X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Ffunc%2Fhoneycomb%2Fmgmt-cfg-ietfacl-apihc-apivat-func.robot;fp=tests%2Ffunc%2Fhoneycomb%2Fmgmt-cfg-ietfacl-apihc-apivat-func.robot;h=a0b967980a413b08fb488c0cde8bc7ea9c2ec116;hb=20a24b36a6fc172c209dcc154e138f6e06e85bd5;hp=0000000000000000000000000000000000000000;hpb=a9da1b4ca1e8cccef22a6e2b8bfa859a9ed04555;p=csit.git

diff --git a/tests/func/honeycomb/mgmt-cfg-ietfacl-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-ietfacl-apihc-apivat-func.robot
new file mode 100644
index 0000000000..a0b967980a
--- /dev/null
+++ b/tests/func/honeycomb/mgmt-cfg-ietfacl-apihc-apivat-func.robot
@@ -0,0 +1,374 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables ***
+| &{if_settings}= | enabled=True
+# Bridge domain settings
+| ${bd_name}= | bd1
+| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True}
+| ... | unknown-unicast-flood=${True} | arp-termination=${False}
+| &{bd_if_settings}= | split_horizon_group=${0} | bvi=${False}
+# Names for AC lists
+| ${acl_name_l2}= | acl_l2
+| ${acl_name_l3_ip4}= | acl_l3_ip4
+| ${acl_name_l3_ip6}= | acl_l3_ip6
+| ${acl_name_l4}= | acl_l4
+| ${acl_name_mixed}= | acl_mixed
+| ${acl_name_multirule}= | acl_multirule
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
+| Resource | resources/libraries/robot/honeycomb/access_control_lists.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/traffic.robot
+| Library | resources.libraries.python.honeycomb.HcAPIKwACL.ACLKeywords
+| Library | resources.libraries.python.Trace
+| Library | resources.libraries.python.IPv4Setup
+| Library | resources.libraries.python.IPv4Util
+| Library | resources.libraries.python.IPv6Util
+| Library | resources.libraries.python.Routing
+| Test Teardown | Run Keywords | Clear IETF-ACL settings
+| ... | ${node} | ${dut_to_tg_if1} | AND
+| ... | Show Packet Trace on All DUTs | ${nodes}
+| Suite Teardown | Run Keyword If Any Tests Failed
+| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| Documentation | *Honeycomb access control lists test suite for IETF-ACL node.*
+# Test suite out of date since https://gerrit.fd.io/r/#/c/4331/
+# | Force Tags | Honeycomb_sanity
+
+*** Test Cases ***
+| TC01: L2 ACL MAC filtering through IETF-ACL node
+| | [Documentation]
+| | ... | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv4-TCP.
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\
+| | ... | and configure L2 MAC ACL on ingress interface.
+| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\
+| | ... | using different MACs. Receive all packets except those with\
+| | ... | MACs in the filtered ranges.
+| | [Teardown] | Run Keywords
+| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if1} | AND
+| | ... | Show Packet Trace On All DUTs | ${nodes} | AND
+| | ... | Honeycomb Removes All Bridge Domains
+| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
+| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test
+| | ... | L2 | ${acl_name_l2}
+| | When Honeycomb Creates ACL Chain Through IETF Node
+| | ... | ${dut_node} | ${acl_name_l2} | L2 | ${acl_settings}
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
+| | ... | ${dut_node} | ${dut_to_tg_if1} | L2 | ingress | ${acl_name_l2}
+| | ... | permit
+| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${src_mac}
+| | ... | ${tg_to_dut_if2} | ${dst_mac}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${classify_src}
+| | ... | ${tg_to_dut_if2} | ${classify_dst}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${classify_src2}
+| | ... | ${tg_to_dut_if2} | ${classify_dst2}
+| | ... | TCP | ${src_port} | ${dst_port}
+
+| TC02: L2 ACL MAC filtering through IETF-ACL node on egress interface
+| | [Documentation]
+| | ... | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv4-TCP.
