-| | ...
-| | ... | _NOTE:_ This KW sets following test case variable:
-| | ... | - encr_key - Encryption key. Type: string
-| | ... | - auth_key - Integrity key. Type: string
-| | ...
-| | ... | *Example:*
-| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \|
-| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \|
-| | ... | \| Generate keys for IPSec \| ${encr_alg} \| ${auth_alg} \|
-| | [Arguments] | ${crypto_alg} | ${integ_alg}
-| | ${encr_key_len}= | Get Crypto Alg Key Len | ${crypto_alg}
-| | ${encr_key}= | Generate Random String | ${encr_key_len}
-| | ${auth_key_len}= | Get Integ Alg Key Len | ${integ_alg}
-| | ${auth_key}= | Generate Random String | ${auth_key_len}
-| | Set Test Variable | ${encr_key}
-| | Set Test Variable | ${auth_key}
-
-| Configure path for IPSec test
-| | [Documentation] | Setup path for IPsec testing TG<-->DUT1.
-| | ...
-| | ... | _NOTE:_ This KW sets following test case variable:
-| | ... | - tg_node - TG node. Type: dictionary
-| | ... | - tg_if - TG interface connected to DUT. Type: string
-| | ... | - tg_if_mac - TG interface MAC. Type: string
-| | ... | - dut_node - DUT node. Type: dictionary
-| | ... | - dut_if - DUT interface connected to TG. Type: string
-| | ... | - dut_if_mac - DUT interface MAC. Type: string
-| | ... | - dut_lo - DUT loopback interface. Type: string
-| | ...
-| | ... | *Example:*
-| | ... | \| Configure path for IPSec test \|
-| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']}
-| | Compute Path
-| | ${tg_if} | ${tg_node}= | Next Interface
-| | ${dut_if} | ${dut_node}= | Next Interface
-| | ${dut_if_mac}= | Get Interface Mac | ${dut_node} | ${dut_if}
-| | ${tg_if_mac}= | Get Interface Mac | ${tg_node} | ${tg_if}
-| | ${dut_lo}= | Vpp Create Loopback | ${dut_node}
-| | Set Interface State | ${dut_node} | ${dut_if} | up
-| | Set Interface State | ${dut_node} | ${dut_lo} | up
-| | Vpp Node Interfaces Ready Wait | ${dut_node}
-| | Set Test Variable | ${tg_node}
-| | Set Test Variable | ${tg_if}
-| | Set Test Variable | ${tg_if_mac}
-| | Set Test Variable | ${dut_node}
-| | Set Test Variable | ${dut_if}
-| | Set Test Variable | ${dut_if_mac}
-| | Set Test Variable | ${dut_lo}
-
-| Configure topology for IPv4 IPsec testing
-| | [Documentation] | Setup topology for IPv4 IPsec testing.
-| | ...
-| | ... | _NOTE:_ This KW sets following test case variable:
-| | ... | - dut_tun_ip - DUT tunnel IP address. Type: string
-| | ... | - dut_src_ip - DUT source IP address. Type: string
-| | ... | - tg_tun_ip - TG tunnel IP address. Type: string
-| | ... | - tg_src_ip - TG source IP address. Type: string
-| | ...
-| | ... | *Example:*
-| | ... | \| Configure topology for IPv4 IPsec testing \|
-| | Configure path for IPSec test
-| | Set Interface Address | ${dut_node} | ${dut_if} | ${dut_if_ip4}
-| | ... | ${ip4_plen}
-| | Set Interface Address | ${dut_node} | ${dut_lo} | ${dut_lo_ip4}
-| | ... | ${ip4_plen}
-| | dut1_v4.Set Arp | ${dut_if} | ${tg_if_ip4} | ${tg_if_mac}
-| | Vpp Route Add | ${dut_node} | ${tg_lo_ip4} | ${ip4_plen} | ${tg_if_ip4}
-| | ... | ${dut_if}
-| | Set Test Variable | ${dut_tun_ip} | ${dut_if_ip4}
-| | Set Test Variable | ${dut_src_ip} | ${dut_lo_ip4}
-| | Set Test Variable | ${tg_tun_ip} | ${tg_if_ip4}
-| | Set Test Variable | ${tg_src_ip} | ${tg_lo_ip4}
-
-| Configure topology for IPv6 IPsec testing
-| | [Documentation] | Setup topology fo IPv6 IPsec testing.
-| | ...
-| | ... | _NOTE:_ This KW sets following test case variable:
-| | ... | - dut_tun_ip - DUT tunnel IP address. Type: string
-| | ... | - dut_src_ip - DUT source IP address. Type: string
-| | ... | - tg_tun_ip - TG tunnel IP address. Type: string
-| | ... | - tg_src_ip - TG source IP address. Type: string
-| | ...
