X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=src%2Fvnet%2Fipsec%2Fipsec.api;h=e6e1ce3667bea97a0c9c7aa6aa91de9232702925;hb=1ba5bc8d8;hp=203c52724329303c51f76df855960c1744ee1624;hpb=11b8dbf78af49d270a0e72abe7dea73eec30d85f;p=vpp.git diff --git a/src/vnet/ipsec/ipsec.api b/src/vnet/ipsec/ipsec.api index 203c5272432..e6e1ce3667b 100644 --- a/src/vnet/ipsec/ipsec.api +++ b/src/vnet/ipsec/ipsec.api @@ -1,3 +1,4 @@ +/* Hey Emacs use -*- mode: C -*- */ /* * Copyright (c) 2015-2016 Cisco and/or its affiliates. * Licensed under the Apache License, Version 2.0 (the "License"); @@ -13,6 +14,10 @@ * limitations under the License. */ +option version = "3.0.0"; + +import "vnet/ip/ip_types.api"; + /** \brief IPsec: Add/delete Security Policy Database @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request @@ -48,447 +53,484 @@ autoreply define ipsec_interface_add_del_spd u32 spd_id; }; -/** \brief IPsec: Add/delete Security Policy Database entry + +enum ipsec_spd_action +{ + /* bypass - no IPsec processing */ + IPSEC_API_SPD_ACTION_BYPASS = 0, + /* discard - discard packet with ICMP processing */ + IPSEC_API_SPD_ACTION_DISCARD, + /* resolve - send request to control plane for SA resolving */ + IPSEC_API_SPD_ACTION_RESOLVE, + /* protect - apply IPsec policy using following parameters */ + IPSEC_API_SPD_ACTION_PROTECT, +}; + +/** \brief IPsec: Security Policy Database entry See RFC 4301, 4.4.1.1 on how to match packet to selectors - @param client_index - opaque cookie to identify the sender - @param context - sender context, to match reply w/ request - @param is_add - add SPD if non-zero, else delete @param spd_id - SPD instance id (control plane allocated) @param priority - priority of SPD entry (non-unique value). Used to order SPD matching - higher priorities match before lower @param is_outbound - entry applies to outbound traffic if non-zero, otherwise applies to inbound traffic - @param is_ipv6 - remote/local address are IPv6 if non-zero, else IPv4 @param remote_address_start - start of remote address range to match @param remote_address_stop - end of remote address range to match @param local_address_start - start of local address range to match @param local_address_stop - end of local address range to match - @param protocol - protocol type to match [0 means any] + @param protocol - protocol type to match [0 means any] otherwise IANA value @param remote_port_start - start of remote port range to match ... @param remote_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE] @param local_port_start - start of local port range to match ... @param local_port_stop - end of remote port range to match [0 to 65535 means ANY, 65535 to 0 means OPAQUE] - @param policy - 0 = bypass (no IPsec processing), 1 = discard (discard packet with ICMP processing), 2 = resolve (send request to control plane for SA resolving, and discard without ICMP processing), 3 = protect (apply IPsec policy using following parameters) + @param policy - action to perform on match @param sa_id - SAD instance id (control plane allocated) - */ - -autoreply define ipsec_spd_add_del_entry +typedef ipsec_spd_entry { - u32 client_index; - u32 context; - u8 is_add; - u32 spd_id; i32 priority; u8 is_outbound; - // Selector - u8 is_ipv6; - u8 is_ip_any; - u8 remote_address_start[16]; - u8 remote_address_stop[16]; - u8 local_address_start[16]; - u8 local_address_stop[16]; - + u32 sa_id; + vl_api_ipsec_spd_action_t policy; u8 protocol; + // Selector + vl_api_address_t remote_address_start; + vl_api_address_t remote_address_stop; + vl_api_address_t local_address_start; + vl_api_address_t local_address_stop; + u16 remote_port_start; u16 remote_port_stop; u16 local_port_start; u16 local_port_stop; - - // Policy - u8 policy; - u32 sa_id; }; -/** \brief IPsec: Add/delete Security Association Database entry +/** \brief IPsec: Add/delete Security Policy Database entry + @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request - @param is_add - add SAD entry if non-zero, else delete - - @param sad_id - sad id + @param is_add - add SPD if non-zero, else delete + @param