X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=src%2Fvnet%2Fipsec%2Fipsec.api;h=2e69e6250342dbd931839883f43593ea467e8831;hb=f441b5d0e;hp=72677d6e0ea634c9317bb6a8a1e87779bf8c52e7;hpb=12989b538881f9681f078cf1485c51df1251877a;p=vpp.git diff --git a/src/vnet/ipsec/ipsec.api b/src/vnet/ipsec/ipsec.api index 72677d6e0ea..2e69e625034 100644 --- a/src/vnet/ipsec/ipsec.api +++ b/src/vnet/ipsec/ipsec.api @@ -14,10 +14,13 @@ * limitations under the License. */ -option version = "3.0.0"; +option version = "5.0.2"; +import "vnet/ipsec/ipsec_types.api"; +import "vnet/interface_types.api"; import "vnet/ip/ip_types.api"; import "vnet/interface_types.api"; +import "vnet/tunnel/tunnel_types.api"; /** \brief IPsec: Add/delete Security Policy Database @param client_index - opaque cookie to identify the sender @@ -30,7 +33,7 @@ autoreply define ipsec_spd_add_del { u32 client_index; u32 context; - u8 is_add; + bool is_add; u32 spd_id; }; @@ -49,78 +52,40 @@ autoreply define ipsec_interface_add_del_spd u32 client_index; u32 context; - u8 is_add; - u32 sw_if_index; + bool is_add; + vl_api_interface_index_t sw_if_index; u32 spd_id; }; +/** \brief IPsec: Add/delete Security Policy Database entry -enum ipsec_spd_action -{ - /* bypass - no IPsec processing */ - IPSEC_API_SPD_ACTION_BYPASS = 0, - /* discard - discard packet with ICMP processing */ - IPSEC_API_SPD_ACTION_DISCARD, - /* resolve - send request to control plane for SA resolving */ - IPSEC_API_SPD_ACTION_RESOLVE, - /* protect - apply IPsec policy using following parameters */ - IPSEC_API_SPD_ACTION_PROTECT, -}; - -/** \brief IPsec: Security Policy Database entry - - See RFC 4301, 4.4.1.1 on how to match packet to selectors - - @param spd_id - SPD instance id (control plane allocated) - @param priority - priority of SPD entry (non-unique value). Used to order SPD matching - higher priorities match before lower - @param is_outbound - entry applies to outbound traffic if non-zero, otherwise applies to inbound traffic - @param remote_address_start - start of remote address range to match - @param remote_address_stop - end of remote address range to match - @param local_address_start - start of local address range to match - @param local_address_stop - end of local address range to match - @param protocol - protocol type to match [0 means any] otherwise IANA value - @param remote_port_start - start of remote port range to match ... - @param remote_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE] - @param local_port_start - start of local port range to match ... - @param local_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE] - @param policy - action to perform on match - @param sa_id - SAD instance id (control plane allocated) + @param client_index - opaque cookie to identify the sender + @param context - sender context, to match reply w/ request + @param is_add - add SPD if non-zero, else delete + @param entry - Description of the entry to add/dell */ -typedef ipsec_spd_entry +define ipsec_spd_entry_add_del { - u32 spd_id; - i32 priority; - u8 is_outbound; - - u32 sa_id; - vl_api_ipsec_spd_action_t policy; - u8 protocol; - - // Selector - vl_api_address_t remote_address_start; - vl_api_address_t remote_address_stop; - vl_api_address_t local_address_start; - vl_api_address_t local_address_stop; - - u16 remote_port_start; - u16 remote_port_stop; - u16 local_port_start; - u16 local_port_stop; + option deprecated; + u32 client_index; + u32 context; + bool is_add; + vl_api_ipsec_spd_entry_t entry; }; -/** \brief IPsec: Add/delete Security Policy Database entry +/** \brief IPsec: Add/delete Security Policy Database entry v2 @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param is_add - add SPD if non-zero, else delete @param entry - Description of the entry to add/dell */ -define ipsec_spd_entry_add_del +define ipsec_spd_entry_add_del_v2 { u32 client_index; u32 context; - u8 is_add; - vl_api_ipsec_spd_entry_t entry; + bool is_add; + vl_api_ipsec_spd_entry_v2_t