-| | ... | *Example:*
-| | ... | \| Configure topology for IPv6 IPsec testing \|
-| | Configure path for IPSec test
-| | VPP Set If IPv6 Addr | ${dut_node} | ${dut_if} | ${dut_if_ip6} | ${ip6_plen}
-| | VPP Set If IPv6 Addr | ${dut_node} | ${dut_lo} | ${dut_lo_ip6} | ${ip6_plen}
-| | Add IP Neighbor | ${dut_node} | ${dut_if} | ${tg_if_ip6} | ${tg_if_mac}
-| | Vpp All RA Suppress Link Layer | ${nodes}
-| | Vpp Route Add | ${dut_node} | ${tg_lo_ip6} | ${ip6_plen_rt} | ${tg_if_ip6}
-| | ... | ${dut_if}
-| | Set Test Variable | ${dut_tun_ip} | ${dut_if_ip6}
-| | Set Test Variable | ${dut_src_ip} | ${dut_lo_ip6}
-| | Set Test Variable | ${tg_tun_ip} | ${tg_if_ip6}
-| | Set Test Variable | ${tg_src_ip} | ${tg_lo_ip6}
-
-| Configure manual keyed connection for IPSec
-| | [Documentation] | Setup IPsec manual keyed connection on VPP node.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - VPP node to setup IPsec on. Type: dictionary
-| | ... | - interface - Interface to enable IPsec on. Type: string
-| | ... | - crypto_alg - Encrytion algorithm. Type: enum
-| | ... | - crypto_key - Encryption key. Type: string
-| | ... | - integ_alg - Integrity algorithm. Type: enum
-| | ... | - integ_key - Integrity key. Type: string
-| | ... | - l_spi - Local SPI. Type: integer
-| | ... | - r_spi - Remote SPI. Type: integer
-| | ... | - l_ip - Local IP address. Type: string
-| | ... | - r_ip - Remote IP address. Type: string
-| | ... | - l_tunnel - Local tunnel IP address (optional). Type: string
-| | ... | - r_tunnel - Remote tunnel IP address (optional). Type: string
-| | ...
-| | ... | _NOTE:_ This KW sets following test case variables:
-| | ... | - l_sa_id
-| | ... | - r_sa_id
-| | ...
-| | ... | *Example:*
-| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \|
-| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \|
-| | ... | \| Configure manual keyed connection for IPSec \| ${nodes['DUT1']} \
-| | ... | \| GigabitEthernet0/8/0 \| ${encr_alg} \| sixteenbytes_key \
-| | ... | \| ${auth_alg} \| twentybytessecretkey \| ${1000} \| ${1001} \
-| | ... | \| 192.168.4.4 \| 192.168.3.3 \| 192.168.100.3 \| 192.168.100.2 \|
-| | [Arguments] | ${node} | ${interface} | ${crypto_alg} | ${crypto_key}
-| | ... | ${integ_alg} | ${integ_key} | ${l_spi} | ${r_spi} | ${l_ip}
-| | ... | ${r_ip} | ${l_tunnel}=${None} | ${r_tunnel}=${None}
-| | Set Test Variable | ${l_sa_id} | ${10}
-| | Set Test Variable | ${r_sa_id} | ${20}
-| | ${spd_id}= | Set Variable | ${1}
-| | ${p_hi}= | Set Variable | ${100}
-| | ${p_lo}= | Set Variable | ${10}
-| | VPP IPsec Add SAD Entry | ${node} | ${l_sa_id} | ${l_spi} | ${crypto_alg}
-| | ... | ${crypto_key} | ${integ_alg} | ${integ_key}
-| | ... | ${l_tunnel} | ${r_tunnel}
-| | VPP IPsec Add SAD Entry | ${node} | ${r_sa_id} | ${r_spi} | ${crypto_alg}
-| | ... | ${crypto_key} | ${integ_alg} | ${integ_key}
-| | ... | ${r_tunnel} | ${l_tunnel}
-| | VPP IPsec Add SPD | ${node} | ${spd_id}
-| | VPP IPsec SPD Add If | ${node} | ${spd_id} | ${interface}
-| | ${action}= | Policy Action Bypass
-| | VPP IPsec SPD Add Entry | ${node} | ${spd_id} | ${p_hi} | ${action}
-| | ... | inbound=${TRUE} | proto=${ESP_PROTO}
-| | VPP IPsec SPD Add Entry | ${node} | ${spd_id} | ${p_hi} | ${action}
-| | ... | inbound=${FALSE} | proto=${ESP_PROTO}
-| | ${action}= | Policy Action Protect
-| | VPP IPsec SPD Add Entry | ${node} | ${spd_id} | ${p_lo} | ${action}
-| | ... | sa_id=${r_sa_id} | laddr_range=${l_ip}
-| | ... | raddr_range=${r_ip} | inbound=${TRUE}
-| | VPP IPsec SPD Add Entry | ${node} | ${spd_id} | ${p_lo} | ${action}
-| | ... | sa_id=${l_sa_id} | laddr_range=${l_ip}
-| | ... | raddr_range=${r_ip} | inbound=${FALSE}
-
-| Update IPSec SA keys
-| | [Documentation] | Update IPsec SA keys on VPP node.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - VPP node to update SA keys. Type: dictionary
-| | ... | - l_sa_id - Local SA ID. Type: string
-| | ... | - r_sa_id - Remote SA ID. Type: string
-| | ... | - crypto_key - Encryption key. Type: string
-| | ... | - integ_key - Integrity key. Type: string
-| | ...