entry - Description of the entry to add/dell +*/ +define ipsec_spd_entry_add_del +{ + u32 client_index; + u32 context; + u8 is_add; + vl_api_ipsec_spd_entry_t entry; +}; - @param spi - security parameter index +/** \brief IPsec: Reply Add/delete Security Policy Database entry - @param protocol - 0 = AH, 1 = ESP + @param context - sender context, to match reply w/ request + @param retval - success/fail rutrun code + @param stat_index - An index for the policy in the stats segment @ /net/ipec/policy +*/ +define ipsec_spd_entry_add_del_reply +{ + u32 context; + i32 retval; + u32 stat_index; +}; - @param crypto_algorithm - 0 = Null, 1 = AES-CBC-128, 2 = AES-CBC-192, 3 = AES-CBC-256, 4 = 3DES-CBC - @param crypto_key_length - length of crypto_key in bytes - @param crypto_key - crypto keying material +/** \brief Dump IPsec all SPD IDs + @param client_index - opaque cookie to identify the sender + @param context - sender context, to match reply w/ request +*/ +define ipsec_spds_dump { + u32 client_index; + u32 context; +}; - @param integrity_algorithm - 0 = None, 1 = MD5-96, 2 = SHA1-96, 3 = SHA-256, 4 = SHA-384, 5=SHA-512 - @param integrity_key_length - length of integrity_key in bytes - @param integrity_key - integrity keying material +/** \brief Dump IPsec all SPD IDs response + @param client_index - opaque cookie to identify the sender + @param spd_id - SPD instance id (control plane allocated) + @param npolicies - number of policies in SPD +*/ +define ipsec_spds_details { + u32 context; + u32 spd_id; + u32 npolicies; +}; - @param use_extended_sequence_number - use ESN when non-zero +/** \brief Dump ipsec policy database data + @param client_index - opaque cookie to identify the sender + @param context - sender context, to match reply w/ request + @param spd_id - SPD instance id + @param sa_id - SA id, optional, set to ~0 to see all policies in SPD +*/ +define ipsec_spd_dump { + u32 client_index; + u32 context; + u32 spd_id; + u32 sa_id; +}; - @param is_tunnel - IPsec tunnel mode if non-zero, else transport mode - @param is_tunnel_ipv6 - IPsec tunnel mode is IPv6 if non-zero, else IPv4 tunnel only valid if is_tunnel is non-zero - @param tunnel_src_address - IPsec tunnel source address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero - @param tunnel_dst_address - IPsec tunnel destination address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero +/** \brief IPsec policy database response + @param context - sender context which was passed in the request + €param entry - The SPD entry. + @param bytes - byte count of packets matching this policy + @param packets - count of packets matching this policy +*/ +define ipsec_spd_details { + u32 context; + vl_api_ipsec_spd_entry_t entry; +}; - To be added: - Anti-replay - IPsec tunnel address copy mode (to support GDOI) +/* + * @brief Support cryptographic algorithms */ - -autoreply define ipsec_sad_add_del_entry +enum ipsec_crypto_alg { - u32 client_index; - u32 context; - u8 is_add; - - u32 sad_id; - - u32 spi; - - u8 protocol; + IPSEC_API_CRYPTO_ALG_NONE = 0, + IPSEC_API_CRYPTO_ALG_AES_CBC_128, + IPSEC_API_CRYPTO_ALG_AES_CBC_192, + IPSEC_API_CRYPTO_ALG_AES_CBC_256, + IPSEC_API_CRYPTO_ALG_AES_CTR_128, + IPSEC_API_CRYPTO_ALG_AES_CTR_192, + IPSEC_API_CRYPTO_ALG_AES_CTR_256, + IPSEC_API_CRYPTO_ALG_AES_GCM_128, + IPSEC_API_CRYPTO_ALG_AES_GCM_192, + IPSEC_API_CRYPTO_ALG_AES_GCM_256, + IPSEC_API_CRYPTO_ALG_DES_CBC, + IPSEC_API_CRYPTO_ALG_3DES_CBC, +}; - u8 crypto_algorithm; - u8 crypto_key_length; - u8 crypto_key[128]; +/* + * @brief Supported Integrity Algorithms + */ +enum ipsec_integ_alg +{ + IPSEC_API_INTEG_ALG_NONE = 0, + /* RFC2403 */ + IPSEC_API_INTEG_ALG_MD5_96, + /* RFC2404 */ + IPSEC_API_INTEG_ALG_SHA1_96, + /* draft-ietf-ipsec-ciph-sha-256-00 */ + IPSEC_API_INTEG_ALG_SHA_256_96, + /* RFC4868 */ + IPSEC_API_INTEG_ALG_SHA_256_128, + /* RFC4868 */ + IPSEC_API_INTEG_ALG_SHA_384_192, + /* RFC4868 */ + IPSEC_API_INTEG_ALG_SHA_512_256, +}; - u8 integrity_algorithm; - u8 integrity_key_length; - u8 integrity_key[128]; +enum ipsec_sad_flags +{ + IPSEC_API_SAD_FLAG_NONE = 0, + /* Enable