entry; }; /** \brief IPsec: Reply Add/delete Security Policy Database entry @@ -130,6 +95,20 @@ define ipsec_spd_entry_add_del @param stat_index - An index for the policy in the stats segment @ /net/ipec/policy */ define ipsec_spd_entry_add_del_reply +{ + option deprecated; + u32 context; + i32 retval; + u32 stat_index; +}; + +/** \brief IPsec: Reply Add/delete Security Policy Database entry v2 + + @param context - sender context, to match reply w/ request + @param retval - success/fail rutrun code + @param stat_index - An index for the policy in the stats segment @ /net/ipec/policy +*/ +define ipsec_spd_entry_add_del_v2_reply { u32 context; i32 retval; @@ -154,7 +133,7 @@ define ipsec_spds_details { u32 context; u32 spd_id; u32 npolicies; -}; +}; /** \brief Dump ipsec policy database data @param client_index - opaque cookie to identify the sender @@ -180,126 +159,92 @@ define ipsec_spd_details { vl_api_ipsec_spd_entry_t entry; }; -/* - * @brief Support cryptographic algorithms +/** \brief IPsec: Add/delete Security Association Database entry + @param client_index - opaque cookie to identify the sender + @param context - sender context, to match reply w/ request + @param entry - Entry to add or delete */ -enum ipsec_crypto_alg +define ipsec_sad_entry_add_del { - IPSEC_API_CRYPTO_ALG_NONE = 0, - IPSEC_API_CRYPTO_ALG_AES_CBC_128, - IPSEC_API_CRYPTO_ALG_AES_CBC_192, - IPSEC_API_CRYPTO_ALG_AES_CBC_256, - IPSEC_API_CRYPTO_ALG_AES_CTR_128, - IPSEC_API_CRYPTO_ALG_AES_CTR_192, - IPSEC_API_CRYPTO_ALG_AES_CTR_256, - IPSEC_API_CRYPTO_ALG_AES_GCM_128, - IPSEC_API_CRYPTO_ALG_AES_GCM_192, - IPSEC_API_CRYPTO_ALG_AES_GCM_256, - IPSEC_API_CRYPTO_ALG_DES_CBC, - IPSEC_API_CRYPTO_ALG_3DES_CBC, + option deprecated; + u32 client_index; + u32 context; + bool is_add; + vl_api_ipsec_sad_entry_t entry; }; -/* - * @brief Supported Integrity Algorithms - */ -enum ipsec_integ_alg +define ipsec_sad_entry_add_del_v2 { - IPSEC_API_INTEG_ALG_NONE = 0, - /* RFC2403 */ - IPSEC_API_INTEG_ALG_MD5_96, - /* RFC2404 */ - IPSEC_API_INTEG_ALG_SHA1_96, - /* draft-ietf-ipsec-ciph-sha-256-00 */ - IPSEC_API_INTEG_ALG_SHA_256_96, - /* RFC4868 */ - IPSEC_API_INTEG_ALG_SHA_256_128, - /* RFC4868 */ - IPSEC_API_INTEG_ALG_SHA_384_192, - /* RFC4868 */ - IPSEC_API_INTEG_ALG_SHA_512_256, -}; - -enum ipsec_sad_flags + u32 client_index; + u32 context; + bool is_add; + vl_api_ipsec_sad_entry_v2_t entry; +}; + +define ipsec_sad_entry_add_del_v3 { - IPSEC_API_SAD_FLAG_NONE = 0, - /* Enable extended sequence numbers */ - IPSEC_API_SAD_FLAG_USE_ESN = 0x01, - /* Enable Anti-replay */ - IPSEC_API_SAD_FLAG_USE_ANTI_REPLAY = 0x02, - /* IPsec tunnel mode if non-zero, else transport mode */ - IPSEC_API_SAD_FLAG_IS_TUNNEL = 0x04, - /* IPsec tunnel mode is IPv6 if non-zero, - * else IPv4 tunnel only valid if is_tunnel is non-zero */ - IPSEC_API_SAD_FLAG_IS_TUNNEL_V6 = 0x08, - /* enable UDP encapsulation for NAT traversal */ - IPSEC_API_SAD_FLAG_UDP_ENCAP = 0x10, -}; - -enum ipsec_proto + u32 client_index; + u32 context; + bool is_add; + vl_api_ipsec_sad_entry_v3_t entry; +}; +define ipsec_sad_entry_add { - IPSEC_API_PROTO_ESP, - IPSEC_API_PROTO_AH, + u32 client_index; + u32 context; + vl_api_ipsec_sad_entry_v3_t entry; }; - -typedef key +autoreply define ipsec_sad_entry_del { - /* the length of the key */ - u8 length; - /* The data for the key */ - u8 data[128]; + u32 client_index; + u32 context; + u32 id; }; -/** \brief IPsec: Security Association Database entry +/** \brief An API to update the tunnel parameters and the ports associated with an SA + + Used in the NAT-T case when the NAT data changes @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request - @param is_add - add SAD entry if non-zero, else delete - @param sad_id - sad id - @param spi - security parameter index - @param protocol - 0 = AH, 1 = ESP - @param crypto_algorithm - a supported crypto algorithm - @param crypto_key - crypto keying material - @param integrity_algorithm - one of the supported algorithms - @param integrity_key - integrity keying material - @param tunnel_src_address - IPsec tunnel source address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero - @param tunnel_dst_address - IPsec tunnel destination address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero - @param tx_table_id - the FIB id used for encapsulated packets - @param salt - for use with counter mode ciphers + @param sa_id - the id of the SA to update + @param is_tun - update the tunnel if non-zero, else update only the ports + @param tunnel - sender context, to match reply w/ request + @param udp_src_port - new src port for NAT-T. Used if different from 0xffff + @param udp_dst_port - new dst port for NAT-T. Used if different from 0xffff */ -typedef ipsec_sad_entry +autoreply define ipsec_sad_entry_update { + u32 client_index; + u32 context; u32 sad_id; + bool is_tun; + vl_api_tunnel_t tunnel; + u16 udp_src_port [default=0xffff]; + u16 udp_dst_port [default=0xffff]; +}; - u32 spi; - - vl_api_ipsec_proto_t protocol; - - vl_api_ipsec_crypto_alg_t crypto_algorithm; - vl_api_key_t crypto_key; - - vl_api_ipsec_integ_alg_t integrity_algorithm; - vl_api_key_t integrity_key; - - vl_api_ipsec_sad_flags_t flags; +define ipsec_sad_entry_add_del_reply +{ + option deprecated; + u32 context; + i32 retval; + u32 stat_index; +}; - vl_api_address_t tunnel_src; - vl_api_address_t tunnel_dst; - u32 tx_table_id; - u32 salt; +define ipsec_sad_entry_add_del_v2_reply +{ + u32 context; + i32 retval; + u32 stat_index; }; -/** \brief IPsec: Add/delete Security Association Database entry - @param client_index - opaque cookie to identify the sender - @param context - sender context, to match reply w/ request - @param entry - Entry to add or delete - */ -define ipsec_sad_entry_add_del +define ipsec_sad_entry_add_del_v3_reply { - u32 client_index; u32 context; - u8 is_add; - vl_api_ipsec_sad_entry_t entry; + i32 retval; + u32 stat_index; }; -define ipsec_sad_entry_add_del_reply +define ipsec_sad_entry_add_reply { u32 context; i32 retval; @@ -341,12 +286,16 @@ define ipsec_sad_entry_add_del_reply @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @param sw_id_index - Tunnel interface to protect + @param nh - The peer/next-hop on the tunnel to which the traffic + should be protected. For a P2P interface set this to the + all 0s address. @param sa_in - The ID [set] of inbound SAs @param sa_out - The ID of outbound SA */ typedef ipsec_tunnel_protect { vl_api_interface_index_t sw_if_index; + vl_api_address_t nh; u32 sa_out; u8 n_sa_in; u32 sa_in[n_sa_in]; @@ -366,6 +315,7 @@ autoreply define ipsec_tunnel_protect_del u32 context; vl_api_interface_index_t sw_if_index; + vl_api_address_t nh; }; /** @@ -406,76 +356,54 @@ define ipsec_spd_interface_dump { define ipsec_spd_interface_details { u32 context; u32 spd_index; - u32 sw_if_index; + vl_api_interface_index_t sw_if_index; }; -/** \brief Add or delete IPsec tunnel interface - - !!DEPRECATED!! - use the tunnel protect APIs instead +typedef ipsec_itf +{ + u32 user_instance [default=0xffffffff]; + vl_api_tunnel_mode_t mode; + vl_api_interface_index_t sw_if_index; +}; - @param client_index - opaque cookie to identify the sender - @param context - sender context, to match reply w/ request - @param is_add - add IPsec tunnel interface if nonzero, else delete - @param is_ip6 - tunnel v6 or v4 - @param esn - enable extended sequence numbers if nonzero, else disable - @param anti_replay - enable anti replay check if nonzero, else disable - @param local_ip - local IP address - @param remote_ip - IP address of remote IPsec peer - @param local_spi - SPI of outbound IPsec SA - @param remote_spi - SPI of inbound IPsec SA - @param crypto_alg - encryption algorithm ID - @param local_crypto_key_len - length of local crypto key in bytes - @param local_crypto_key - crypto key for outbound IPsec SA - @param remote_crypto_key_len - length of remote crypto key in bytes - @param remote_crypto_key - crypto key for inbound IPsec SA - @param integ_alg - integrity