X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=test%2Ftest_ip6.py;h=167267980087ac81be47b06ccffda962411090b1;hb=e46bd4cac4b80c553d39dbc2a06e5dd3f8eef671;hp=a3da6650d8b9bd8e1e1ce9a5a380f10eeff50e7e;hpb=e988726cbfb1b1f618c4034aa16e41364f9c48a2;p=vpp.git diff --git a/test/test_ip6.py b/test/test_ip6.py index a3da6650d8b..16726798008 100644 --- a/test/test_ip6.py +++ b/test/test_ip6.py @@ -7,6 +7,7 @@ import unittest from parameterized import parameterized import scapy.compat import scapy.layers.inet6 as inet6 +from scapy.layers.inet import UDP from scapy.contrib.mpls import MPLS from scapy.layers.inet6 import IPv6, ICMPv6ND_NS, ICMPv6ND_RS, \ ICMPv6ND_RA, ICMPv6NDOptMTU, ICMPv6NDOptSrcLLAddr, ICMPv6NDOptPrefixInfo, \ @@ -22,13 +23,14 @@ from six import moves from framework import VppTestCase, VppTestRunner, tag_run_solo from util import ppp, ip6_normalize, mk_ll_addr from vpp_papi import VppEnum -from vpp_ip import DpoProto, VppIpPuntPolicer, VppIpPuntRedirect +from vpp_ip import DpoProto, VppIpPuntPolicer, VppIpPuntRedirect, VppIpPathMtu from vpp_ip_route import VppIpRoute, VppRoutePath, find_route, VppIpMRoute, \ VppMRoutePath, VppMplsIpBind, \ VppMplsRoute, VppMplsTable, VppIpTable, FibPathType, FibPathProto, \ VppIpInterfaceAddress, find_route_in_dump, find_mroute_in_dump, \ VppIp6LinkLocalAddress from vpp_neighbor import find_nbr, VppNeighbor +from vpp_ipip_tun_interface import VppIpIpTunInterface from vpp_pg_interface import is_ipv6_misc from vpp_sub_interface import VppSubInterface, VppDot1QSubint from vpp_policer import VppPolicer, PolicerAction @@ -2377,6 +2379,50 @@ class TestIP6PuntHandoff(IP6PuntSetup, VppTestCase): self.assertEqual(stats1['exceed_packets'], 0) self.assertEqual(stats1['violate_packets'], 0) + # Bind the policer to worker 1 and repeat + policer.bind_vpp_config(1, True) + for worker in [0, 1]: + self.send_and_expect(self.pg0, pkts, self.pg1, worker=worker) + self.logger.debug(self.vapi.cli("show trace max 100")) + + # The 2 workers should now have policed the same amount + stats = policer.get_stats() + stats0 = policer.get_stats(worker=0) + stats1 = policer.get_stats(worker=1) + + self.assertGreater(stats0['conform_packets'], 0) + self.assertEqual(stats0['exceed_packets'], 0) + self.assertGreater(stats0['violate_packets'], 0) + + self.assertGreater(stats1['conform_packets'], 0) + self.assertEqual(stats1['exceed_packets'], 0) + self.assertGreater(stats1['violate_packets'], 0) + + self.assertEqual(stats0['conform_packets'] + stats1['conform_packets'], + stats['conform_packets']) + + self.assertEqual(stats0['violate_packets'] + stats1['violate_packets'], + stats['violate_packets']) + + # Unbind the policer and repeat + policer.bind_vpp_config(1, False) + for worker in [0, 1]: + self.send_and_expect(self.pg0, pkts, self.pg1, worker=worker) + self.logger.debug(self.vapi.cli("show trace max 100")) + + # The policer should auto-bind to worker 0 when packets arrive + stats = policer.get_stats() + stats0new = policer.get_stats(worker=0) + stats1new = policer.get_stats(worker=1) + + self.assertGreater(stats0new['conform_packets'], + stats0['conform_packets']) + self.assertEqual(stats0new['exceed_packets'], 0) + self.assertGreater(stats0new['violate_packets'], + stats0['violate_packets']) + + self.assertEqual(stats1, stats1new) + # # Clean up # @@ -2992,5 +3038,236 @@ class TestIP6LinkLocal(VppTestCase): self.send_and_expect(self.pg1, [p_echo_request_3], self.pg1) +class TestIPv6PathMTU(VppTestCase): + """ IPv6 Path MTU """ + + def setUp(self): + super(TestIPv6PathMTU, self).setUp() + + self.create_pg_interfaces(range(2)) + + # setup all interfaces + for i in self.pg_interfaces: + i.admin_up() + i.config_ip6() + i.resolve_ndp() + + def tearDown(self): + super(TestIPv6PathMTU, self).tearDown() + for i in self.pg_interfaces: + i.unconfig_ip6() + i.admin_down() + + def test_path_mtu_local(self): + """ Path MTU for attached neighbour """ + + self.vapi.cli("set log class ip level debug") + # + # The goal here is not test that fragmentation works correctly, + # that's done elsewhere, the intent is to ensure that the Path MTU + # settings are honoured. + # + + # + # IPv6 will only frag locally generated packets, so use tunnelled + # packets post encap + # + tun = VppIpIpTunInterface( + self, + self.pg1, + self.pg1.local_ip6, + self.pg1.remote_ip6) + tun.add_vpp_config() + tun.admin_up() + tun.config_ip6() + + # set the interface MTU to a reasonable value + self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index, + [2800, 0, 0, 0]) + + p_2k = (Ether(dst=self.pg0.local_mac, + src=self.pg0.remote_mac) / + IPv6(src=self.pg0.remote_ip6, + dst=tun.remote_ip6) / + UDP(sport=1234, dport=5678) / + Raw(b'0xa' * 1000)) + p_1k = (Ether(dst=self.pg0.local_mac, + src=self.pg0.remote_mac) / + IPv6(src=self.pg0.remote_ip6, + dst=tun.remote_ip6) / + UDP(sport=1234, dport=5678) / + Raw(b'0xa' * 600)) + + nbr = VppNeighbor(self, + self.pg1.sw_if_index, + self.pg1.remote_mac, + self.pg1.remote_ip6).add_vpp_config() + + # this is now the interface MTU frags + self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2) + self.send_and_expect(self.pg0, [p_1k], self.pg1) + + # drop