X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=resources%2Flibraries%2Frobot%2Fperformance%2Fperformance_configuration.robot;h=09382d736e893a62deb68ce7f890b031450c5c22;hb=42fdef709bc1b1b557ce6f74609c729ac00ab8c3;hp=b78ede38ef5f530a8086961e56e1b01834549079;hpb=402633a25be55e418534161ac2a06bf09b4747b6;p=csit.git diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index b78ede38ef..09382d736e 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -12,108 +12,18 @@ # limitations under the License. *** Settings *** -| Library | Collections -| Library | String -| Library | resources.libraries.python.Classify.Classify | Library | resources.libraries.python.DpdkUtil | Library | resources.libraries.python.InterfaceUtil | Library | resources.libraries.python.IPUtil -| Library | resources.libraries.python.L2Util | Library | resources.libraries.python.NodePath -| Library | resources.libraries.python.topology.Topology | Library | resources.libraries.python.TestConfig | Library | resources.libraries.python.TrafficGenerator | Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl | Library | resources.libraries.python.VhostUser | ... -| Resource | resources/libraries/robot/ip/ip4.robot -| Resource | resources/libraries/robot/ip/ip6.robot -| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot -| Resource | resources/libraries/robot/l2/l2_patch.robot -| Resource | resources/libraries/robot/l2/l2_xconnect.robot -| Resource | resources/libraries/robot/l2/tagging.robot -| Resource | resources/libraries/robot/overlay/srv6.robot -| Resource | resources/libraries/robot/shared/counters.robot -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/shared/interfaces.robot -| ... | Documentation | Performance suite keywords - configuration *** Keywords *** -| Set interfaces in path up -| | [Documentation] -| | ... | *Set UP state on VPP interfaces in path on all DUT nodes and set -| | ... | maximal MTU.* -| | ... -# TODO: Rework KW to set all interfaces in path UP and set MTU (including -# software interfaces. Run KW at the start phase of VPP setup to split -# from other "functional" configuration. This will allow modularity of this -# library -| | :FOR | ${dut} | IN | @{duts} -| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error -| | | ... | Variable Should Exist | ${${dut}_if1} -| | | Run Keyword If | '${if1_status}' == 'PASS' -| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up -| | | ... | ELSE -| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_1} | up -| | | Run Keyword Unless | '${if1_status}' == 'PASS' -| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_2} | up -| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error -| | | ... | Variable Should Exist | ${${dut}_if2} -| | | Run Keyword If | '${if2_status}' == 'PASS' -| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2} | up -| | | ... | ELSE -| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_1} | up -| | | Run Keyword Unless | '${if2_status}' == 'PASS' -| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_2} | up -| | :FOR | ${dut} | IN | @{duts} -| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error -| | | ... | Variable Should Exist | ${${dut}_if1} -| | | Run Keyword If | '${if1_status}' == 'PASS' -| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1} -| | | ... | ELSE -| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_1} -| | | Run Keyword Unless | '${if1_status}' == 'PASS' -| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_2} -| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error -| | | ... | Variable Should Exist | ${${dut}_if2} -| | | Run Keyword If | '${if2_status}' == 'PASS' -| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2} -| | | ... | ELSE -| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_1} -| | | Run Keyword Unless | '${if2_status}' == 'PASS' -| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_2} -| | All VPP Interfaces Ready Wait | ${nodes} | retries=${300} - -| Set single interfaces in path up -| | [Documentation] -| | ... | *Set UP state on single VPP interfaces in path on all DUT nodes and set -| | ... | maximal MTU.* -| | ... -# TODO: Rework KW to set all interfaces in path UP and set MTU (including -# software interfaces. Run KW at the start phase of VPP setup to split -# from other "functional" configuration. This will allow modularity of this -# library -| | :FOR | ${dut} | IN | @{duts} -| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error -| | | ... | Variable Should Exist | ${${dut}_if1} -| | | Run Keyword If | '${if1_status}' == 'PASS' -| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up -| | | ... | ELSE -| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_1} | up -| | | Run Keyword Unless | '${if1_status}' == 'PASS' -| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_2} | up -| | :FOR | ${dut} | IN | @{duts} -| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error -| | | ... | Variable Should Exist | ${${dut}_if1} -| | | Run Keyword If | '${if1_status}' == 'PASS' -| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1} -| | | ... | ELSE -| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_1} -| | | Run Keyword Unless | '${if1_status}' == 'PASS' -| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_2} -| | All VPP Interfaces Ready Wait | ${nodes} - | Initialize IPSec in 3-node circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular @@ -124,18 +34,6 @@ | | ... | address. | | ... | | Set interfaces in path up -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if1_mac}= | Get Interface MAC | ${dut1} | ${dut1_if1} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | ${dut2_if2_mac}= | Get Interface MAC | ${dut2} | ${dut2_if2} -| | Set Test Variable | ${tg_if1_mac} -| | Set Test Variable | ${tg_if2_mac} -| | Set Test Variable | ${dut1_if1_mac} -| | Set Test Variable | ${dut1_if2_mac} -| | Set Test Variable | ${dut2_if1_mac} -| | Set Test Variable | ${dut2_if2_mac} | | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | | ... | ${dut1_if1_ip4} | 24 | | VPP Interface Set IP Address | ${dut2} | ${dut2_if2} @@ -147,214 +45,6 @@ | | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | gateway=${tg_if2_ip4} | | ... | interface=${dut2_if2} -| Initialize IPv6 forwarding in circular topology -| | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node -| | ... | circular topology. Get the interface MAC addresses and setup neighbor -| | ... | on all VPP interfaces. Setup IPv6 addresses with /64 prefix on DUT-TG -| | ... | links. In case of 3-node topology setup IPv6 adresses with /64 prefix -| | ... | on DUT1-DUT2 link and set routing on both DUT nodes with prefix /64 -| | ... | and next hop of neighbour DUT interface IPv4 address. -| | ... -| | ... | *Arguments:* -| | ... | - remote_host1_ip - IP address of remote host1 (Optional). -| | ... | Type: string -| | ... | - remote_host2_ip - IP address of remote host2 (Optional). -| | ... | Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize IPv6 forwarding in circular topology \ -| | ... | \| 3ffe:5f::1 \| 3ffe:5f::2 \| -| | ... -| | [Arguments] | ${remote_host1_ip}=${NONE} | ${remote_host2_ip}=${NONE} -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if2} | 2001:3::1 | ${dut2_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if1} | 2001:3::2 | ${dut1_if2_mac} -| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2} -| | ... | ELSE | Set Variable | ${dut1} -| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2_if2} -| | ... | ELSE | Set Variable | ${dut1_if2} -| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2001:2::2 | ${tg_if2_mac} -| | ... -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2001:1::1 | 64 -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 2001:3::1 | 64 -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 2001:3::2 | 64 -| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2001:2::1 | 64 -| | ... -| | Suppress ICMPv6 router advertisement message | ${nodes} -| | ... -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut1} | 2001:2::0 | 64 | gateway=2001:3::2 -| | ... | interface=${dut1_if2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | 2001:1::0 | 64 | gateway=2001:3::1 -| | ... | interface=${dut2_if1} -| | ... -| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}' -| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 128 -| | ... | gateway=2001:1::2 | interface=${dut1_if1} -| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}' -| | ... | Vpp Route Add | ${dut} | ${remote_host2_ip} | 128 -| | ... | gateway=2001:2::2 | interface=${dut_if2} -| | Run Keyword Unless | '${remote_host1_ip}' == '${NONE}' -| | ... | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut1} | ${remote_host1_ip} | 128 -| | ... | gateway=2001:3::2 | interface=${dut1_if2} -| | Run Keyword Unless | '${remote_host2_ip}' == '${NONE}' -| | ... | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | ${remote_host2_ip} | 128 -| | ... | gateway=2001:3::1 | interface=${dut2_if1} - -| Initialize IPv6 forwarding with scaling in circular topology -| | [Documentation] -| | ... | Custom setup of IPv6 topology with scalability of ip routes on all -| | ... | DUT nodes in 2-node / 3-node circular topology -| | ... -| | ... | *Arguments:* -| | ... | - count - IP route count. Type: integer -| | ... -| | ... | *Return:* -| | ... | - No value returned -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize IPv6 forwarding with scaling in circular \ -| | ... | topology \| 100000 \| -| | ... -| | [Arguments] | ${count} -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Get Interface MAC | ${dut2} | ${dut2_if1} -| | ${prefix}= | Set Variable | 64 -| | ${host_prefix}= | Set Variable | 128 -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2001:3::1 | ${prefix} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address -| | ... | ${dut1} | ${dut1_if2} | 2001:4::1 | ${prefix} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Interface Set IP Address -| | ... | ${dut2} | ${dut2_if1} | 2001:4::2 | ${prefix} -| | ${dut}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2} -| | ... | ELSE | Set Variable | ${dut1} -| | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | ${dut2_if2} -| | ... | ELSE | Set Variable | ${dut1_if2} -| | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2001:5::1 | ${prefix} -| | Suppress ICMPv6 router advertisement message | ${nodes} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:3::2 | ${tg1_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add Ip Neighbor -| | ... | ${dut1} | ${dut1_if2} | 2001:4::2 | ${dut2_if1_mac} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | VPP Add Ip Neighbor -| | ... | ${dut2} | ${dut2_if1} | 2001:4::1 | ${dut1_if2_mac} -| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2001:5::2 | ${tg1_if2_mac} -| | Vpp Route Add | ${dut1} | 2001:1::0 | ${host_prefix} | gateway=2001:3::2 -| | ... | interface=${dut1_if1} | count=${count} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut1} | 2001:2::0 | ${host_prefix} -| | ... | gateway=2001:4::2 | interface=${dut1_if2} | count=${count} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Vpp Route Add | ${dut2} | 2001:1::0 | ${host_prefix} -| | ... | gateway=2001:4::1 | interface=${dut2_if1} | count=${count} -| | Vpp Route Add | ${dut} | 2001:2::0 | ${host_prefix} | gateway=2001:5::2 -| | ... | interface=${dut_if2} | count=${count} - -| Initialize IPv6 forwarding with vhost in 2-node circular topology -| | [Documentation] -| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on \ -| | ... | VPP node. Set UP state of all VPP interfaces in path. Create \ -| | ... | nf_nodes+1 FIB tables on DUT with multipath routing. Assign each \ -| | ... | Virtual interface to FIB table with Physical interface or Virtual \ -| | ... | interface on both nodes. Setup IPv6 addresses with /64 prefix on \ -| | ... | DUT-TG links. Set routing on DUT nodes in all FIB tables with \ -| | ... | prefix /64 and next hop of neighbour IPv6 address. Setup neighbours \ -| | ... | on all VPP interfaces. -| | ... -| | ... | *Arguments:* -| | ... | - nf_nodes - Number of guest VMs. Type: integer -| | ... -| | ... | *Note:* -| | ... | Socket paths for VM are defined in following format: -| | ... | - /var/run/vpp/sock-${VM_ID}-1 -| | ... | - /var/run/vpp/sock-${VM_ID}-2 -| | ... -| | ... | *Example:* -| | ... -| | ... | \| IPv6 forwarding with Vhost-User initialized in a 2-node circular\ -| | ... | topology \| 1 \| -| | ... -| | [Arguments] | ${nf_nodes}=${1} -| | ... -| | Suppress ICMPv6 router advertisement message | ${nodes} -| | Set interfaces in path up -| | ${prefix}= | Set Variable | 64 -| | ${fib_table_1}= | Set Variable | ${101} -| | ${fib_table_2}= | Evaluate | ${fib_table_1}+${nf_nodes} -| | Add Fib Table | ${dut1} | ${fib_table_1} | ipv6=${True} -| | Add Fib Table | ${dut1} | ${fib_table_2} | ipv6=${True} -| | Assign Interface To Fib Table | ${dut1} | ${dut1_if1} | ${fib_table_1} -| | ... | ipv6=${True} -| | Assign Interface To Fib Table | ${dut1} | ${dut1_if2} | ${fib_table_2} -| | ... | ipv6=${True} -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2001:100::1 -| | ... | ${prefix} -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 2001:200::1 -| | ... | ${prefix} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:100::2 | ${tg_if1_mac} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 2001:200::2 | ${tg_if2_mac} -| | Vpp Route Add | ${dut1} | 2001:1::0 | 64 | gateway=2001:100::2 -| | ... | interface=${dut1_if1} | vrf=${fib_table_1} -| | Vpp Route Add | ${dut1} | 2001:2::0 | 64 | gateway=2001:200::2 -| | ... | interface=${dut1_if2} | vrf=${fib_table_2} -| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1 -| | | ${fib_table_1}= | Evaluate | ${100}+${number} -| | | ${fib_table_2}= | Evaluate | ${fib_table_1}+${1} -| | | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | | ... | /var/run/vpp/sock-${number}-1 | /var/run/vpp/sock-${number}-2 -| | | ... | dut1-vhost-${number}-if1 | dut1-vhost-${number}-if2 -| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if1} | up -| | | Set Interface State | ${dut1} | ${dut1-vhost-${number}-if2} | up -| | | Add Fib Table | ${dut1} | ${fib_table_1} | ipv6=${True} -| | | Add Fib Table | ${dut1} | ${fib_table_2} | ipv6=${True} -| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if1} -| | | ... | ${fib_table_1} | ipv6=${True} -| | | Assign Interface To Fib Table | ${dut1} | ${dut1-vhost-${number}-if2} -| | | ... | ${fib_table_2} | ipv6=${True} -| | | VPP Interface Set IP Address -| | | ... | ${dut1} | ${dut1-vhost-${number}-if1} | 1:1::2 | 64 -| | | VPP Interface Set IP Address -| | | ... | ${dut1} | ${dut1-vhost-${number}-if2} | 1:2::2 | 64 -| | | Vpp Route Add | ${dut1} | 2001:2::0 | 64 | gateway=1:1::1 -| | | ... | interface=${dut1-vhost-${number}-if1} | vrf=${fib_table_1} -| | | Vpp Route Add | ${dut1} | 2001:1::0 | 64 | gateway=1:2::1 -| | | ... | interface=${dut1-vhost-${number}-if2} | vrf=${fib_table_2} - | Initialize IPv6 forwarding with VLAN dot1q sub-interfaces in circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node @@ -406,13 +96,7 @@ | | ... | | ${prefix}= | Set Variable | 64 | | ${host_prefix}= | Set Variable | 64 -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Get Interface MAC | ${dut2} | ${dut2_if1} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2002:1::1 | ${tg1_if1_mac} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2002:1::1 | ${tg_if1_mac} | | Run Keyword If | '${dut2_status}' == 'PASS' | | ... | VPP Add Ip Neighbor | | ... | ${dut1} | ${subif_index_1} | 2002:2::2 | ${dut2_if1_mac} @@ -425,7 +109,7 @@ | | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS' | | ... | Set Variable | ${dut2_if2} | | ... | ELSE | Set Variable | ${subif_index_1} -| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2002:3::1 | ${tg1_if2_mac} +| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2002:3::1 | ${tg_if2_mac} | | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2002:1::2 | ${prefix} | | Run Keyword If | '${dut2_status}' == 'PASS' | | ... | VPP Interface Set IP Address | ${dut1} | ${subif_index_1} | 2002:2::1 @@ -434,7 +118,7 @@ | | ... | VPP Interface Set IP Address | ${dut2} | ${subif_index_2} | 2002:2::2 | | ... | ${prefix} | | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 2002:3::2 | ${prefix} -| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Vpp All Ra Suppress Link Layer | ${nodes} | | Vpp Route Add | ${dut1} | ${tg_if1_net} | ${host_prefix} | | ... | gateway=2002:1::1 | interface=${dut1_if1} | | Run Keyword If | '${dut2_status}' == 'PASS' @@ -454,10 +138,6 @@ | | ... | routing for IPv6 for required number of SIDs and configure IPv6 routes | | ... | on both DUT nodes. | | ... -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} | | VPP Interface Set IP Address | | ... | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix} | | VPP Interface Set IP Address @@ -466,13 +146,13 @@ | | ... | ${dut2} | ${dut2_if1} | ${dut2_if1_ip6} | ${prefix} | | VPP Interface Set IP Address | | ... | ${dut2} | ${dut2_if2} | ${dut2_if2_ip6} | ${prefix} -| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Vpp All Ra Suppress Link Layer | ${nodes} | | :FOR | ${number} | IN RANGE | 2 | ${dst_addr_nr}+2 | | | ${hexa_nr}= | Convert To Hex | ${number} | | | VPP Add IP Neighbor | ${dut1} -| | | ... | ${dut1_if1} | ${tg_if1_ip6_subnet}${hexa_nr} | ${tg1_if1_mac} +| | | ... | ${dut1_if1} | ${tg_if1_ip6_subnet}${hexa_nr} | ${tg_if1_mac} | | | VPP Add IP Neighbor | ${dut2} -| | | ... | ${dut2_if2} | ${tg_if2_ip6_subnet}${hexa_nr} | ${tg1_if2_mac} +| | | ... | ${dut2_if2} | ${tg_if2_ip6_subnet}${hexa_nr} | ${tg_if2_mac} | | VPP