algorithm ID - @param local_integ_key_len - length of local integrity key in bytes - @param local_integ_key - integrity key for outbound IPsec SA - @param remote_integ_key_len - length of remote integrity key in bytes - @param remote_integ_key - integrity key for inbound IPsec SA - @param renumber - intf display name uses a specified instance if != 0 - @param show_instance - instance to display for intf if renumber is set - @param udp_encap - enable UDP encapsulation for NAT traversal - @param tx_table_id - the FIB id used after packet encap - @param salt - for use with counter mode ciphers -*/ -define ipsec_tunnel_if_add_del { +/** \brief Create an IPSec interface + */ +define ipsec_itf_create { u32 client_index; u32 context; - u8 is_add; - u8 esn; - u8 anti_replay; - vl_api_address_t local_ip; - vl_api_address_t remote_ip; - u32 local_spi; - u32 remote_spi; - u8 crypto_alg; - u8 local_crypto_key_len; - u8 local_crypto_key[128]; - u8 remote_crypto_key_len; - u8 remote_crypto_key[128]; - u8 integ_alg; - u8 local_integ_key_len; - u8 local_integ_key[128]; - u8 remote_integ_key_len; - u8 remote_integ_key[128]; - u8 renumber; - u32 show_instance; - u8 udp_encap; - u32 tx_table_id; - u32 salt; + vl_api_ipsec_itf_t itf; }; -/** \brief Add/delete IPsec tunnel interface response +/** \brief Add IPsec interface interface response @param context - sender context, to match reply w/ request @param retval - return status @param sw_if_index - sw_if_index of new interface (for successful add) */ -define ipsec_tunnel_if_add_del_reply { +define ipsec_itf_create_reply +{ u32 context; i32 retval; - u32 sw_if_index; + vl_api_interface_index_t sw_if_index; +}; + +autoreply define ipsec_itf_delete +{ + u32 client_index; + u32 context; + vl_api_interface_index_t sw_if_index; +}; + +define ipsec_itf_dump +{ + u32 client_index; + u32 context; + vl_api_interface_index_t sw_if_index; +}; + +define ipsec_itf_details +{ + u32 context; + vl_api_ipsec_itf_t itf; }; /** \brief Dump IPsec security association @@ -483,7 +411,21 @@ define ipsec_tunnel_if_add_del_reply { @param context - sender context, to match reply w/ request @param sa_id - optional ID of an SA to dump, if ~0 dump all SAs in SAD */ -define ipsec_sa_dump { +define ipsec_sa_dump +{ + option deprecated; + u32 client_index; + u32 context; + u32 sa_id; +}; +define ipsec_sa_v2_dump +{ + u32 client_index; + u32 context; + u32 sa_id; +}; +define ipsec_sa_v3_dump +{ u32 client_index; u32 context; u32 sa_id; @@ -491,60 +433,51 @@ define ipsec_sa_dump { /** \brief IPsec security association database response @param context - sender context which was passed in the request - @param sa_id - SA ID, policy-based SAs >=0, tunnel interface SAs = 0 + @param entry - The SA details @param sw_if_index - sw_if_index of tunnel interface, policy-based SAs = ~0 - @param spi - security parameter index - @param protocol - IPsec protocol (value from ipsec_protocol_t) - @param crypto_alg - crypto algorithm (value from ipsec_crypto_alg_t) - @param crypto_key_len - length of crypto_key in bytes - @param crypto_key - crypto keying material - @param integ_alg - integrity algorithm (value from ipsec_integ_alg_t) - @param integ_key_len - length of integ_key in bytes - @param integ_key - integrity keying material - @param use_esn - using extended sequence numbers when non-zero - @param use_anti_replay - using anti-replay window when non-zero - @param is_tunnel - IPsec tunnel mode when non-zero, else transport mode - @param is_tunnel_ipv6 - If using tunnel mode, endpoints are IPv6 - @param tunnel_src_addr - Tunnel source address if using tunnel mode - @param tunnel_dst_addr - Tunnel destination address is using tunnel mode - @param salt - 4 byte salt + @param salt - 4 byte salt @param seq - current sequence number for outbound - @param seq_hi - high 32 bits of ESN for outbound + @param seq_hi - high 32 bits of ESN for outbound @param last_seq - highest sequence number received inbound @param last_seq_hi - high 32 bits