the path MTU for this neighbour to below the interface MTU + # expect more frags + pmtu = VppIpPathMtu(self, self.pg1.remote_ip6, 1300).add_vpp_config() + + # print/format the adj delegate and trackers + self.logger.info(self.vapi.cli("sh ip pmtu")) + self.logger.info(self.vapi.cli("sh adj 7")) + + self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3) + self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2) + + # increase the path MTU to more than the interface + # expect to use the interface MTU + pmtu.modify(8192) + + self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2) + self.send_and_expect(self.pg0, [p_1k], self.pg1) + + # go back to an MTU from the path + pmtu.modify(1300) + + self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3) + self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2) + + # raise the interface's MTU + # should still use that of the path + self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index, + [2000, 0, 0, 0]) + self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3) + self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2) + + # set path high and interface low + pmtu.modify(2000) + self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index, + [1300, 0, 0, 0]) + self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3) + self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2) + + # remove the path MTU + self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index, + [2800, 0, 0, 0]) + pmtu.modify(0) + + self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2) + self.send_and_expect(self.pg0, [p_1k], self.pg1) + + def test_path_mtu_remote(self): + """ Path MTU for remote neighbour """ + + self.vapi.cli("set log class ip level debug") + # + # The goal here is not test that fragmentation works correctly, + # that's done elsewhere, the intent is to ensure that the Path MTU + # settings are honoured. + # + tun_dst = "2001::1" + + route = VppIpRoute( + self, tun_dst, 64, + [VppRoutePath(self.pg1.remote_ip6, + self.pg1.sw_if_index)]).add_vpp_config() + + # + # IPv6 will only frag locally generated packets, so use tunnelled + # packets post encap + # + tun = VppIpIpTunInterface( + self, + self.pg1, + self.pg1.local_ip6, + tun_dst) + tun.add_vpp_config() + tun.admin_up() + tun.config_ip6() + + # set the interface MTU to a reasonable value + self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index, + [2800, 0, 0, 0]) + + p_2k = (Ether(dst=self.pg0.local_mac, + src=self.pg0.remote_mac) / + IPv6(src=self.pg0.remote_ip6, + dst=tun.remote_ip6) / + UDP(sport=1234, dport=5678) / + Raw(b'0xa' * 1000)) + p_1k = (Ether(dst=self.pg0.local_mac, + src=self.pg0.remote_mac) / + IPv6(src=self.pg0.remote_ip6, + dst=tun.remote_ip6) / + UDP(sport=1234, dport=5678) / + Raw(b'0xa' * 600)) + + nbr = VppNeighbor(self, + self.pg1.sw_if_index, + self.pg1.remote_mac, + self.pg1.remote_ip6).add_vpp_config() + + # this is now the interface MTU frags + self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2) + self.send_and_expect(self.pg0, [p_1k], self.pg1) + + # drop the path MTU for this neighbour to below the interface MTU + # expect more frags + pmtu = VppIpPathMtu(self, tun_dst, 1300).add_vpp_config() + + # print/format the fib entry/dpo + self.logger.info(self.vapi.cli("sh ip6 fib 2001::1")) + + self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3) + self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2) + + # increase the path MTU to more than the interface + # expect to use the interface MTU + pmtu.modify(8192) + + self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2) + self.send_and_expect(self.pg0, [p_1k], self.pg1) + + # go back to an MTU from the path + pmtu.modify(1300) + + self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3) + self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2) + + # raise the interface's MTU + # should still use that of the path + self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index, + [2000, 0, 0, 0]) + self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3) + self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2) + + # turn the tun_dst into an attached neighbour + route.modify([VppRoutePath("::", + self.pg1.sw_if_index)]) + nbr2 = VppNeighbor(self, + self.pg1.sw_if_index, + self.pg1.remote_mac, + tun_dst).add_vpp_config() + + self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3) + self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2) + + # add back to not attached + nbr2.remove_vpp_config() + route.modify([VppRoutePath(self.pg1.remote_ip6, + self.pg1.sw_if_index)]) + + # set path high and interface low + pmtu.modify(2000) + self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index, + [1300, 0, 0, 0]) + self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=3) + self.send_and_expect(self.pg0, [p_1k], self.pg1, n_rx=2) + + # remove the path MTU + self.vapi.sw_interface_set_mtu(self.pg1.sw_if_index, + [2800, 0, 0, 0]) + pmtu.remove_vpp_config() + self.send_and_expect(self.pg0, [p_2k], self.pg1, n_rx=2) + self.send_and_expect(self.pg0, [p_1k], self.pg1) + + if __name__ == '__main__': unittest.main(testRunner=VppTestRunner)