X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Ffunc%2Fhoneycomb%2F090_provider_backbone_bridge.robot;fp=tests%2Ffunc%2Fhoneycomb%2F090_provider_backbone_bridge.robot;h=65d5217eb8c1c07c5102d61d17c7286e53623fd0;hb=e87a07f056891f328b22e97f03f4c3ca5231d681;hp=0000000000000000000000000000000000000000;hpb=19c91adadd57bfc4e7514993b2a711a826d52e04;p=csit.git

diff --git a/tests/func/honeycomb/090_provider_backbone_bridge.robot b/tests/func/honeycomb/090_provider_backbone_bridge.robot
new file mode 100644
index 0000000000..65d5217eb8
--- /dev/null
+++ b/tests/func/honeycomb/090_provider_backbone_bridge.robot
@@ -0,0 +1,133 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables***
+| ${super_if}= | ${node['interfaces']['port1']['name']}
+
+*** Settings ***
+| Resource | resources/libraries/robot/honeycomb/provider_backbone_bridge.robot
+| Variables | resources/test_data/honeycomb/pbb/pbb.py
+| Documentation | *Honeycomb provider backbone bridge test suite.*
+| Suite Teardown | Run Keyword If Any Tests Failed
+| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| Force Tags | honeycomb_sanity
+
+*** Test Cases ***
+| TC01: Honeycomb sets PBB sub-interface
+| | [Documentation] | Honeycomb creates a new PBB sub-interface and checks its\
+| | ... | operational data.
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_1_ID}
+| | When Honeycomb creates PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_1_ID} | ${cfg_pbb_sub_if_1}
+| | Then PBB sub interface operational data from Honeycomb should be
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_1_ID} | ${oper_pbb_sub_if_1}
+
+| TC02: Honeycomb modifies existing PBB sub-interface
+| | [Documentation] | Honeycomb modifies an existing PBB sub-interface and\
+| | ... | checks its operational data.
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_1_ID} | ${oper_pbb_sub_if_1}
+| | When Honeycomb creates PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_1_ID} | ${cfg_pbb_sub_if_1_mod}
+| | Then PBB sub interface operational data from Honeycomb should be
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_1_ID}
+| | ... | ${oper_pbb_sub_if_1_mod}
+
+| TC03: Honeycomb deletes existing PBB sub-interface
+| | [Documentation] | Honeycomb deletes an existing PBB sub-interface and\
+| | ... | checks operational data.
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_1_ID}
+| | ... | ${oper_pbb_sub_if_1_mod}
+| | When Honeycomb Removes PBB sub interface
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_1_ID}
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_1_ID}
+
+| TC04: Honeycomb creates two PBB sub-interface
+| | [Documentation] | Honeycomb creates two PBB sub-interfaces on the same\
+| | ... | super interface and checks their operational data.
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_2_ID}
+| | And PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_3_ID}
+| | When Honeycomb creates PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_2_ID} | ${cfg_pbb_sub_if_2}
+| | And Honeycomb creates PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_3_ID} | ${cfg_pbb_sub_if_3}
+| | Then PBB sub interface operational data from Honeycomb should be
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_2_ID} | ${oper_pbb_sub_if_2}
+| | And PBB sub interface operational data from Honeycomb should be
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_3_ID} | ${oper_pbb_sub_if_3}
+
+| TC05: Honeycomb fails to set wrong destination-address for new PBB sub-interface
+| | [Documentation] | Honeycomb fails to create a new PBB sub-interface with\
+| | ... | wrong value of parameter destination-address, type yang:mac-address.
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+| | When Honeycomb fails to create PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_ID} | ${cfg_pbb_sub_if_wrong_dst_addr}
+| | Then PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+
+| TC06: Honeycomb fails to set wrong source-address for new PBB sub-interface
+| | [Documentation] | Honeycomb fails to create a new PBB sub-interface with\
+| | ... | wrong value of parameter source-address, type yang:mac-address.
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+| | When Honeycomb fails to create PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_ID} | ${cfg_pbb_sub_if_wrong_src_addr}
+| | Then PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+
+| TC07: Honeycomb fails to set wrong b-vlan-tag-vlan-id for new PBB sub-interface
+| | [Documentation] | Honeycomb fails to create a new PBB sub-interface with\
+| | ... | wrong value of parameter b-vlan-tag-vlan-id, type uint16, 12 bit\
+| | ... | range, range "1..4095".
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+| | When Honeycomb fails to create PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_ID} | ${cfg_pbb_sub_if_wrong_vlan_tag}
+| | Then PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+
+| TC08: Honeycomb fails to set wrong i-tag-isid for new PBB sub-interface
+| | [Documentation] | Honeycomb fails to create a new PBB sub-interface with\
+| | ... | wrong value of parameter i-tag-isid, type uint32, 24 bit range,\
+| | ... | range "1..16777215".
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+| | When Honeycomb fails to create PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_ID} | ${cfg_pbb_sub_if_wrong_i_tag}
+| | Then PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+
+| TC07: Honeycomb fails to create new PBB sub-interface without vlan tag
+| | [Documentation] | Honeycomb fails to create a new PBB sub-interface without\
+| | ... | parameter b-vlan-tag-vlan-id.
+| | ...
+| | Given PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}
+| | When Honeycomb fails to create PBB sub interface | ${node} | ${super_if}
+| | ... | ${cfg_pbb_sub_if_ID} | ${cfg_pbb_sub_if_no_vlan_tag}
+| | Then PBB sub interface operational data from Honeycomb should be empty
+| | ... | ${node} | ${super_if} | ${cfg_pbb_sub_if_ID}