of highest ESN received inbound @param replay_window - bit map of seq nums received relative to last_seq if using anti-replay - @param total_data_size - total bytes sent or received - @param udp_encap - 1 if UDP encap enabled, 0 otherwise + @param stat_index - index for the SA in the stats segment @ /net/ipsec/sa */ define ipsec_sa_details { + option deprecated; u32 context; vl_api_ipsec_sad_entry_t entry; - u32 sw_if_index; + vl_api_interface_index_t sw_if_index; u32 salt; u64 seq_outbound; u64 last_seq_inbound; u64 replay_window; - u64 total_data_size; + u32 stat_index; }; +define ipsec_sa_v2_details { + u32 context; + vl_api_ipsec_sad_entry_v2_t entry; -/** \brief Set new SA on IPsec interface - - !! DEPRECATED !! + vl_api_interface_index_t sw_if_index; + u32 salt; + u64 seq_outbound; + u64 last_seq_inbound; + u64 replay_window; - @param client_index - opaque cookie to identify the sender - @param context - sender context, to match reply w/ request - @param sw_if_index - index of tunnel interface - @param sa_id - ID of SA to use - @param is_outbound - 1 if outbound (local) SA, 0 if inbound (remote) -*/ -autoreply define ipsec_tunnel_if_set_sa { - u32 client_index; + u32 stat_index; +}; +define ipsec_sa_v3_details { u32 context; - u32 sw_if_index; - u32 sa_id; - u8 is_outbound; + vl_api_ipsec_sad_entry_v3_t entry; + + vl_api_interface_index_t sw_if_index; + u64 seq_outbound; + u64 last_seq_inbound; + u64 replay_window; + + u32 stat_index; }; /** \brief Dump IPsec backends @@ -564,10 +497,10 @@ define ipsec_backend_dump { */ define ipsec_backend_details { u32 context; - u8 name[128]; + string name[128]; vl_api_ipsec_proto_t protocol; u8 index; - u8 active; + bool active; }; /** \brief Select IPsec backend @@ -583,9 +516,300 @@ autoreply define ipsec_select_backend { u8 index; }; + +/** \brief IPsec Set Async mode + @param client_index - opaque cookie to identify the sender + @param context - sender context, to match reply w/ request + @param async_enable - ipsec async mode on or off +*/ +autoreply define ipsec_set_async_mode { + u32 client_index; + u32 context; + bool async_enable; +}; + +counters esp_decrypt { + rx_pkts { + severity info; + type counter64; + units "packets"; + description "ESP pkts received"; + }; + rx_post_pkts { + severity info; + type counter64; + units "packets"; + description "ESP-POST pkts received"; + }; + handoff { + severity info; + type counter64; + units "packets"; + description "hand-off"; + }; + decryption_failed { + severity error; + type counter64; + units "packets"; + description "ESP decryption failed"; + }; + integ_error { + severity error; + type counter64; + units "packets"; + description "integrity check failed"; + }; + crypto_engine_error { + severity error; + type counter64; + units "packets"; + description "crypto engine error (packet dropped)"; + }; + replay { + severity error; + type counter64; + units "packets"; + description "SA replayed packet"; + }; + runt { + severity error; + type counter64; + units "packets"; + description "undersized packet"; + }; + no_buffers { + severity error; + type counter64; + units "packets"; + description "no buffers (packet dropped)"; + }; + oversized_header { + severity error; + type counter64; + units "packets"; + description "buffer with oversized header (dropped)"; + }; + no_tail_space { + severity error; + type counter64; + units "packets"; + description "no enough buffer tail space (dropped)"; + }; + tun_no_proto { + severity error; + type counter64; + units "packets"; + description "no tunnel protocol"; + }; + unsup_payload { + severity error; + type counter64; + units "packets"; + description "unsupported payload"; + }; + no_avail_frame { + severity error; + type counter64; + units "packets"; + description "no available frame (packet dropped)"; + }; +}; + +counters esp_encrypt { + rx_pkts { + severity info; + type counter64; + units "packets"; + description "ESP pkts received"; + }; + post_rx_pkts { + severity info; + type