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\
+| | ... | and configure L2 MAC ACL on egress interface.
+| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\
+| | ... | using different MACs. Receive all packets except those with\
+| | ... | MACs in the filtered ranges.
+| | [Teardown] | Run Keywords
+| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if2} | AND
+| | ... | Show Packet Trace On All DUTs | ${nodes} | AND
+| | ... | Honeycomb Removes All Bridge Domains
+| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
+| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test
+| | ... | L2 | ${acl_name_l2}
+| | When Honeycomb Creates ACL Chain Through IETF Node
+| | ... | ${dut_node} | ${acl_name_l2} | L2 | ${acl_settings}
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
+| | ... | ${dut_node} | ${dut_to_tg_if2} | L2 | egress | ${acl_name_l2}
+| | ... | permit
+| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${src_mac}
+| | ... | ${tg_to_dut_if2} | ${dst_mac}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${classify_src}
+| | ... | ${tg_to_dut_if2} | ${classify_dst}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${classify_src2}
+| | ... | ${tg_to_dut_if2} | ${classify_dst2}
+| | ... | TCP | ${src_port} | ${dst_port}
+
+| TC03: L3 ACL IPv4 filtering through IETF-ACL node
+| | [Documentation]
+| | ... | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv4-TCP.
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\
+| | ... | interfaces to TG, add ARP entry and routes, and configure L3 IPv4 ACL\
+| | ... | on ingress interface with src/dst IP and protocol.
+| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\
+| | ... | to the other, using different IPv4 IPs. Receive all packets except\
+| | ... | those with IPs in the filtered ranges and UDP protocol payload.
+| | Given Setup Interface IPs And Routes For IPv4 IETF-ACL Test
+| | ... | L3_IP4 | ${acl_name_l3_ip4}
+| | When Honeycomb Creates ACL Chain Through IETF Node
+| | ... | ${dut_node} | ${acl_name_l3_ip4} | L3_IP4 | ${acl_settings}
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
+| | ... | ${dut_node} | ${dut_to_tg_if1} | L3_IP4 | ingress | ${acl_name_l3_ip4}
+| | ... | permit
+| | Then Send TCP Or UDP Packet | ${tg_node}
+| | ... | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
+| | ... | UDP | ${src_port} | ${dst_port}
+| | And Send TCP Or UDP Packet | ${tg_node}
+| | ... | ${classify_src} | ${classify_dst}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | ${classify_src} | ${classify_dst}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
+| | ... | UDP | ${src_port} | ${dst_port}
+
+| TC04: L3 ACL IPv6 filtering through IETF-ACL node
+| | [Documentation]
+| | ... | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv4-TCP.
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv6 addresses on both\
+| | ... | interfaces to TG, add IP neighbor entry and routes, and configure\
+| | ... | L3 IPv6 ACL on ingress interface with src/dst IP and next-header.
+| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\
+| | ... | to the other, using different IPv6 IPs. Receive all packets except\
+| | ... | those with IPs in the filtered ranges and UDP protocol payload.
+| | Given Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Import Variables | resources/test_data/honeycomb/ietf_acl.py
+| | ... | L3_IP6 | ${acl_name_l3_ip6}
+| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
+# TODO: Configure addresses through Honeycomb when implemented. (Honeycomb-102)
+| | And Set Interface Address | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
+| | And Set Interface Address | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
+| | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2}
+# TODO: Configure route through Honeycomb when implemented.(Honeycomb-58)
+| | And Add IP Neighbor
+| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac}
+| | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length}
+| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False
+| | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length}
+| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False
+| | When Honeycomb Creates ACL Chain Through IETF Node
+| | ... | ${dut_node} | ${acl_name_l3_ip6} | L3_IP6 | ${acl_settings}
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
+| | ... | ${dut_node} | ${dut_to_tg_if1} | L3_IP6 | ingress | ${acl_name_l3_ip6}
+| | ... | permit
+| | Then Send TCP Or UDP Packet | ${tg_node}
+| | ... | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
+| | ... | UDP | ${src_port} | ${dst_port}
+| | And Send TCP Or UDP Packet | ${tg_node}
+| | ... | ${classify_src} | ${classify_dst}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | ${classify_src} | ${classify_dst}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
+| | ... | UDP | ${src_port} | ${dst_port}
+
+| TC05: L4 ACL port filtering through IETF-ACL node
+| | [Documentation]
+| | ... | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv4-TCP.
