X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Ffunc%2Fvxlan%2Feth2p-ethip4vxlan-l2xcbase-func.robot;fp=tests%2Ffunc%2Fvxlan%2Feth2p-ethip4vxlan-l2xcbase-func.robot;h=de38c56b2d36caaa87393c44a6fcb2571745e095;hb=982e81efab69bc007455481b6425fcebc7213906;hp=0000000000000000000000000000000000000000;hpb=c232d04e7a5bffb72063240ee7e15967f46c4873;p=csit.git

diff --git a/tests/func/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot b/tests/func/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot
new file mode 100644
index 0000000000..de38c56b2d
--- /dev/null
+++ b/tests/func/vxlan/eth2p-ethip4vxlan-l2xcbase-func.robot
@@ -0,0 +1,66 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/vxlan.robot
+| Resource | resources/libraries/robot/l2_traffic.robot
+| Library  | resources.libraries.python.Trace
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV
+| Test Setup | Func Test Setup
+| Test Teardown | Func Test Teardown
+| Documentation | *RFC7348 VXLAN: L2 cross-connect with VXLAN test cases*
+| ...
+| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on
+| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for L2 switching of IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
+| ... | cross-connect (L2XC) switching; VXLAN tunnels are configured between
+| ... | L2XCs on DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets
+| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive
+| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr
+| ... | and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC7348.
+
+*** Variables ***
+| ${VNI}= | 24
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 with L2XC and VXLANoIPv4 tunnels switch ICMPv4 between TG links
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on \
+| | ... | [Ref] RFC7348.DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On
+| | ... | DUT1 and DUT2 configure L2 cross-connect (L2XC), each with one
+| | ... | interface to TG and one VXLAN tunnel interface towards the other
+| | ... | DUT. [Ver] Make TG send ICMPv4 Echo Req between two of its
+| | ... | interfaces; verify all packets are received. [Ref] RFC7348.
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And   Interfaces in 3-node path are up
+| | ${dut1_to_dut2_name}= | Get interface name | ${dut1_node} | ${dut1_to_dut2}
+| | ${dut2_to_dut1_name}= | Get interface name | ${dut2_node} | ${dut2_to_dut1}
+| | And   IP addresses are set on interfaces | ${dut1_node} | ${dut1_to_dut2_name} | ${NONE}
+| |       ...                                | ${dut2_node} | ${dut2_to_dut1_name} | ${NONE}
+| | ${dut1s_vxlan}= | When Create VXLAN interface     | ${dut1_node} | ${VNI}
+| |                 | ...  | ${dut1s_ip_address} | ${dut2s_ip_address}
+| |                   And  Interfaces are added to xconnect | ${dut1_node}
+| |                   ...  | ${dut1_to_tg} | ${dut1s_vxlan}
+| | ${dut2s_vxlan}= | And  Create VXLAN interface     | ${dut2_node} | ${VNI}
+| |                 | ...  | ${dut2s_ip_address} | ${dut1s_ip_address}
+| |                   And  Interfaces are added to xconnect | ${dut2_node}
+| |                   ...  | ${dut2_to_tg} | ${dut2s_vxlan}
+| | Then Send and receive ICMPv4 bidirectionally
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}