counter64; + units "packets"; + description "ESP-post pkts received"; + }; + handoff { + severity info; + type counter64; + units "packets"; + description "Hand-off"; + }; + seq_cycled { + severity error; + type counter64; + units "packets"; + description "sequence number cycled (packet dropped)"; + }; + crypto_engine_error { + severity error; + type counter64; + units "packets"; + description "crypto engine error (packet dropped)"; + }; + crypto_queue_full { + severity error; + type counter64; + units "packets"; + description "crypto queue full (packet dropped)"; + }; + no_buffers { + severity error; + type counter64; + units "packets"; + description "no buffers (packet dropped)"; + }; + no_protection { + severity error; + type counter64; + units "packets"; + description "no protecting SA (packet dropped)"; + }; + no_encryption { + severity error; + type counter64; + units "packets"; + description "no Encrypting SA (packet dropped)"; + }; + no_avail_frame { + severity error; + type counter64; + units "packets"; + description "no available frame (packet dropped)"; + }; +}; + +counters ah_encrypt { + rx_pkts { + severity info; + type counter64; + units "packets"; + description "AH pkts received"; + }; + crypto_engine_error { + severity error; + type counter64; + units "packets"; + description "crypto engine error (packet dropped)"; + }; + seq_cycled { + severity error; + type counter64; + units "packets"; + description "sequence number cycled (packet dropped)"; + }; +}; + +counters ah_decrypt { + rx_pkts { + severity info; + type counter64; + units "packets"; + description "AH pkts received"; + }; + decryption_failed { + severity error; + type counter64; + units "packets"; + description "AH decryption failed"; + }; + integ_error { + severity error; + type counter64; + units "packets"; + description "Integrity check failed"; + }; + no_tail_space { + severity error; + type counter64; + units "packets"; + description "not enough buffer tail space (dropped)"; + }; + drop_fragments { + severity error; + type counter64; + units "packets"; + description "IP fragments drop"; + }; + replay { + severity error; + type counter64; + units "packets"; + description "SA replayed packet"; + }; +}; + +counters ipsec_tun { + rx { + severity info; + type counter64; + units "packets"; + description "good packets received"; + }; + disabled { + severity error; + type counter64; + units "packets"; + description "ipsec packets received on disabled interface"; + }; + no_tunnel { + severity error; + type counter64; + units "packets"; + description "no matching tunnel"; + }; + tunnel_mismatch { + severity error; + type counter64; + units "packets"; + description "SPI-tunnel mismatch"; + }; + nat_keepalive { + severity info; + type counter64; + units "packets"; + description "NAT Keepalive"; + }; + too_short { + severity error; + type counter64; + units "packets"; + description "Too Short"; + }; + spi_0 { + severity info; + type counter64; + units "packets"; + description "SPI 0"; + }; +}; + +paths { + "/err/esp4-encrypt" "esp_encrypt"; + "/err/esp4-encrypt-post" "esp_encrypt"; + "/err/esp4-encrypt-tun" "esp_encrypt"; + "/err/esp4-encrypt-tun-post" "esp_encrypt"; + "/err/esp6-encrypt" "esp_encrypt"; + "/err/esp6-encrypt-post" "esp_encrypt"; + "/err/esp6-encrypt-tun" "esp_encrypt"; + "/err/esp6-encrypt-tun-post" "esp_encrypt"; + "/err/esp-mpls-encrypt-tun" "esp_encrypt"; + "/err/esp-mpls-encrypt-tun-post" "esp_encrypt"; + "/err/esp4-decrypt" "esp_decrypt"; + "/err/esp4-decrypt-post" "esp_decrypt"; + "/err/esp4-decrypt-tun" "esp_decrypt"; + "/err/esp4-decrypt-tun-post" "esp_decrypt"; + "/err/esp6-decrypt" "esp_decrypt"; + "/err/esp6-decrypt-post" "esp_decrypt"; + "/err/esp6-decrypt-tun" "esp_decrypt"; + "/err/esp6-decrypt-tun-post" "esp_decrypt"; + "/err/ah4-encrypt" "ah_encrypt"; + "/err/ah6-encrypt" "ah_encrypt"; + "/err/ipsec4-tun-input" "ipsec_tun"; + "/err/ipsec6-tun-input" "ipsec_tun"; +}; + /* * Local Variables: * eval: (c-set-style "gnu") * End: */ -