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\
+| | ... | interfaces to TG, add ARP entry and routes, and configure L4 port ACL\
+| | ... | on ingress interface with src/dst port ranges.
+| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\
+| | ... | to the other, using different ports. Receive all packets except\
+| | ... | those with ports in the filtered ranges.
+| | Given Setup Interface IPs And Routes For IPv4 IETF-ACL Test
+| | ... | L4 | ${acl_name_l4}
+| | When Honeycomb Creates ACL Chain Through IETF Node
+| | ... | ${dut_node} | ${acl_name_l4} | mixed | ${acl_settings}
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
+| | ... | ${dut_node} | ${dut_to_tg_if1} | mixed | ingress | ${acl_name_l4}
+| | ... | permit | L3
+| | Then Send TCP Or UDP Packet | ${tg_node}
+| | ... | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
+| | ... | TCP | ${classify_src} | ${classify_dst}
+
+| TC06: L2,L3 and L4 ACL together on L2-mode interface
+| | [Documentation]
+| | ... | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv4-TCP.
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\
+| | ... | and configure L2, L3 and L4 ACL on ingress interface\
+| | ... | with src/dst MAC, src/dst IP, protocol and src/dst port ranges.
+| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\
+| | ... | to the other, using different MACs, IPv4 IPs and ports. Receive\
+| | ... | all packets except those with MACs, IPs and ports in the filtered\
+| | ... | ranges and UDP protocol payload.
+| | [Teardown] | Run Keywords
+| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if1} | AND
+| | ... | Show Packet Trace On All DUTs | ${nodes} | AND
+| | ... | Honeycomb Removes All Bridge Domains
+| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
+| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test
+| | ... | mixed | ${acl_name_mixed}
+| | When Honeycomb Creates ACL Chain Through IETF Node
+| | ... | ${dut_node} | ${acl_name_mixed} | mixed | ${acl_settings}
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
+| | ... | ${dut_node} | ${dut_to_tg_if1} | mixed | ingress | ${acl_name_mixed}
+| | ... | permit | L2
+| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${classify_src_mac}
+| | ... | ${tg_to_dut_if2} | ${classify_dst_mac}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | ${classify_src_ip} | ${classify_dst_ip}
+| | ... | ${tg_to_dut_if1} | ${classify_src_mac}
+| | ... | ${tg_to_dut_if2} | ${classify_dst_mac}
+| | ... | UDP | ${classify_src_port} | ${classify_dst_port}
+
+| TC07: L2,L3 and L4 ACL together on L3-mode interface
+| | [Documentation]
+| | ... | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv4-TCP.
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\
+| | ... | interfaces to TG, add ARP entry and routes, and configure\
+| | ... | L2, L3 and L4 ACL on ingress interface with src/dst MAC, src/dst IP,\
+| | ... | protocol and src/dst port ranges.
+| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\
+| | ... | to the other, using different MACs, IPv4 IPs and ports. Receive\
+| | ... | all packets except those with MACs, IPs and ports in the filtered\
+| | ... | ranges and UDP protocol payload.