-| | ... | *Example:*
-| | ... | \| Update IPSec SA keys \| ${nodes['DUT1']} \
-| | ... | \| 10 \| 20 \| sixteenbytes_key \| twentybytessecretkey \|
-| | [Arguments] | ${node} | ${l_sa_id} | ${r_sa_id} | ${crypto_key}
-| | ... | ${integ_key}
-| | VPP IPsec SA Set Key | ${dut_node} | ${l_sa_id} | ${crypto_key}
-| | ... | ${integ_key}
-| | VPP IPsec SA Set Key | ${dut_node} | ${r_sa_id} | ${crypto_key}
-| | ... | ${integ_key}
-
-| Send IPsec Packet and verify ESP encapsulation in received packet
-| | [Documentation] | Send IPsec packet from TG to DUT. Receive IPsec packet\
-| | ... | from DUT on TG and verify ESP encapsulation.
-| | ...
-| | ... | *Arguments:*
-| | ... | - node - TG node. Type: dictionary
-| | ... | - interface - TG Interface. Type: string
-| | ... | - dst_mac - Destination MAC. Type: string
-| | ... | - crypto_alg - Encrytion algorithm. Type: enum
-| | ... | - crypto_key - Encryption key. Type: string
-| | ... | - integ_alg - Integrity algorithm. Type: enum
-| | ... | - integ_key - Integrity key. Type: string
-| | ... | - l_spi - Local SPI. Type: integer
-| | ... | - r_spi - Remote SPI. Type: integer
-| | ... | - l_ip - Local IP address. Type: string
-| | ... | - r_ip - Remote IP address. Type: string
-| | ... | - l_tunnel - Local tunnel IP address (optional). Type: string
-| | ... | - r_tunnel - Remote tunnel IP address (optional). Type: string
-| | ...
-| | ... | *Example:*
-| | ... | \| ${encr_alg}= \| Crypto Alg AES CBC 128 \|
-| | ... | \| ${auth_alg}= \| Integ Alg SHA1 96 \|
-| | ... | \| Send IPsec Packet and verify ESP encapsulation in received packet\
-| | ... | \| ${nodes['TG']} \| eth1 \
-| | ... | \| 52:54:00:d4:d8:22 \| ${encr_alg} \| sixteenbytes_key \
-| | ... | \| ${auth_alg} \| twentybytessecretkey \| ${1001} \| ${1000} \
-| | ... | \| 192.168.3.3 \| 192.168.4.4 \| 192.168.100.2 \| 192.168.100.3 \|
-| | [Arguments] | ${node} | ${interface} | ${dst_mac} | ${crypto_alg}
-| | ... | ${crypto_key} | ${integ_alg} | ${integ_key} | ${l_spi}
-| | ... | ${r_spi} | ${l_ip} | ${r_ip} | ${l_tunnel}=${None}
-| | ... | ${r_tunnel}=${None}
-| | ${src_mac}= | Get Interface Mac | ${node} | ${interface}
-| | ${if_name}= | Get Interface Name | ${node} | ${interface}
-| | ${args}= | Traffic Script Gen Arg | ${if_name} | ${if_name} | ${src_mac}
-| | ... | ${dst_mac} | ${l_ip} | ${r_ip}
-| | ${crypto_alg_str}= | Get Crypto Alg Scapy Name | ${crypto_alg}
-| | ${integ_alg_str}= | Get Integ Alg Scapy Name | ${integ_alg}
-| | ${args}= | Catenate | ${args} | --crypto_alg ${crypto_alg_str}
-| | ... | --crypto_key ${crypto_key} | --integ_alg ${integ_alg_str}
-| | ... | --integ_key ${integ_key} | --l_spi ${l_spi} | --r_spi ${r_spi}
-| | ${args}= | Set Variable If | "${l_tunnel}" == "${None}" | ${args}
-| | ... | ${args} --src_tun ${l_tunnel}
-| | ${args}= | Set Variable If | "${r_tunnel}" == "${None}" | ${args}
-| | ... | ${args} --dst_tun ${r_tunnel}
-| | Run Traffic Script On Node | ipsec.py | ${node} | ${args}
-
-| Set up IPv4 IPSec functional test
-| | [Documentation]
-| | ... | Set up IPv4 IPSec functional test
-| | ...
-| | Set up functional test
-| | Configure topology for IPv4 IPsec testing
-
-| Set up IPv6 IPSec functional test
-| | [Documentation]
-| | ... | Set up IPv6 IPSec functional test
-| | ...
-| | Set up functional test
-| | Configure topology for IPv6 IPsec testing
-
-| Tear down IPSec functional test
-| | [Documentation]
-| | ... | Tear down IPSec functional test
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Tear down IPSec functional test \| ${dut_node} \|
-| | ...
-| | [Arguments] | ${dut_node}
-| | ...
-| | VPP IPsec Show | ${dut_node}
-| | Tear down functional test