Add IP Neighbor | | ... | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} | | VPP Add IP Neighbor @@ -544,10 +224,6 @@ | | ... | KW uses test variable rxq_count_int set by KW Add worker threads | | ... | and rxqueues to all DUTs | | ... -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} | | ${sock1}= | Set Variable | memif-DUT1_CNF | | ${sock2}= | Set Variable | memif-DUT2_CNF | | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock1} @@ -560,7 +236,6 @@ | | ... | ${rxq_count_int} | | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if1} | | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if2} -| | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | Show Memif | ${nodes['${dut}']} | | VPP Interface Set IP Address @@ -579,15 +254,15 @@ | | ... | ${dut2-memif-1-if1_ip6} | ${mem_prefix} | | VPP Interface Set IP Address | ${dut2} | ${dut2-memif-1-if2} | | ... | ${dut2-memif-1-if2_ip6} | ${mem_prefix} -| | Suppress ICMPv6 router advertisement message | ${nodes} +| | Vpp All Ra Suppress Link Layer | ${nodes} | | VPP Add IP Neighbor | | ... | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac} | | VPP Add IP Neighbor | | ... | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac} | | VPP Add IP Neighbor -| | ... | ${dut1} | ${dut1_if1} | ${tg_if1_ip6_subnet}2 | ${tg1_if1_mac} +| | ... | ${dut1} | ${dut1_if1} | ${tg_if1_ip6_subnet}2 | ${tg_if1_mac} | | VPP Add IP Neighbor -| | ... | ${dut2} | ${dut2_if2} | ${tg_if2_ip6_subnet}2 | ${tg1_if2_mac} +| | ... | ${dut2} | ${dut2_if2} | ${tg_if2_ip6_subnet}2 | ${tg_if2_mac} | | ${dut1-memif-1-if2_mac}= | Get Interface MAC | ${dut1} | memif2 | | ${dut2-memif-1-if2_mac}= | Get Interface MAC | ${dut2} | memif2 | | VPP Add IP Neighbor | ${dut1} @@ -650,238 +325,6 @@ | | ... | ELSE | Fail | Unsupported behaviour: ${behavior} | | Set interfaces in path up -| Initialize L2 patch -| | [Documentation] -| | ... | Setup L2 patch topology by cross connecting two interfaces on -| | ... | each DUT. Interfaces are brought up. -| | ... -| | Set interfaces in path up -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | Configure L2patch | ${nodes['${dut}']} | ${${dut}_if1} | ${${dut}_if2} - -| Initialize L2 xconnect in 2-node circular topology -| | [Documentation] -| | ... | Setup L2 xconnect topology by cross connecting two interfaces on -| | ... | each DUT. Interfaces are brought up. -| | ... -| | Set interfaces in path up -| | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1_if2} - -| Initialize L2 xconnect in 3-node circular topology -| | [Documentation] -| | ... | Setup L2 xconnect topology by cross connecting two interfaces on -| | ... | each DUT. Interfaces are brought up. -| | ... | -| | Set interfaces in path up -| | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_if2} - -| Initialize L2 xconnect with VXLANoIPv4 in 3-node circular topology -| | [Documentation] -| | ... | Setup L2 xconnect topology with VXLANoIPv4 by cross connecting -| | ... | physical and vxlan interfaces on each DUT. All interfaces are brought -| | ... | up. IPv4 addresses with prefix /24 are configured on interfaces -| | ... | between DUTs. VXLAN sub-interfaces has same IPv4 address as -| | ... | interfaces. -| | ... -| | Set interfaces in path up -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 172.16.0.1 | 24 -| | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 172.16.0.2 | 24 -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 172.16.0.2 | ${dut2_if1_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if1} | 172.16.0.1 | ${dut1_if2_mac} -| | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24 -| | ... | 172.16.0.1 | 172.16.0.2 -| | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1s_vxlan} -| | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | 24 -| | ... | 172.16.0.2 | 172.16.0.1 -| | Configure L2XC | ${dut2} | ${dut2_if2} | ${dut2s_vxlan} - -| Initialize L2 xconnect with Vhost-User on node -| | [Documentation] -| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on -| | ... | defined VPP node. Add each Vhost-User interface into L2 cross-connect -| | ... | with with physical inteface or Vhost-User interface of another VM. -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node. Type: string -| | ... | - nf_nodes - VM count. Type: integer -| | ... -| | ... | *Note:* -| | ... | Socket paths for VM are defined in following format: -| | ... | - /tmp/sock-\${VM_ID}-1 -| | ... | - /tmp/sock-\${VM_ID}-2 -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 xconnect with Vhost-User on node \| DUT1 \| 1 \| -| | ... -| | [Arguments] | ${dut} | ${nf_nodes}=${1} -| | ... -| | :FOR | ${number} | IN RANGE | 1 | ${nf_nodes}+1 -| | | ${sock1}= | Set Variable | /var/run/vpp/sock-${number}-1 -| | | ${sock2}= | Set Variable | /var/run/vpp/sock-${number}-2 -| | | ${prev_index}= | Evaluate | ${number}-1 -| | | Configure vhost interfaces for L2BD forwarding | ${nodes['${dut}']} -| | | ... | ${sock1} | ${sock2} | ${dut}-vhost-${number}-if1 -| | | ... | ${dut}-vhost-${number}-if2 -| | | ${dut_xconnect_if1}= | Set Variable If | ${number}==1 | ${${dut}_if1} -| | | ... | ${${dut}-vhost-${prev_index}-if2} -| | | Configure L2XC | ${nodes['${dut}']} | ${dut_xconnect_if1} -| | | ... | ${${dut}-vhost-${number}-if1} -| | | Run Keyword If | ${number}==${nf_nodes} | Configure L2XC -| | | ... | ${nodes['${dut}']} | ${${dut}-vhost-${number}-if2} | ${${dut}_if2} - -| Initialize L2 xconnect with Vhost-User -| | [Documentation] -| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on -| | ... | all VPP nodes. Add each Vhost-User interface into L2 cross-connect -| | ... | with with physical inteface or Vhost-User interface of another VM. -| | ... -| | ... | *Arguments:* -| | ... | - nf_nodes - VM count. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 xconnect with Vhost-User \| 1 \| -| | ... -| | [Arguments] | ${nf_nodes}=${1} -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | Initialize L2 xconnect with Vhost-User on node | ${dut} -| | | ... | nf_nodes=${nf_nodes} - -| Initialize L2 xconnect with Vhost-User and VLAN in 3-node circular topology -| | [Documentation] -| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Cross -| | ... | connect each Vhost interface with one physical interface. -| | ... | Setup VLAN between DUTs. All interfaces are brought up. -| | ... -| | ... | *Arguments:* -| | ... | - subid - ID of the sub-interface to be created. Type: string -| | ... | - tag_rewrite - Method of tag rewrite. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| L2 xconnect with Vhost-User and VLAN initialized in a 3-node\ -| | ... | circular topology \| 10 \| pop-1 \| -| | ... -| | [Arguments] | ${subid} | ${tag_rewrite} -| | ... -| | Set interfaces in path up -| | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} -| | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} -| | ... | ${tag_rewrite} -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | /var/run/vpp/sock-1-1 | /var/run/vpp/sock-1-2 -| | Configure L2XC | ${dut1} | ${dut1_if1} | ${vhost_if1} -| | Configure L2XC | ${dut1} | ${subif_index_1} | ${vhost_if2} -| | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | /var/run/vpp/sock-1-1 | /var/run/vpp/sock-1-2 -| | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1} -| | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2} - -| Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology -| | [Documentation] -| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Create one -| | ... | link bonding (BondEthernet) interface on both VPP nodes. Enslave one -| | ... | physical interface towards next DUT by BondEthernet interface. Setup -| | ... | VLAN on BondEthernet interfaces between DUTs. Cross connect one Vhost -| | ... | interface with physical interface towards TG and other Vhost interface -| | ... | with VLAN sub-interface. All interfaces are brought up. -| | ... -| | ... | *Arguments:* -| | ... | - subid - ID of the sub-interface to be created. Type: string -| | ... | - tag_rewrite - Method of tag rewrite. Type: string -| | ... | - bond_mode - Link bonding mode. Type: string -| | ... | - lb_mode - Load balance mode. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 xconnect with Vhost-User and VLAN with VPP link\ -| | ... | bonding in 3-node circular topology \| 10 \| pop-1 \| xor \| l34 \| -| | ... -| | [Arguments] | ${subid} | ${tag_rewrite} | ${bond_mode} | ${lb_mode} -| | ... -| | Set interfaces in path up -| | ${dut1_eth_bond_if1}= | VPP Create Bond Interface | ${dut1} | ${bond_mode} -| | ... | ${lb_mode} -| | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up -| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} -| | ${if2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut1_if2} -| | Run Keyword If | '${if2_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} -| | ... | ${dut1_eth_bond_if1} -| | ... | ELSE -| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_1} -| | ... | ${dut1_eth_bond_if1} -| | Run Keyword Unless | '${if2_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_2} -| | ... | ${dut1_eth_bond_if1} -| | ${dut2_eth_bond_if1}= | VPP Create Bond Interface | ${dut2} | ${bond_mode} -| | ... | ${lb_mode} -| | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up -| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} -| | ${if1_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2_if1} -| | Run Keyword If | '${if1_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} -| | ... | ${dut2_eth_bond_if1} -| | ... | ELSE -| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_1} -| | ... | ${dut2_eth_bond_if1} -| | Run Keyword Unless | '${if2_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_2} -| | ... | ${dut2_eth_bond_if1} -| | VPP Show Bond Data On All Nodes | ${nodes} | verbose=${TRUE} -| | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} -| | ... | ${subid} -| | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} -| | ... | ${tag_rewrite} -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | /var/run/vpp/sock-1-1 | /var/run/vpp/sock-1-2 -| | Configure L2XC | ${dut1} | ${dut1_if1} | ${vhost_if1} -| | Configure L2XC | ${dut1} | ${subif_index_1} | ${vhost_if2} -| | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | /var/run/vpp/sock-1-1 | /var/run/vpp/sock-1-2 -| | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1} -| | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2} - -| Initialize L2 bridge domain in circular topology -| | [Documentation] -| | ... | Setup L2 DB topology by adding two interfaces on each DUT into BD -| | ... | that is created automatically with index 1. Learning is enabled. -| | ... | Interfaces are brought up. -| | ... -| | ... | *Arguments:* -| | ... | - bd_id - Bridge domain ID. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domain in circular topology \| 1 \| -| | ... -| | [Arguments] | ${bd_id}=${1} -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id} -| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${bd_id} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id} - | Configure IPv4 ACLs | | [Documentation] | | ... | Configure ACL with required number of not-hitting permit ACEs plus two @@ -977,34 +420,6 @@ | | ... | Set Acl List For Interface | ${dut} | ${dut_if2} | output | | ... | ${acl_list} -| Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology -| | [Documentation] -| | ... | Setup L2BD topology by adding two interfaces on DUT1 into bridge -| | ... | domain that is created automatically with index 1. Learning is -| | ... | enabled. Interfaces are brought up. Apply required ACL rules to DUT1 -| | ... | interfaces. -| | ... -| | ... | *Arguments:* -| | ... | _None_ -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node \ -| | ... | circular topology \| -| | ... -| | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - dut1 - DUT1 node. -| | ... | - dut2 - DUT2 node. -| | ... | - dut1_if1 - DUT1 interface towards TG. -| | ... | - dut1_if2 - DUT1 interface towards DUT2. -| | ... | - dut2_if1 - DUT2 interface towards DUT1. -| | ... | - dut2_if2 - DUT2 interface towards TG. -| | ... -| | Set interfaces in path up -| | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_if2} -| | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} - | Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node @@ -1047,18 +462,11 @@ | | ... | | Set interfaces in path up | | ... -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Get Interface MAC | ${dut2} | ${dut2_if1} -| | ... | | :FOR | ${number} | IN RANGE | 2 | ${ip_nr}+2 | | | VPP Add IP Neighbor -| | | ... | ${dut1} | ${dut1_if1} | 10.10.10.${number} | ${tg1_if1_mac} +| | | ... | ${dut1} | ${dut1_if1} | 10.10.10.${number} | ${tg_if1_mac} | | | VPP Add IP Neighbor -| | | ... | ${dut} | ${dut_if2} | 20.20.20.${number} | ${tg1_if2_mac} +| | | ... | ${dut} | ${dut_if2} | 20.20.20.${number} | ${tg_if2_mac} | | Run Keyword If | '${dut2_status}' == 'PASS' | | ... | VPP Add IP Neighbor | | ... | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac} @@ -1176,494 +584,6 @@ | | Run Keyword Unless | '${dut_if2}' == '${NONE}' | | ... | Add Del Macip Acl Interface | ${dut} | ${dut_if2} | add | ${acl_idx} -| Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node circular topology -| | [Documentation] -| | ... | Setup L2BD topology by adding two interfaces on DUT1 into bridge -| | ... | domain that is created automatically with index 1. Learning is -| | ... | enabled. Interfaces are brought up. Apply required MACIP ACL rules to -| | ... | DUT1 interfaces. -| | ... -| | ... | *Arguments:* -| | ... | _None_ -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domain with MACIP ACLs on DUT1 in 3-node \ -| | ... | circular topology \| -| | ... -| | ... | _NOTE 1:_ This KW uses following test case variables: -| | ... | - tg - TG node. -| | ... | - dut1 - DUT1 node. -| | ... | - dut2 - DUT2 node. -| | ... | - tg_if1 - TG interface towards DUT1. -| | ... | - tg_if2 - TG interface towards DUT2. -| | ... | - dut1_if1 - DUT1 interface towards TG. -| | ... | - dut1_if2 - DUT1 interface towards DUT2. -| | ... | - dut2_if1 - DUT2 interface towards DUT1. -| | ... | - dut2_if2 - DUT2 interface towards TG. -| | ... -| | Set interfaces in path up -| | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | Configure L2XC | ${dut2} | ${dut2_if1} | ${dut2_if2} -| | Configure MACIP ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2} - -| Initialize L2 bridge domains with Vhost-User on node -| | [Documentation] -| | ... | Create pairs of Vhost-User interfaces for defined number of VMs on -| | ... | defined VPP node. Add each Vhost-User interface into L2 bridge -| | ... | domains with learning enabled with physical inteface or Vhost-User -| | ... | interface of another VM. -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node. Type: string -| | ... | - nf_chain - NF chain. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer -| | ... -| | ... | *Note:* -| | ... | Socket paths for VM are defined in following format: -| | ... | - /var/run/vpp/sock-\${VM_ID}-1 -| | ... | - /var/run/vpp/sock-\${VM_ID}-2 -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domains with Vhost-User on node \| DUT1 \ -| | ... | \| 1 \| 1 \| -| | ... -| | [Arguments] | ${dut} | ${nf_chain}=${1} | ${nf_nodes}=${1} -| | ... -| | ${bd_id1}= | Evaluate | ${nf_nodes} * (${nf_chain} - 1) + ${nf_chain} -| | ${bd_id2}= | Evaluate | ${nf_nodes} * ${nf_chain} + ${nf_chain} -| | ${dut_str}= | Convert To Lowercase | ${dut} -| | Add interface to bridge domain -| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_1} -| | ... | ${bd_id1} -| | Add interface to bridge domain -| | ... | ${nodes['${dut}']} | ${${dut_str}_${prev_layer}_${nf_chain}_2} -| | ... | ${bd_id2} -| | :FOR | ${nf_node} | IN RANGE | 1 | ${nf_nodes} + 1 -| | | ${qemu_id}= | Evaluate | (${nf_chain} - ${1}) * ${nf_nodes} + ${nf_node} -| | | Configure vhost interfaces for L2BD forwarding -| | | ... | ${nodes['${dut}']} -| | | ... | /var/run/vpp/sock-${qemu_id}-1 | /var/run/vpp/sock-${qemu_id}-2 -| | | ... | ${dut}-vhost-${qemu_id}-if1 | ${dut}-vhost-${qemu_id}-if2 -| | | ${bd_id1}= | Evaluate | ${qemu_id} + (${nf_chain} - 1) -| | | ${bd_id2}= | Evaluate | ${bd_id1} + 1 -| | | Add interface to bridge domain -| | | ... | ${nodes['${dut}']} | ${${dut}-vhost-${qemu_id}-if1} | ${bd_id1} -| | | Add interface to bridge domain -| | | ... | ${nodes['${dut}']} | ${${dut}-vhost-${qemu_id}-if2} | ${bd_id2} - -| Initialize L2 bridge domains with Vhost-User -| | [Documentation] -| | ... | Create pairs of Vhost-User interfaces for defined number of VNF nodes -| | ... | on all defined VPP nodes. Add each Vhost-User interface into L2 bridge -| | ... | domains with learning enabled with physical inteface or Vhost-User -| | ... | interface of another VM. -| | ... -| | ... | *Arguments:* -| | ... | - nf_chain - NF chain. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domains with Vhost-User \| 1 \| 1 \| -| | ... -| | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1} -| | ... -| | :FOR | ${dut} | IN | @{duts} -| | | Initialize L2 bridge domains with Vhost-User on node -| | | ... | ${dut} | nf_chain=${nf_chain} | nf_nodes=${nf_nodes} - -| Initialize L2 bridge domains for multiple chains with Vhost-User -| | [Documentation] -| | ... | Create pairs of Vhost-User interfaces for defined number of NF chains -| | ... | with defined number of VNF nodes on all defined VPP nodes. Add each -| | ... | Vhost-User interface into L2 bridge domains with learning enabled -| | ... | with physical inteface or Vhost-User interface of another VM. -| | ... | Put all interfaces in path up. -| | ... -| | ... | *Arguments:* -| | ... | - nf_chains - Number of chains of NFs. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domains for multiple chains with Vhost-User \ -| | ... | \| 1 \| 1 \| -| | ... -| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} -| | ... -| | Set interfaces in path up -| | :FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains} + 1 -| | | Initialize L2 bridge domains with Vhost-User -| | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes} - -| Initialize L2 bridge domain with VXLANoIPv4 in 3-node circular topology -| | [Documentation] -| | ... | Setup L2 bridge domain topology with VXLANoIPv4 by connecting -| | ... | physical and vxlan interfaces on each DUT. All interfaces are brought -| | ... | up. IPv4 addresses with prefix /24 are configured on interfaces -| | ... | between DUTs. VXLAN sub-interfaces has same IPv4 address as -| | ... | interfaces. -| | ... -| | Set interfaces in path up -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 172.16.0.1 -| | ... | 24 -| | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 172.16.0.2 -| | ... | 24 -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 172.16.0.2 | ${dut2_if1_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if1} | 172.16.0.1 | ${dut1_if2_mac} -| | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24 -| | ... | 172.16.0.1 | 172.16.0.2 -| | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | 24 -| | ... | 172.16.0.2 | 172.16.0.1 -| | Configure L2BD forwarding | ${dut1} | ${dut1_if1} | ${dut1s_vxlan} -| | Configure L2BD forwarding | ${dut2} | ${dut2_if2} | ${dut2s_vxlan} - -| Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node circular topology -| | [Documentation] -| | ... | Setup L2 bridge domain topology with VLAN and VXLANoIPv4 by connecting -| | ... | pairs of VLAN sub-interface and VXLAN interface to separate L2 bridge -| | ... | domain on each DUT. All interfaces are brought up. IPv4 addresses -| | ... | with prefix /32 are configured on interfaces between DUTs. VXLAN -| | ... | sub-interfaces has same IPv4 address as interfaces. -| | ... -| | ... | *Arguments:* -| | ... | - vxlan_count - VXLAN count. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node \ -| | ... | \| circular topology \| ${1} \| -| | ... -| | [Arguments] | ${vxlan_count}=${1} -| | ... -| | Set interfaces in path up -| | ... -| | ${bd_id_start}= | Set Variable | ${1} -| | ${vni_start} = | Set Variable | ${20} -| | ... -| | ${ip_step} = | Set Variable | ${2} -| | ${dut1_ip_start}= | Set Variable | 172.16.0.1 -| | ${dut2_ip_start}= | Set Variable | 172.16.0.2 -| | ... -| | Vpp create multiple VXLAN IPv4 tunnels | node=${dut1} -| | ... | node_vxlan_if=${dut1_if2} | node_vlan_if=${dut1_if1} -| | ... | op_node=${dut2} | op_node_if=${dut2_if1} | n_tunnels=${vxlan_count} -| | ... | vni_start=${vni_start} | src_ip_start=${dut1_ip_start} -| | ... | dst_ip_start=${dut2_ip_start} | ip_step=${ip_step} -| | ... | bd_id_start=${bd_id_start} -| | Vpp create multiple VXLAN IPv4 tunnels | node=${dut2} -| | ... | node_vxlan_if=${dut2_if1} | node_vlan_if=${dut2_if2} -| | ... | op_node=${dut1} | op_node_if=${dut1_if2} | n_tunnels=${vxlan_count} -| | ... | vni_start=${vni_start} | src_ip_start=${dut2_ip_start} -| | ... | dst_ip_start=${dut1_ip_start} | ip_step=${ip_step} -| | ... | bd_id_start=${bd_id_start} - -| Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology -| | [Documentation] -| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each -| | ... | Vhost-User interface into L2 bridge domains with learning enabled -| | ... | with physical inteface. -| | ... | Setup VXLANoIPv4 between DUTs by connecting physical and vxlan -| | ... | interfaces on each DUT. All interfaces are brought up. -| | ... | IPv4 addresses with prefix /24 are configured on interfaces between -| | ... | DUTs. VXLAN sub-interfaces has same IPv4 address as interfaces. -| | ... -| | ... | *Arguments:* -| | ... | - bd_id1 - Bridge domain ID. Type: integer -| | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| L2 bridge domains with Vhost-User and VXLANoIPv4 initialized in a\ -| | ... | 3-node circular topology \| 1 \| 2 \| -| | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} -| | ... -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 172.16.0.1 -| | ... | 24 -| | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 172.16.0.2 -| | ... | 24 -| | Set interfaces in path up -| | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24 -| | ... | 172.16.0.1 | 172.16.0.2 -| | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | 24 -| | ... | 172.16.0.2 | 172.16.0.1 -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${dut1s_vxlan} | ${bd_id2} -| | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2s_vxlan} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} - -| Init L2 bridge domains with single DUT with Vhost-User and VXLANoIPv4 in 3-node circular topology -| | [Documentation] -| | ... | Create two Vhost-User interfaces on one VPP node. Add each -| | ... | Vhost-User interface into L2 bridge domains with learning enabled -| | ... | one connected to physical interface, the other to VXLAN. -| | ... | Setup VXLANoIPv4 between DUTs and TG by connecting physical and vxlan -| | ... | interfaces on the DUT. All interfaces are brought up. -| | ... | IPv4 addresses with prefix /24 are configured on interfaces between -| | ... | DUT and TG. -| | ... -| | ... | *Arguments:* -| | ... | - dut1_address - Address of physical interface on DUT1. Type: string -| | ... | - dut1_address_subnet - Subnet of the address of physical interface on -| | ... | DUT1. Type: string -| | ... | - dut2_address - Address of physical interface on DUT2. Type: string -| | ... | - dut2_address_subnet - Subnet of the address of physical interface on -| | ... | DUT2. Type: string -| | ... | - dut1_gw - Address of the _gateway_ to which the traffic will be -| | ... | forwarded on DUT1. Type: string -| | ... | - dut2_gw - Address of the _gateway_ to which the traffic will be -| | ... | forwarded on DUT2. Type: string -| | ... | - dut1_vxlans - List of VXLAN params to be configured on DUT1. -| | ... | Type: list of dicts, dict params vni, vtep -| | ... | - dut2_vxlans - List of VXLAN params to be configured on DUT2. -| | ... | Type: list of dicts, dict params vni, vtep -| | ... | - dut1_route_subnet - Subnet address to forward to _gateway_ on DUT1. -| | ... | Type: string -| | ... | - dut1_route_mask - Subnet address mask to forward to _gateway_ -| | ... | on DUT1. Type: string -| | ... | - dut2_route_subnet - Subnet address to forward to _gateway_ on DUT2. -| | ... | Type: string -| | ... | - dut2_route_mask - Subnet address mask to forward to _gateway_ -| | ... | on DUT2. Type: string -| | ... -| | ... | *Example:* -| | ... -| | [Arguments] | ${dut1_address} | ${dut1_address_subnet} | -| | ... | ${dut2_address} | ${dut2_address_subnet} | ${dut1_gw} | ${dut2_gw} | -| | ... | ${dut1_vxlans} | ${dut2_vxlans} | ${dut1_route_subnet} | -| | ... | ${dut1_route_mask} | ${dut2_route_subnet} | ${dut2_route_mask} -| | ... -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | /var/run/vpp/sock-1-${dut1_bd_id1} -| | ... | /var/run/vpp/sock-1-${dut1_bd_id2} -| | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | -| | ... | ${dut1_address} | ${dut1_address_subnet} -| | VPP Interface Set IP Address | ${dut2} | ${dut2_if2} | -| | ... | ${dut2_address} | ${dut2_address_subnet} -| | ${dut1_bd_id1}= | Set Variable | 1 -| | ${dut1_bd_id2}= | Set Variable | 2 -| | ${dut2_bd_id1}= | Set Variable | 1 -| | :FOR | ${vxlan} | IN | @{dut1_vxlans} -| | | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | ${vxlan.vni} -| | | ... | ${dut1_address} | ${vxlan.vtep} -| | | Add interface to bridge domain | ${dut1} | ${dut1s_vxlan} | ${dut1_bd_id1} -| | :FOR | ${vxlan} | IN | @{dut2_vxlans} -| | | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | ${vxlan.vni} -| | | ... | ${dut2_address} | ${vxlan.vtep} -| | | Add interface to bridge domain | ${dut2} | ${dut2s_vxlan} | ${dut2_bd_id1} -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | ${dut1_gw} | ${tg_if1_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | ${dut2_gw} | ${tg_if2_mac} -| | Vpp Route Add | ${dut1} | ${dut1_route_subnet} | ${dut1_route_mask} -| | ... | gateway=${dut1_gw} | interface=${dut1_if1} -| | Vpp Route Add | ${dut2} | ${dut2_route_subnet} | ${dut2_route_mask} -| | ... | gateway=${dut2_gw} | interface=${dut2_if2} -| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${dut1_bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2_if1} | ${dut2_bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${dut1_bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${dut1_bd_id2} - -| Initialize L2 bridge domains with VLAN