X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fperf%2FLong_IPv4_Intel-X520-DA2.robot;h=3a079cc81ea2a21c5bdfdb601da993609ab6103b;hb=636b60b97e4b1dbd6df0701627fe731edec6100b;hp=3236f93c79ab862e2314e0f92e20796b58f116dd;hpb=8825ed229f1d1fbd12d0cec0a128f42f22ae11fe;p=csit.git

diff --git a/tests/perf/Long_IPv4_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Intel-X520-DA2.robot
index 3236f93c79..3a079cc81e 100644
--- a/tests/perf/Long_IPv4_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_Intel-X520-DA2.robot
@@ -24,8 +24,13 @@
 | ... | L3 | Intel-X520-DA2
 | Suite Teardown | 3-node Performance Suite Teardown
 | Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ...           | AND          | Show vpp trace dump on all DUTs
+| Test Teardown | Run Keywords
+| ...           | Run Keyword If Test Failed
+| ...           | Traffic should pass with no loss | 10
+| ...           | ${min_rate}pps | ${framesize} | 3-node-IPv4
+| ...           | fail_on_loss=${False}
+| ...           | AND | Remove startup configuration of VPP from all DUTs
+| ...           | AND | Show vpp trace dump on all DUTs
 | Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
@@ -48,16 +53,20 @@
 | ... | interfaces.
 | ... | *[Ref] Applicable standard specifications:* RFC2544.
 
+*** Variables ***
+#X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+
 *** Test Cases ***
 | TC01: 64B NDR binary search - DUT IPv4 - 1thread 1core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -76,10 +85,10 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -100,10 +109,10 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 1518
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -122,10 +131,10 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
-| | ${framesize}= | Set Variable | 1518
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -146,10 +155,10 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -167,10 +176,10 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -190,10 +199,10 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -212,10 +221,10 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -237,9 +246,9 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 1518
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -259,9 +268,9 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 1518
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -283,9 +292,9 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -304,9 +313,9 @@
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -326,10 +335,10 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -348,10 +357,10 @@
 | | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -373,9 +382,9 @@
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 1518
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -395,9 +404,9 @@
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames
 | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 1518
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -419,9 +428,9 @@
 | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -440,9 +449,9 @@
 | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames
 | | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -457,17 +466,16 @@
 | | ...                                       | ${glob_loss_acceptance}
 | | ...                                       | ${glob_loss_acceptance_type}
 
-*** Test Cases ***
 | TC19: IMIX_v4_1 NDR binary search - DUT IPv4 - 1thread 1core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find NDR for IMIX_v4_1 frame size
 | | ... | using binary search start at 10GE linerate, step 100kpps.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
 | | ${framesize}= | Set Variable | IMIX_v4_1
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_IMIX_v4_1}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
@@ -481,16 +489,16 @@
 | | ...                                       | ${min_rate} | ${max_rate}
 | | ...                                       | ${threshold}
 
-| TC20: 64B PDR binary search - DUT IPv4 - 1thread 1core 1rxq
+| TC20: IMIX_v4_1 PDR binary search - DUT IPv4 - 1thread 1core 1rxq
 | | [Documentation]
 | | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \
 | | ... | 1 receive queue per NIC port. [Ver] Find PDR for IMIX_v4_1 frame size
 | | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%.
 | | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
 | | ${framesize}= | Set Variable | IMIX_v4_1
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_IMIX_v4_1}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}