extended sequence numbers */ + IPSEC_API_SAD_FLAG_USE_EXTENDED_SEQ_NUM = 0x01, + /* Enable Anti-replay */ + IPSEC_API_SAD_FLAG_USE_ANTI_REPLAY = 0x02, + /* IPsec tunnel mode if non-zero, else transport mode */ + IPSEC_API_SAD_FLAG_IS_TUNNEL = 0x04, + /* IPsec tunnel mode is IPv6 if non-zero, + * else IPv4 tunnel only valid if is_tunnel is non-zero */ + IPSEC_API_SAD_FLAG_IS_TUNNEL_V6 = 0x08, + /* enable UDP encapsulation for NAT traversal */ + IPSEC_API_SAD_FLAG_UDP_ENCAP = 0x10, +}; - u8 use_extended_sequence_number; +enum ipsec_proto +{ + IPSEC_API_PROTO_ESP, + IPSEC_API_PROTO_AH, +}; - u8 is_tunnel; - u8 is_tunnel_ipv6; - u8 tunnel_src_address[16]; - u8 tunnel_dst_address[16]; +typedef key +{ + /* the length of the key */ + u8 length; + /* The data for the key */ + u8 data[128]; }; -/** \brief IPsec: Update Security Association keys +/** \brief IPsec: Security Association Database entry @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request - - @param sa_id - sa id - - @param crypto_key_length - length of crypto_key in bytes + @param is_add - add SAD entry if non-zero, else delete + @param sad_id - sad id + @param spi - security parameter index + @param protocol - 0 = AH, 1 = ESP + @param crypto_algorithm - a supported crypto algorithm @param crypto_key - crypto keying material - - @param integrity_key_length - length of integrity_key in bytes + @param integrity_algorithm - one of the supported algorithms @param integrity_key - integrity keying material -*/ - -autoreply define ipsec_sa_set_key + @param tunnel_src_address - IPsec tunnel source address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero + @param tunnel_dst_address - IPsec tunnel destination address IPv6 if is_tunnel_ipv6 is non-zero, else IPv4. Only valid if is_tunnel is non-zero + @param tx_table_id - the FIB id used for encapsulated packets + */ +typedef ipsec_sad_entry { - u32 client_index; - u32 context; + u32 sad_id; - u32 sa_id; + u32 spi; + + vl_api_ipsec_proto_t protocol; - u8 crypto_key_length; - u8 crypto_key[128]; + vl_api_ipsec_crypto_alg_t crypto_algorithm; + vl_api_key_t crypto_key; - u8 integrity_key_length; - u8 integrity_key[128]; + vl_api_ipsec_integ_alg_t integrity_algorithm; + vl_api_key_t integrity_key; + + vl_api_ipsec_sad_flags_t flags; + + vl_api_address_t tunnel_src; + vl_api_address_t tunnel_dst; + u32 tx_table_id; }; -/** \brief IKEv2: Add/delete profile +/** \brief IPsec: Add/delete Security Association Database entry @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request - - @param name - IKEv2 profile name - @param is_add - Add IKEv2 profile if non-zero, else delete -*/ -autoreply define ikev2_profile_add_del + @param entry - Entry to add or delete + */ +define ipsec_sad_entry_add_del { u32 client_index; u32 context; - - u8 name[64]; u8 is_add; + vl_api_ipsec_sad_entry_t entry; }; - -/** \brief IKEv2: Set IKEv2 profile authentication method - @param client_index - opaque cookie to identify the sender - @param context - sender context, to match reply w/ request - - @param name - IKEv2 profile name - @param auth_method - IKEv2 authentication method (shared-key-mic/rsa-sig) - @param is_hex - Authentication data in hex format if non-zero, else string - @param data_len - Authentication data length - @param data - Authentication data (for rsa-sig cert file path) -*/ -autoreply define ikev2_profile_set_auth +define ipsec_sad_entry_add_del_reply { - u32 client_index; u32 context; - - u8 name[64]; - u8 auth_method; - u8 is_hex; - u32 data_len; - u8 data[0]; + i32 retval; + u32 stat_index; }; -/** \brief IKEv2: Set IKEv2 profile local/remote identification +/** \brief IPsec: Update Security Association keys @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request - @param name - IKEv2 profile name - @param is_local - Identification is local if non-zero, else remote - @param id_type - Identification type - @param data_len - Identification data length - @param data - Identification data + @param sa_id - sa id + + @param crypto_key - crypto keying material + @param integrity_key - integrity keying material */ -autoreply define ikev2_profile_set_id + +autoreply define ipsec_sa_set_key { u32 client_index; u32 context; - u8 name[64]; - u8 is_local; - u8 id_type; - u32 data_len; - u8 data[0]; + u32 sa_id; + + vl_api_key_t crypto_key; + vl_api_key_t integrity_key; }; -/** \brief IKEv2: Set IKEv2 profile traffic selector parameters +/** \brief IPsec: Get SPD interfaces @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request - - @param name - IKEv2 profile name - @param is_local - Traffic selector is local if non-zero, else remote - @param proto - Traffic selector IP protocol (if zero not relevant) - @param start_port - The smallest port number allowed by traffic selector - @param end_port - The largest port number allowed by traffic selector - @param start_addr - The smallest address included in traffic selector - @param end_addr - The largest address included in traffic selector + @param spd_index - SPD index + @param spd_index_valid - if 1 spd_index is used to filter + spd_index's, if 0 no filtering is done */ -autoreply define ikev2_profile_set_ts -{ - u32 client_index; - u32 context; +define ipsec_spd_interface_dump { + u32 client_index; + u32 context; + u32 spd_index; + u8 spd_index_valid; +}; - u8 name[64]; - u8 is_local; - u8 proto; - u16 start_port; - u16 end_port; - u32 start_addr; - u32 end_addr; +/** \brief IPsec: SPD interface response + @param context - sender context which was passed in the request + @param spd_index - SPD index + @param sw_if_index - index of the interface +*/ +define ipsec_spd_interface_details { + u32 context; + u32 spd_index; + u32 sw_if_index; }; -/** \brief IKEv2: Set IKEv2 local RSA private key +/** \brief Add or delete IPsec tunnel interface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request - - @param key_file - Key file absolute path + @param is_add - add IPsec tunnel interface if nonzero, else delete + @param is_ip6 - tunnel v6 or v4 + @param esn - enable extended sequence numbers if nonzero, else disable + @param anti_replay - enable anti replay check if nonzero, else disable + @param local_ip - local IP address + @param remote_ip - IP address of remote IPsec peer + @param local_spi - SPI of outbound IPsec SA + @param remote_spi - SPI of inbound IPsec SA + @param crypto_alg - encryption algorithm ID + @param local_crypto_key_len - length of local crypto key in bytes + @param local_crypto_key - crypto key for outbound IPsec SA + @param remote_crypto_key_len - length of remote crypto key in bytes + @param remote_crypto_key - crypto key for inbound IPsec SA + @param integ_alg - integrity algorithm ID + @param local_integ_key_len - length of local integrity key in bytes + @param local_integ_key - integrity key for outbound IPsec SA + @param remote_integ_key_len - length of remote integrity key in bytes + @param remote_integ_key - integrity key for inbound IPsec SA + @param renumber - intf display name uses a specified instance if != 0 + @param show_instance - instance to display for intf if renumber is set + @param udp_encap - enable UDP encapsulation for NAT traversal + @param tx_table_id - the FIB id used after packet encap */ -autoreply define ikev2_set_local_key -{ +define ipsec_tunnel_if_add_del { u32 client_index; u32 context; - - u8 key_file[256]; + u8 is_add; + u8 esn; + u8 anti_replay; + vl_api_address_t local_ip; + vl_api_address_t remote_ip; + u32 local_spi; + u32 remote_spi; + u8 crypto_alg; + u8 local_crypto_key_len; + u8 local_crypto_key[128]; + u8 remote_crypto_key_len; + u8 remote_crypto_key[128]; + u8 integ_alg; + u8 local_integ_key_len; + u8 local_integ_key[128]; + u8 remote_integ_key_len; + u8 remote_integ_key[128]; + u8 renumber; + u32 show_instance; + u8 udp_encap; + u32 tx_table_id; }; -/** \brief IKEv2: Set IKEv2 responder interface and IP address - @param client_index - opaque cookie to identify the sender +/** \brief Add/delete IPsec tunnel interface response @param context - sender context, to match reply w/ request - - @param name - IKEv2 profile name - @param sw_if_index - interface index - @param address - interface address + @param retval - return status + @param sw_if_index - sw_if_index of new interface (for successful add) */ -autoreply define ikev2_set_responder -{ - u32 client_index; +define ipsec_tunnel_if_add_del_reply { u32 context; - - u8 name[64]; + i32 retval; u32 sw_if_index; - u8 address[4]; }; -/** \brief IKEv2: Set IKEv2 IKE transforms in SA_INIT proposal (RFC 7296) +/** \brief Dump IPsec security association @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request - - @param name - IKEv2 profile name - @param crypto_alg - encryption algorithm - @param crypto_key_size - encryption key size - @param integ_alg - integrity algorithm - @param dh_group - Diffie-Hellman group - + @param sa_id - optional ID of an SA to dump, if ~0 dump all SAs in SAD */ -autoreply define ikev2_set_ike_transforms -{ +define ipsec_sa_dump { u32 client_index; u32 context; - - u8 name[64]; - u32 crypto_alg; - u32 crypto_key_size; - u32 integ_alg; - u32 dh_group; + u32 sa_id; }; -/** \brief IKEv2: Set IKEv2 ESP transforms in SA_INIT proposal (RFC 7296) - @param client_index - opaque cookie to identify the sender - @param context - sender context, to match reply w/ request - - @param name - IKEv2 profile name - @param crypto_alg - encryption algorithm - @param crypto_key_size - encryption key size - @param integ_alg - integrity algorithm - @param dh_group - Diffie-Hellman group - +/** \brief IPsec security association database response + @param context - sender context which was passed in the request + @param sa_id - SA ID, policy-based SAs >=0, tunnel interface SAs = 0 + @param sw_if_index - sw_if_index of tunnel interface, policy-based SAs = ~0 + @param spi - security parameter index + @param protocol - IPsec protocol (value from ipsec_protocol_t) + @param crypto_alg - crypto algorithm (value from ipsec_crypto_alg_t) + @param crypto_key_len - length of crypto_key in bytes + @param crypto_key - crypto keying material + @param integ_alg - integrity algorithm (value from ipsec_integ_alg_t) + @param integ_key_len - length of integ_key in bytes + @param integ_key - integrity keying material + @param use_esn - using extended sequence numbers when non-zero + @param use_anti_replay - using anti-replay window when non-zero + @param is_tunnel - IPsec tunnel mode when non-zero, else transport mode + @param is_tunnel_ipv6 - If using tunnel mode, endpoints are IPv6 + @param tunnel_src_addr - Tunnel source address if using tunnel mode + @param tunnel_dst_addr - Tunnel destination address is using tunnel mode + @param salt - 4 byte salt + @param seq - current sequence number for outbound + @param seq_hi - high 32 bits of ESN for outbound + @param last_seq - highest sequence number received inbound + @param last_seq_hi - high 32 bits of highest ESN received inbound + @param replay_window - bit map of seq nums received relative to last_seq if using anti-replay + @param total_data_size - total bytes sent or received + @param udp_encap - 1 if UDP encap enabled, 0 otherwise */ -autoreply define ikev2_set_esp_transforms -{ - u32 client_index; +define ipsec_sa_details { u32 context; + vl_api_ipsec_sad_entry_t entry; + + u32 sw_if_index; + u32 salt; + u64 seq_outbound; + u64 last_seq_inbound; + u64 replay_window; - u8 name[64]; - u32 crypto_alg; - u32 crypto_key_size; - u32 integ_alg; - u32 dh_group; + u64 total_data_size; }; -/** \brief IKEv2: Set Child SA lifetime, limited by time and/or data +/** \brief Set key on IPsec interface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request - - @param name - IKEv2 profile name - @param lifetime - SA maximum life time in seconds (0 to disable) - @param lifetime_jitter - Jitter added to prevent simultaneounus rekeying - @param handover - Hand over time - @param lifetime_maxdata - SA maximum life time in bytes (0 to disable) - + @param sw_if_index - index of tunnel interface + @param key_type - type of key being set + @param alg - algorithm used with key + @param key_len - length key in bytes + @param key - key */ -autoreply define ikev2_set_sa_lifetime -{ +autoreply define ipsec_tunnel_if_set_key { u32 client_index; u32 context; - - u8 name[64]; - u64 