dot1q sub-interfaces in circular topology -| | [Documentation] -| | ... | Setup L2 bridge domain topology with learning enabled with VLAN by -| | ... | connecting physical and vlan interfaces on each DUT. In case of 3-node -| | ... | topology create VLAN sub-interfaces between DUTs. In case of 2-node -| | ... | topology create VLAN sub-interface on dut1-if2 interface. All -| | ... | interfaces are brought up. -| | ... -| | ... | *Arguments:* -| | ... | - bd_id1 - Bridge domain ID. Type: integer -| | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... | - subid - ID of the sub-interface to be created. Type: string -| | ... | - tag_rewrite - Method of tag rewrite. Type: string -| | ... -| | ... | _NOTE:_ This KW uses following test case variables: -| | ... | - dut1 - DUT1 node. -| | ... | - dut2 - DUT2 node. -| | ... | - dut1_if2 - DUT1 interface towards DUT2. -| | ... | - dut2_if1 - DUT2 interface towards DUT1. -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domains with VLAN dot1q sub-interfaces -| | ... | in a 3-node circular topology \| 1 \| 2 \| 10 \| pop-1 \| -| | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} -| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} -| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} -| | ... | ELSE | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} -| | ... -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${subif_index_2} -| | ... | ${bd_id2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} -| | ... | ${bd_id2} - -| Initialize L2 bridge domains with Vhost-User and VLAN in circular topology -| | [Documentation] -| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each -| | ... | Vhost-User interface into L2 bridge domains with learning enabled -| | ... | with physical inteface. In case of 3-node topology create VLAN -| | ... | sub-interfaces between DUTs. In case of 2-node topology create VLAN -| | ... | sub-interface on dut1-if2 interface. All interfaces are brought up. -| | ... -| | ... | *Arguments:* -| | ... | - bd_id1 - Bridge domain ID. Type: integer -| | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... | - subid - ID of the sub-interface to be created. Type: string -| | ... | - tag_rewrite - Method of tag rewrite. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| L2 bridge domains with Vhost-User and VLAN initialized in circular\ -| | ... | topology \| 1 \| 2 \| 10 \| pop-1 \| -| | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} -| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} -| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} -| | ... | ELSE | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} -| | ... -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${subif_index_2} -| | ... | ${bd_id1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} - -| Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology -| | [Documentation] -| | ... | Create two Vhost-User interfaces on all defined VPP nodes. Create one -| | ... | link bonding (BondEthernet) interface on both VPP nodes. Enslave one -| | ... | physical interface towards next DUT by BondEthernet interface. Setup -| | ... | VLAN on BondEthernet interfaces between DUTs. Add one Vhost-User -| | ... | interface into L2 bridge domains with learning enabled with physical -| | ... | interface towards TG and other Vhost-User interface into L2 bridge -| | ... | domains with learning enabled with VLAN sub-interface. All interfaces -| | ... | are brought up. -| | ... -| | ... | *Arguments:* -| | ... | - bd_id1 - Bridge domain ID. Type: integer -| | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... | - subid - ID of the sub-interface to be created. Type: string -| | ... | - tag_rewrite - Method of tag rewrite. Type: string -| | ... | - bond_mode - Link bonding mode. Type: string -| | ... | - lb_mode - Load balance mode. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 bridge domains with Vhost-User and VLAN with VPP\ -| | ... | link bonding in a 3-node circular topology \| 1 \| 2 \ -| | ... | \| 10 \| pop-1 \| xor \| l34 \| -| | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} -| | ... | ${bond_mode} | ${lb_mode} -| | ... -| | Set interfaces in path up -| | ${dut1_eth_bond_if1}= | VPP Create Bond Interface | ${dut1} | ${bond_mode} -| | ... | ${lb_mode} -| | Set Interface State | ${dut1} | ${dut1_eth_bond_if1} | up -| | VPP Set interface MTU | ${dut1} | ${dut1_eth_bond_if1} -| | ${if2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut1_if2} -| | Run Keyword If | '${if2_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2} -| | ... | ${dut1_eth_bond_if1} -| | ... | ELSE -| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_1} -| | ... | ${dut1_eth_bond_if1} -| | Run Keyword Unless | '${if2_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut1} | ${dut1_if2_2} -| | ... | ${dut1_eth_bond_if1} -| | ${dut2_eth_bond_if1}= | VPP Create Bond Interface | ${dut2} | ${bond_mode} -| | ... | ${lb_mode} -| | Set Interface State | ${dut2} | ${dut2_eth_bond_if1} | up -| | VPP Set interface MTU | ${dut2} | ${dut2_eth_bond_if1} -| | ${if1_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2_if1} -| | Run Keyword If | '${if1_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1} -| | ... | ${dut2_eth_bond_if1} -| | ... | ELSE -| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_1} -| | ... | ${dut2_eth_bond_if1} -| | Run Keyword Unless | '${if2_status}' == 'PASS' -| | ... | VPP Enslave Physical Interface | ${dut2} | ${dut2_if1_2} -| | ... | ${dut2_eth_bond_if1} -| | VPP Show Bond Data On All Nodes | ${nodes} | verbose=${TRUE} -| | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_eth_bond_if1} | ${dut2} | ${dut2_eth_bond_if1} -| | ... | ${subid} -| | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} -| | ... | ${tag_rewrite} -| | Configure vhost interfaces for L2BD forwarding | ${dut1} -| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${vhost_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} -| | Configure vhost interfaces for L2BD forwarding | ${dut2} -| | ... | /var/run/vpp/sock-1-${bd_id1} | /var/run/vpp/sock-1-${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${subif_index_2} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${vhost_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} -| | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} - | Initialize LISP IPv4 forwarding in 3-node circular topology | | [Documentation] | Custom setup of IPv4 addresses on all DUT nodes and TG \ | | ... | Don`t set route. @@ -1687,16 +607,12 @@ | | ... | ${dut2_dut1_address} | ${dut2_tg_address} | ${duts_prefix} | | ... | | Set interfaces in path up -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg_if1_mac} | | VPP Add IP Neighbor | | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_address} | ${dut2_if1_mac} | | VPP Add IP Neighbor | | ... | ${dut2} | ${dut2_if1} | ${dut1_dut2_address} | ${dut1_if2_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} +| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg_if2_mac} | | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | | ... | ${dut1_tg_address} | ${duts_prefix} | | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} @@ -1763,10 +679,6 @@ | | ... | ${dut2_dut1_address} | ${dut2_tg_address} | ${prefix} | | ... | | Set interfaces in path up -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} | | VPP Interface Set IP Address | | ... | ${dut1} | ${dut1_if1} | ${dut1_tg_address} | ${prefix} | | VPP Interface Set IP Address @@ -1775,9 +687,9 @@ | | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_address} | ${prefix} | | VPP Interface Set IP Address | | ... | ${dut2} | ${dut2_if2} | ${dut2_tg_address} | ${prefix} -| | Suppress ICMPv6 router advertisement message | ${nodes} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac} +| | Vpp All Ra Suppress Link Layer | ${nodes} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg_if1_mac} +| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg_if2_mac} | | VPP Add IP Neighbor | | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_address} | ${dut2_if1_mac} | | VPP Add IP Neighbor @@ -1811,10 +723,6 @@ | | ... | ${prefix4} | ${prefix6} | | ... | | Set interfaces in path up -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} | | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | | ... | ${dut1_tg_ip4_address} | ${prefix4} | | VPP Interface Set IP Address @@ -1823,9 +731,9 @@ | | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_ip6_address} | ${prefix6} | | VPP Interface Set IP Address | ${dut2} | ${dut2_if2} | | ... | ${dut2_tg_ip4_address} | ${prefix4} -| | Suppress ICMPv6 router advertisement message | ${nodes} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac} +| | Vpp All Ra Suppress Link Layer | ${nodes} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg_if1_mac} +| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg_if2_mac} | | VPP Add IP Neighbor | | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_ip6_address} | ${dut2_if1_mac} | | VPP Add IP Neighbor @@ -1859,10 +767,6 @@ | | ... | ${prefix6} | ${prefix4} | | ... | | Set interfaces in path up -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1} | | VPP Interface Set IP Address | | ... | ${dut1} | ${dut1_if1} | ${dut1_tg_ip6_address} | ${prefix6} | | VPP Interface Set IP Address @@ -1871,9 +775,9 @@ | | ... | ${dut2} | ${dut2_if1} | ${dut2_dut1_ip4_address} | ${prefix4} | | VPP Interface Set IP Address | | ... | ${dut2} | ${dut2_if2} | ${dut2_tg_ip6_address} | ${prefix6} -| | Suppress ICMPv6 router advertisement message | ${nodes} -| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac} -| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac} +| | Vpp All Ra Suppress Link Layer | ${nodes} +| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg_if1_mac} +| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg_if2_mac} | | VPP Add IP Neighbor | | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_ip4_address} | ${dut2_if1_mac} | | VPP Add IP Neighbor @@ -1908,13 +812,6 @@ | | ... | ELSE | Set Variable | ${dut1_if2} | | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 12.0.0.1 | 20 | | ... -| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Get Interface MAC | ${dut1} | ${dut1_if2} -| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Get Interface MAC | ${dut2} | ${dut2_if1} -| | ... | | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.0.0.2 | ${tg_if1_mac} | | Run Keyword If | '${dut2_status}' == 'PASS' | | ... | VPP Add IP Neighbor @@ -1941,379 +838,6 @@ | | Configure deterministic mode for NAT44 | | ... | ${dut1} | 20.0.0.0 | 18 | 200.0.0.0 | 30 -| Initialize L2 xconnect with memif pairs on DUT node -| | [Documentation] -| | ... | Create pairs of Memif interfaces on DUT node. Cross connect each Memif -| | ... | interface with one physical interface or virtual interface to create -| | ... | a chain accross DUT node. -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node. Type: dictionary -| | ... | - count - Number of memif pairs (containers). Type: integer -| | ... -| | ... | *Note:* -| | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-\${dut}_CNF\${number}-\${sid} -| | ... -| | ... | KW uses test variable \${rxq_count_int} set by KW Add worker threads -| | ... | and rxqueues to all DUTs -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 xconnect with memif pairs on DUT node \| ${dut} \ -| | ... | \| ${1} \| -| | ... -| | [Arguments] | ${dut} | ${count} -| | ... -| | :FOR | ${number} | IN RANGE | 1 | ${count}+1 -| | | ${sock1}= | Set Variable | memif-${dut}_CNF -| | | ${sock2}= | Set Variable | memif-${dut}_CNF -| | | ${prev_index}= | Evaluate | ${number}-1 -| | | Set up memif interfaces on DUT node | ${nodes['${dut}']} -| | | ... | ${sock1} | ${sock2} | ${number} | ${dut}-memif-${number}-if1 -| | | ... | ${dut}-memif-${number}-if2 | ${rxq_count_int} | ${rxq_count_int} -| | | ${xconnect_if1}= | Set Variable If | ${number}==1 | ${${dut}_if1} -| | | ... | ${${dut}-memif-${prev_index}-if2} -| | | Configure L2XC | ${nodes['${dut}']} | ${xconnect_if1} -| | | ... | ${${dut}-memif-${number}-if1} -| | | Run Keyword If | ${number}==${count} | Configure L2XC -| | | ... | ${nodes['${dut}']} | ${${dut}-memif-${number}-if2} | ${${dut}_if2} - -| Initialize L2 xconnect with memif pairs -| | [Documentation] -| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Cross -| | ... | connect each Memif interface with one physical interface or virtual -| | ... | interface to create a chain accross DUT node. -| | ... -| | ... | *Arguments:* -| | ... | - count - Number of memif pairs (containers). Type: integer -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 xconnect with memif pairs \| ${1} \| -| | ... -| | [Arguments] | ${count}=${1} -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | Initialize L2 xconnect with memif pairs on DUT node | ${dut} | ${count} -| | Set interfaces in path up -| | Show Memif on all DUTs | ${nodes} -| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif - -| Initialize L2 Bridge Domain with memif pairs on DUT node -| | [Documentation] -| | ... | Create pairs of Memif interfaces on DUT node. Put each Memif interface -| | ... | to separate L2 bridge domain with one physical or memif interface -| | ... | to create a chain accross DUT node. -| | ... -| | ... | *Arguments:* -| | ... | - dut - DUT node. Type: dictionary -| | ... | - nf_chain - NF chain. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer -| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface -| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean -| | ... -| | ... | *Note:* -| | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-\${dut}_CNF\${nf_id}-\${sid} -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 Bridge Domain with memif pairs on DUT node \ -| | ... | \| ${dut} \| 1 \| 1 \| -| | ... -| | [Arguments] | ${dut} | ${nf_chain}=${1} | ${nf_nodes}=${1} -| | ... | ${auto_scale}=${True} -| | ... -| | ${rxq}= | Run Keyword If | ${auto_scale} == ${True} -| | ... | Set Variable | ${rxq_count_int} -| | ... | ELSE | Set Variable | ${1} -| | ${bd_id2}= | Evaluate | ${nf_nodes}+1 -| | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} | ${1} -| | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if2} -| | ... | ${bd_id2} -| | :FOR | ${nf_node} | IN RANGE | 1 | ${nf_nodes}+1 -| | | ${nf_id}= | Evaluate | (${nf_chain} - ${1}) * ${nf_nodes} + ${nf_node} -| | | ${sock1}= | Set Variable | memif-${dut}_CNF -| | | ${sock2}= | Set Variable | memif-${dut}_CNF -| | | Set up memif interfaces on DUT node | ${nodes['${dut}']} -| | | ... | ${sock1} | ${sock2} | ${nf_id} | ${dut}-memif-${nf_id}-if1 -| | | ... | ${dut}-memif-${nf_id}-if2 | ${rxq} | ${rxq} -| | | ${bd_id2}= | Evaluate | ${nf_node}+1 -| | | Add interface to bridge domain | ${nodes['${dut}']} -| | | ... | ${${dut}-memif-${nf_id}-if1} | ${nf_node} -| | | Add interface to bridge domain | ${nodes['${dut}']} -| | | ... | ${${dut}-memif-${nf_id}-if2} | ${bd_id2} - -| Initialize L2 Bridge Domain with memif pairs -| | [Documentation] -| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each -| | ... | Memif interface to separate L2 bridge domain with one physical or -| | ... | virtual interface to create a chain accross DUT node. -| | ... -| | ... | *Arguments:* -| | ... | - nf_chain - NF chain. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer -| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface -| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 Bridge Domain with memif pairs \| 1 \| 1 \| -| | ... -| | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | Initialize L2 Bridge Domain with memif pairs on DUT node | ${dut} -| | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes} -| | | ... | auto_scale=${auto_scale} - -| Initialize L2 Bridge Domain for multiple chains with memif pairs -| | [Documentation] -| | ... | Create pairs of Memif interfaces for defined number of NF chains -| | ... | with defined number of NF nodes on all defined VPP nodes. Add each -| | ... | Memif interface into L2 bridge domains with learning enabled -| | ... | with physical inteface or Memif interface of another NF. -| | ... -| | ... | *Arguments:* -| | ... | - nf_chains - Number of chains of NFs. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per chain. Type: integer -| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface -| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 Bridge Domain for multiple chains with memif pairs \ -| | ... | \| 1 \| 1 \| -| | ... -| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} -| | ... -| | :FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains}+1 -| | | Initialize L2 Bridge Domain with memif pairs | nf_chain=${nf_chain} -| | | ... | nf_nodes=${nf_nodes} | auto_scale=${auto_scale} -| | Set interfaces in path up -| | Show Memif on all DUTs | ${nodes} -| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif - -| Initialize L2 Bridge Domain for pipeline with memif pairs -| | [Documentation] -| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each -| | ... | Memif interface to separate L2 bridge domain with one physical or -| | ... | virtual interface to create a service pipeline on DUT node. -| | ... -| | ... | *Arguments:* -| | ... | - nf_chain - NF pipe. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per pipeline. Type: integer -| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface -| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 Bridge Domain for pipeline with memif pairs \ -| | ... | \| 1 \| 1 \| -| | ... -| | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} -| | ... -| | ${rxq}= | Run Keyword If | ${auto_scale} == ${True} -| | ... | Set Variable | ${rxq_count_int} -| | ... | ELSE | Set Variable | ${1} -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} | ${1} -| | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if2} | ${2} -| | | ${nf_id_frst}= | Evaluate | (${nf_chain}-${1}) * ${nf_nodes} + ${1} -| | | ${nf_id_last}= | Evaluate | (${nf_chain}-${1}) * ${nf_nodes} + ${nf_nodes} -| | | ${sid_frst}= | Evaluate | ${nf_id_frst} * ${2} - ${1} -| | | ${sid_last}= | Evaluate | ${nf_id_last} * ${2} -| | | Set up single memif interface on DUT node | ${nodes['${dut}']} -| | | ... | memif-${dut}_CNF | mid=${nf_id_frst} | sid=${sid_frst} -| | | ... | memif_if=${dut}-memif-${nf_id_frst}-if1 -| | | ... | rxq=${rxq} | txq=${rxq} -| | | Set up single memif interface on DUT node | ${nodes['${dut}']} -| | | ... | memif-${dut}_CNF | mid=${nf_id_last} | sid=${sid_last} -| | | ... | memif_if=${dut}-memif-${nf_id_last}-if2 -| | | ... | rxq=${rxq} | txq=${rxq} -| | | Add interface to bridge domain | ${nodes['${dut}']} -| | | ... | ${${dut}-memif-${nf_id_frst}-if1} | ${1} -| | | Add interface to bridge domain | ${nodes['${dut}']} -| | | ... | ${${dut}-memif-${nf_id_last}-if2} | ${2} - -| Initialize L2 Bridge Domain for multiple pipelines with memif pairs -| | [Documentation] -| | ... | Create pairs of Memif interfaces for defined number of NF pipelines -| | ... | with defined number of NF nodes on all defined VPP nodes. Add each -| | ... | Memif interface into L2 bridge domains with learning enabled -| | ... | with physical inteface or Memif interface of another NF. -| | ... -| | ... | *Arguments:* -| | ... | - nf_chains - Number of pipelines of NFs. Type: integer -| | ... | - nf_nodes - Number of NFs nodes per pipeline. Type: integer -| | ... | - auto_scale - Whether to use same amount of RXQs for memif interface -| | ... | in containers as vswitch, otherwise use single RXQ. Type: boolean -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 Bridge Domain for multiple pipelines with memif \ -| | ... | pairs \| 1 \| 1 \| -| | ... -| | [Arguments] | ${nf_chains}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True} -| | ... -| | :FOR | ${nf_chain} | IN RANGE | 1 | ${nf_chains}+1 -| | | Initialize L2 Bridge Domain for pipeline with memif pairs -| | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes} -| | | ... | auto_scale=${auto_scale} -| | Set interfaces in path up -| | Show Memif on all DUTs | ${nodes} -| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif - -| Initialize L2 Bridge Domain with memif pairs and VLAN in circular topology -| | [Documentation] -| | ... | Create pairs of Memif interfaces on all defined VPP nodes. Put each -| | ... | Memif interface to separate L2 bridge domain with one physical or -| | ... | virtual interface to create a chain accross DUT node. In case of -| | ... | 3-node topology create VLAN sub-interfaces between DUTs. In case of -| | ... | 2-node topology create VLAN sub-interface on dut1-if2 interface. All -| | ... | interfaces are brought up. -| | ... -| | ... | *Arguments:* -| | ... | - bd_id1 - Bridge domain ID. Type: integer -| | ... | - bd_id2 - Bridge domain ID. Type: integer -| | ... | - subid - ID of the sub-interface to be created. Type: string -| | ... | - tag_rewrite - Method of tag rewrite. Type: string -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 Bridge Domain with memif pairs and VLAN in circular\ -| | ... | topology \| 1 \| 2 \| 10 \| pop-1 \| -| | ... -| | [Arguments] | ${bd_id1} | ${bd_id2} | ${subid} | ${tag_rewrite} -| | ... -| | ${dut2_status} | ${value}= | Run Keyword And Ignore Error -| | ... | Variable Should Exist | ${dut2} -| | ... -| | Set interfaces in path up -| | ... -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} -| | ... | ELSE | Initialize VLAN dot1q sub-interfaces in circular topology -| | ... | ${dut1} | ${dut1_if2} | SUB_ID=${subid} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Configure L2 tag rewrite method on interfaces | ${dut1} -| | ... | ${subif_index_1} | ${dut2} | ${subif_index_2} | ${tag_rewrite} -| | ... | ELSE | Configure L2 tag rewrite method on interfaces -| | ... | ${dut1} | ${subif_index_1} | TAG_REWRITE_METHOD=${tag_rewrite} -| | ... -| | ${number}= | Set Variable | ${1} -| | ${sock1}= | Set Variable | memif-DUT1_CNF -| | ${sock2}= | Set Variable | memif-DUT1_CNF -| | ${memif_if1_name}= | Set Variable | DUT1-memif-${number}-if1 -| | ${memif_if2_name}= | Set Variable | DUT1-memif-${number}-if2 -| | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock2} -| | ... | ${number} | ${memif_if1_name} | ${memif_if2_name} | ${rxq_count_int} -| | ... | ${rxq_count_int} -| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${${memif_if1_name}} | ${bd_id1} -| | Add interface to bridge domain | ${dut1} | ${${memif_if2_name}} | ${bd_id2} -| | Add interface to bridge domain | ${dut1} | ${subif_index_1} | ${bd_id2} -| | ${sock1}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | memif-DUT2_CNF -| | ${sock2}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | memif-DUT2_CNF -| | ${memif_if1_name}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | DUT2-memif-${number}-if1 -| | ${memif_if2_name}= | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set Variable | DUT2-memif-${number}-if2 -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Set up memif interfaces on DUT node | ${dut2} | ${sock1} | ${sock2} -| | ... | ${number} | ${memif_if1_name} | ${memif_if2_name} | ${rxq_count_int} -| | ... | ${rxq_count_int} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${subif_index_2} -| | ... | ${bd_id1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${${memif_if1_name}} -| | ... | ${bd_id1} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${${memif_if2_name}} -| | ... | ${bd_id2} -| | Run Keyword If | '${dut2_status}' == 'PASS' -| | ... | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} -| | ... -| | Show Memif on all DUTs | ${nodes} -| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif - -| Initialize L2 xconnect for single memif -| | [Documentation] -| | ... | Create single Memif interface on all defined VPP nodes. Cross -| | ... | connect Memif interface with one physical interface. -| | ... -| | ... | *Arguments:* -| | ... | - number - Memif ID. Type: integer -| | ... -| | ... | *Note:* -| | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-DUT1_CNF\${number}-\${sid} -| | ... -| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads -| | ... | and rxqueues to all DUTs -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 xconnect for single memif \| 1 \| -| | ... -| | [Arguments] | ${number}=${1} -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | ${sock}= | Set Variable | memif-${dut}_CNF -| | | ${sid}= | Evaluate | (${number} * ${2}) - ${1} -| | | Set up single memif interface on DUT node | ${nodes['${dut}']} | ${sock} -| | | ... | mid=${number} | sid=${sid} | memif_if=${dut}-memif-${number}-if1 -| | | ... | rxq=${rxq_count_int} | txq=${rxq_count_int} -| | | Configure L2XC | ${nodes['${dut}']} | ${${dut}_if1} -| | | ... | ${${dut}-memif-${number}-if1} -| | Set single interfaces in path up -| | Show Memif on all DUTs | ${nodes} -| | VPP round robin RX placement on all DUTs | ${nodes} | prefix=memif - -| Initialize L2 Bridge Domain for single memif -| | [Documentation] -| | ... | Create single Memif interface on all defined VPP nodes. Put Memif -| | ... | interface to separate L2 bridge domain with one physical interface. -| | ... -| | ... | *Arguments:* -| | ... | - number - Memif ID. Type: integer -| | ... -| | ... | *Note:* -| | ... | Socket paths for Memif are defined in following format: -| | ... | - /tmp/memif-DUT1_CNF\${number}-\${sid} -| | ... -| | ... | KW uses test variable ${rxq_count_int} set by KW Add worker threads -| | ... | and rxqueues to all DUTs -| | ... -| | ... | *Example:* -| | ... -| | ... | \| Initialize L2 Bridge Domain for single memif \| 1 \| -| | ... -| | [Arguments] | ${number}=${1} -| | ... -| | ${duts}= | Get Matches | ${nodes} | DUT* -| | :FOR | ${dut} | IN | @{duts} -| | | ${sock}= | Set Variable | memif-${dut}_CNF -| | | ${sid}= | Evaluate | (${number} * ${2}) - ${1} -| | | Set up single memif interface on DUT node | ${nodes['${dut}']} | ${sock} -| | | ... | mid=${number} | sid=${sid} | memif_if=${dut}-memif-${number}-if1 -| | | ... | rxq=${rxq_count_int} | txq=${rxq_count_int} -| | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} -| | | ... | ${number} -| | | Add interface to bridge domain | ${nodes['${dut}']} -| | | ... | ${${dut}-memif-${number}-if1} | ${number} -| | Set single interfaces in path up -| | Show Memif on all DUTs | ${nodes} - | Configure ACLs on a single interface | | [Documentation] | | ... | Configure ACL