+| | Setup Interface IPs And Routes For IPv4 IETF-ACL Test
+| | ... | mixed | ${acl_name_mixed}
+| | When Honeycomb Creates ACL Chain Through IETF Node
+| | ... | ${dut_node} | ${acl_name_mixed} | mixed | ${acl_settings}
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
+| | ... | ${dut_node} | ${dut_to_tg_if1} | mixed | ingress | ${acl_name_mixed}
+| | ... | permit | L3
+| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${classify_src_mac}
+| | ... | ${tg_to_dut_if2} | ${classify_dst_mac}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node}
+| | ... | ${classify_src_ip} | ${classify_dst_ip}
+| | ... | ${tg_to_dut_if1} | ${classify_src_mac}
+| | ... | ${tg_to_dut_if2} | ${classify_dst_mac}
+| | ... | UDP | ${classify_src_port} | ${classify_dst_port}
+
+| TC08: Multiple classify rules in one ACL
+| | [Documentation]
+| | ... | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv4-TCP.
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\
+| | ... | and configure a series of L2 MAC ACL rules on ingress interface.
+| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\
+| | ... | using different MACs. Receive all packets except those with\
+| | ... | MACs in the ranges filtered by any rule.
+| | [Teardown] | Run Keywords
+| | ... | Clear IETF-ACL Settings | ${node} | ${dut_to_tg_if1} | AND
+| | ... | Show Packet Trace On All DUTs | ${nodes} | AND
+| | ... | Honeycomb Removes All Bridge Domains
+| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
+| | Given Setup Interfaces And Bridge Domain For IETF-ACL Test
+| | ... | multirule | ${acl_name_multirule}
+| | When Honeycomb Creates ACL Chain Through IETF Node
+| | ... | ${dut_node} | ${acl_name_multirule} | L2 | ${acl_settings}
+| | And Honeycomb Assigns IETF-ACL Chain To Interface
+| | ... | ${dut_node} | ${dut_to_tg_if1} | L2 | ingress | ${acl_name_multirule}
+| | ... | permit
+| | Then Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${src_mac}
+| | ... | ${tg_to_dut_if2} | ${dst_mac}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${classify_src}
+| | ... | ${tg_to_dut_if2} | ${classify_dst}
+| | ... | TCP | ${src_port} | ${dst_port}
+| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
+| | ... | Send TCP Or UDP Packet | ${tg_node} | ${src_ip} | ${dst_ip}
+| | ... | ${tg_to_dut_if1} | ${classify_src2}
+| | ... | ${tg_to_dut_if2} | ${classify_dst2}
+| | ... | TCP | ${src_port} | ${dst_port}
+
+*** Keywords ***
+| Setup interface IPs and routes for IPv4 ietf-ACL test
+| | [Arguments] | ${test_data_id} | ${acl_name}
+| | Path for 2-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | Import Variables | resources/test_data/honeycomb/ietf_acl.py
+| | ... | ${test_data_id} | ${acl_name}
+| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | Honeycomb sets interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
+| | Honeycomb sets interface ipv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
+# TODO: Configure routes through Honeycomb when implemented.(Honeycomb-58)
+| | Add ARP on DUT
+| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac}
+| | VPP Route Add
+| | ... | ${node} | ${dst_net} | ${prefix_length} | ${gateway}
+| | ... | interface=${dut_to_tg_if2} | use_sw_index=False
+| | VPP Route Add
+| | ... | ${node} | ${classify_dst_net} | ${prefix_length} | ${gateway}
+| | ... | interface=${dut_to_tg_if2} | use_sw_index=False
+
+| Setup interfaces and bridge domain for ietf-ACL test
+| | [Arguments] | ${test_data_id} | ${acl_name}
+| | Path For 2-node Testing Is Set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | Import Variables | resources/test_data/honeycomb/ietf_acl.py
+| | ... | ${test_data_id} | ${acl_name}
+| | Honeycomb Sets Interface State | ${dut_node} | ${dut_to_tg_if1} | up
+| | Honeycomb Sets Interface State | ${dut_node} | ${dut_to_tg_if2} | up
+| | Honeycomb Creates first L2 Bridge Domain
+| | ... | ${dut_node} | ${bd_name} | ${bd_settings}
+| | Honeycomb Adds Interfaces To Bridge Domain
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
+| | ... | ${bd_name} | ${bd_if_settings}
\ No newline at end of file