lifetime; - u32 lifetime_jitter; - u32 handover; - u64 lifetime_maxdata; + u32 sw_if_index; + u8 key_type; + u8 alg; + u8 key_len; + u8 key[128]; }; -/** \brief IKEv2: Initiate the SA_INIT exchange +/** \brief Set new SA on IPsec interface @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request - - @param name - IKEv2 profile name - + @param sw_if_index - index of tunnel interface + @param sa_id - ID of SA to use + @param is_outbound - 1 if outbound (local) SA, 0 if inbound (remote) */ -autoreply define ikev2_initiate_sa_init -{ +autoreply define ipsec_tunnel_if_set_sa { u32 client_index; u32 context; - - u8 name[64]; + u32 sw_if_index; + u32 sa_id; + u8 is_outbound; }; -/** \brief IKEv2: Initiate the delete IKE SA exchange +/** \brief Dump IPsec backends @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request - - @param ispi - IKE SA initiator SPI - */ -autoreply define ikev2_initiate_del_ike_sa -{ +define ipsec_backend_dump { u32 client_index; u32 context; - - u64 ispi; }; -/** \brief IKEv2: Initiate the delete Child SA exchange - @param client_index - opaque cookie to identify the sender - @param context - sender context, to match reply w/ request - - @param ispi - Child SA initiator SPI - +/** \brief IPsec backend details + @param name - name of the backend + @param protocol - IPsec protocol (value from ipsec_protocol_t) + @param index - backend index + @param active - set to 1 if the backend is active, otherwise 0 */ -autoreply define ikev2_initiate_del_child_sa -{ - u32 client_index; +define ipsec_backend_details { u32 context; - - u32 ispi; + u8 name[128]; + vl_api_ipsec_proto_t protocol; + u8 index; + u8 active; }; -/** \brief IKEv2: Initiate the rekey Child SA exchange +/** \brief Select IPsec backend @param client_index - opaque cookie to identify the sender @param context - sender context, to match reply w/ request - - @param ispi - Child SA initiator SPI - + @param protocol - IPsec protocol (value from ipsec_protocol_t) + @param index - backend index */ -autoreply define ikev2_initiate_rekey_child_sa -{ +autoreply define ipsec_select_backend { u32 client_index; u32 context; - - u32 ispi; -}; - -/** \brief Dump ipsec policy database data - @param client_index - opaque cookie to identify the sender - @param context - sender context, to match reply w/ request - @param spd_id - SPD instance id - @param sa_id - SA id, optional, set to ~0 to see all policies in SPD -*/ -define ipsec_spd_dump { - u32 client_index; - u32 context; - u32 spd_id; - u32 sa_id; -}; - -/** \brief IPsec policy database response - @param context - sender context which was passed in the request - @param spd_id - SPD instance id - @param priority - numeric value to control policy evaluation order - @param is_outbound - [1|0] to indicate if direction is [out|in]bound - @param is_ipv6 - [1|0] to indicate if address family is ipv[6|4] - @param local_start_addr - first address in local traffic selector range - @param local_stop_addr - last address in local traffic selector range - @param local_start_port - first port in local traffic selector range - @param local_stop_port - last port in local traffic selector range - @param remote_start_addr - first address in remote traffic selector range - @param remote_stop_addr - last address in remote traffic selector range - @param remote_start_port - first port in remote traffic selector range - @param remote_stop_port - last port in remote traffic selector range - @param protocol - traffic selector protocol - @param policy - policy action - @param sa_id - SA id - @param bytes - byte count of packets matching this policy - @param packets - count of packets matching this policy -*/ - -define ipsec_spd_details { - u32 context; - u32 spd_id; - i32 priority; - u8 is_outbound; - u8 is_ipv6; - u8 local_start_addr[16]; - u8 local_stop_addr[16]; - u16 local_start_port; - u16 local_stop_port; - u8 remote_start_addr[16]; - u8 remote_stop_addr[16]; - u16 remote_start_port; - u16 remote_stop_port; - u8 protocol; - u8 policy; - u32 sa_id; - u64 bytes; - u64 packets; + vl_api_ipsec_proto_t protocol; + u8 index; }; /*