X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Ffunc%2Fpolicer%2Fpolicer_ip4.robot;fp=tests%2Ffunc%2Fpolicer%2Fpolicer_ip4.robot;h=0000000000000000000000000000000000000000;hb=982e81efab69bc007455481b6425fcebc7213906;hp=4cb368678871a4c252a3a7b36ccdb4e1fb86ac6d;hpb=c232d04e7a5bffb72063240ee7e15967f46c4873;p=csit.git

diff --git a/tests/func/policer/policer_ip4.robot b/tests/func/policer/policer_ip4.robot
deleted file mode 100644
index 4cb3686788..0000000000
--- a/tests/func/policer/policer_ip4.robot
+++ /dev/null
@@ -1,162 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | VM_ENV | HW_ENV
-| Resource | resources/libraries/robot/policer.robot
-| Library | resources.libraries.python.Trace
-| Test Setup | Run Keywords | Func Test Setup
-| ...        | AND          | Setup Topology for IPv4 policer testing
-| Test Teardown | Func Test Teardown
-| Documentation | *IPv4 policer test cases*
-| ...
-| ... | *[Top] Network topologies:* TG=DUT1 2-node topology with two links\
-| ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 configure interfaces IPv4 adresses,\
-| ... | and static ARP record on the second interface.
-| ... | *[Ver] TG verification:* Test packet is sent from TG on the first link\
-| ... | to DUT1. Packet is received on TG on the second link from DUT1.
-| ... | *[Ref] Applicable standard specifications:* RFC2474, RFC2697, RFC2698.
-
-*** Variables ***
-| ${tg_to_dut_if1_ip4}= | 192.168.122.2
-| ${tg_to_dut_if2_ip4}= | 192.168.123.2
-| ${dut_to_tg_if1_ip4}= | 192.168.122.1
-| ${dut_to_tg_if2_ip4}= | 192.168.123.1
-| ${ip4_plen}= | ${24}
-
-| ${cir}= | ${100}
-| ${eir}= | ${150}
-| ${cb}= | ${200}
-| ${eb}= | ${300}
-
-*** Test Cases ***
-| TC01: VPP policer 2R3C Color-aware marks packet
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Ref] RFC2474, RFC2698.
-| | ... | [Cfg] On DUT1 configure 2R3C color-aware policer on the first\
-| | ... | interface.
-| | ... | [Ver] TG sends IPv4 TCP packet on the first link to DUT1.\
-| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
-| | ... | correct IPv4 TCP packet with correct DSCP on the second link to TG.
-| | ${dscp}= | DSCP AF22
-| | Given Policer Set Name | policer1
-| | And Policer Set Node | ${dut_node}
-| | And Policer Set CIR | ${cir}
-| | And Policer Set EIR | ${eir}
-| | And Policer Set CB | ${cb}
-| | And Policer Set EB | ${eb}
-| | And Policer Set Rate Type pps
-| | And Policer Set Round Type Closest
-| | And Policer Set Type 2R3C 2698
-| | And Policer Set Conform Action Transmit
-| | And Policer Set Exceed Action Mark and Transmit | ${dscp}
-| | And Policer Set Violate Action Drop
-| | And Policer Enable Color Aware
-| | And Policer Classify Set Precolor Exceed
-| | And Policer Classify Set Interface | ${dut_to_tg_if1}
-| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
-| | When Policer Set Configuration
-| | Then Send Packet and Verify Marking | ${tg_node} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
-
-| TC02: VPP policer 2R3C Color-blind marks packet
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Ref] RFC2474, RFC2698.
-| | ... | [Cfg] On DUT1 configure 2R3C color-blind policer on the first\
-| | ... | interface.
-| | ... | [Ver] TG sends IPv4 TCP packet on the first link to DUT1.\
-| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
-| | ... | correct IPv4 TCP packet with correct DSCP on the second link to TG.
-| | ${dscp}= | DSCP AF22
-| | Given Policer Set Name | policer1
-| | And Policer Set Node | ${dut_node}
-| | And Policer Set CIR | ${cir}
-| | And Policer Set EIR | ${eir}
-| | And Policer Set CB | ${cb}
-| | And Policer Set EB | ${eb}
-| | And Policer Set Rate Type pps
-| | And Policer Set Round Type Closest
-| | And Policer Set Type 2R3C 2698
-| | And Policer Set Conform Action Mark and Transmit | ${dscp}
-| | And Policer Set Exceed Action Transmit
-| | And Policer Set Violate Action Drop
-| | And Policer Classify Set Precolor Conform
-| | And Policer Classify Set Interface | ${dut_to_tg_if1}
-| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
-| | When Policer Set Configuration
-| | Then Send Packet and Verify Marking | ${tg_node} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
-
-| TC03: VPP policer 1R3C Color-aware marks packet
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Ref] RFC2474, RFC2697.
-| | ... | [Cfg] On DUT1 configure 1R3C color-aware policer on the first\
-| | ... | interface.
-| | ... | [Ver] TG sends IPv4 TCP packet on the first link to DUT1.\
-| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
-| | ... | correct IPv4 TCP packet with correct DSCP on the second link to TG.
-| | ${dscp}= | DSCP AF22
-| | Given Policer Set Name | policer1
-| | And Policer Set Node | ${dut_node}
-| | And Policer Set CIR | ${1}
-| | And Policer Set CB | ${2}
-| | And Policer Set EB | ${eb}
-| | And Policer Set Rate Type pps
-| | And Policer Set Round Type Closest
-| | And Policer Set Type 1R3C
-| | And Policer Set Conform Action Transmit
-| | And Policer Set Exceed Action Mark and Transmit | ${dscp}
-| | And Policer Set Violate Action Drop
-| | And Policer Enable Color Aware
-| | And Policer Classify Set Precolor Exceed
-| | And Policer Classify Set Interface | ${dut_to_tg_if1}
-| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
-| | When Policer Set Configuration
-| | Then Send Packet and Verify Marking | ${tg_node} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
-
-| TC04: VPP policer 1R3C Color-blind marks packet
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Ref] RFC2474, RFC2697.
-| | ... | [Cfg] On DUT1 configure 1R3C color-blind policer on the first\
-| | ... | interface.
-| | ... | [Ver] TG sends IPv4 TCP packet on the first link to DUT1.\
-| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
-| | ... | correct IPv4 TCP packet with correct DSCP on the second link to TG.
-| | ${dscp}= | DSCP AF22
-| | Given Policer Set Name | policer1
-| | And Policer Set Node | ${dut_node}
-| | And Policer Set CIR | ${cir}
-| | And Policer Set CB | ${cb}
-| | And Policer Set EB | ${eb}
-| | And Policer Set Rate Type pps
-| | And Policer Set Round Type Closest
-| | And Policer Set Type 1R3C
-| | And Policer Set Conform Action Mark and Transmit | ${dscp}
-| | And Policer Set Exceed Action Transmit
-| | And Policer Set Violate Action Drop
-| | And Policer Classify Set Precolor Conform
-| | And Policer Classify Set Interface | ${dut_to_tg_if1}
-| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
-| | When Policer Set Configuration
-| | Then Send Packet and Verify Marking | ${tg_node} | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
\ No newline at end of file