X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fperf%2FLong_IPv4_Policer_Intel-X520-DA2.robot;h=d691bf9292e130fbd4e54d0763a4bd2e86360611;hb=2671e2616aab7a0bfec7a3501d53ccd72e12d668;hp=6803b0f6609403995f309fb6f4cf5008a58ba2f4;hpb=9c789dbbc3e0230d7ad0940c36a64c063da14c27;p=csit.git

diff --git a/tests/perf/Long_IPv4_Policer_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Policer_Intel-X520-DA2.robot
index 6803b0f660..d691bf9292 100644
--- a/tests/perf/Long_IPv4_Policer_Intel-X520-DA2.robot
+++ b/tests/perf/Long_IPv4_Policer_Intel-X520-DA2.robot
@@ -22,8 +22,13 @@
 | ... | L3 | Intel-X520-DA2
 | Suite Teardown | 3-node Performance Suite Teardown
 | Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ...           | AND          | Show vpp trace dump on all DUTs
+| Test Teardown | Run Keywords
+| ...           | Run Keyword If Test Failed
+| ...           | Traffic should pass with no loss | 10
+| ...           | ${min_rate}pps | ${framesize} | 3-node-IPv4
+| ...           | fail_on_loss=${False}
+| ...           | AND | Remove startup configuration of VPP from all DUTs
+| ...           | AND | Show vpp trace dump on all DUTs
 | Documentation | *RFC2544: Pkt throughput IPv4 policer test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
@@ -48,6 +53,8 @@
 | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698.
 
 *** Variables ***
+#X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
 | ${cir}= | ${100}
 | ${eir}= | ${150}
 
@@ -59,15 +66,15 @@
 | | ... | Byte frames using binary search start at 10GE linerate, step \
 | | ... | 100kpps.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -85,15 +92,15 @@
 | | ... | Byte frames using binary search start at 10GE linerate, step \
 | | ... | 100kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -112,15 +119,15 @@
 | | ... | phy core, 1 receive queue per NIC port. [Ver] Find NDR for 1518 \
 | | ... | Byte frames using binary search start at 10GE linerate, step 10kpps.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
-| | ${framesize}= | Set Variable | 1518
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -138,15 +145,15 @@
 | | ... | Byte frames using binary search start at 10GE linerate, step \
 | | ... | 10kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 1518
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -165,15 +172,15 @@
 | | ... | phy core, 1 receive queue per NIC port. [Ver] Find NDR for 9000 \
 | | ... | Byte frames using binary search start at 10GE linerate, step 5kpps.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -190,15 +197,15 @@
 | | ... | Byte frames using binary search start at 10GE linerate, step 5kpps, \
 | | ... | LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -217,15 +224,15 @@
 | | ... | Byte frames using binary search start at 10GE linerate, step \
 | | ... | 100kpps.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -243,15 +250,15 @@
 | | ... | Byte frames using binary search start at 10GE linerate, step \
 | | ... | 100kpps, LT=0.5%.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -270,15 +277,15 @@
 | | ... | phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 1518 \
 | | ... | Byte frames using binary search start at 10GE linerate, step 10kpps.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 1518
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -296,15 +303,15 @@
 | | ... | Byte frames using binary search start at 10GE linerate, step \
 | | ... | 10kpps, LT=0.5%.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 1518
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -323,15 +330,15 @@
 | | ... | phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 9000 \
 | | ... | Byte frames using binary search start at 10GE linerate, step 5kpps.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -348,15 +355,15 @@
 | | ... | Byte frames using binary search start at 10GE linerate, step 5kpps, \
 | | ... | LT=0.5%.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -374,15 +381,15 @@
 | | ... | phy cores, 2 receive queue per NIC port. [Ver] Find NDR for 64 \
 | | ... | Byte frames using binary search start at 10GE linerate, step 100kpps.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -400,15 +407,15 @@
 | | ... | Byte frames using binary search start at 10GE linerate, step \
 | | ... | 100kpps, LT=0.5%.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 64
-| | ${min_rate}= | Set Variable | 100000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_64B}
+| | ${framesize}= | Set Variable | ${64}
+| | ${min_rate}= | Set Variable | ${100000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -427,15 +434,15 @@
 | | ... | phy cores, 2 receive queue per NIC port. [Ver] Find NDR for 1518 \
 | | ... | Byte frames using binary search start at 10GE linerate, step 10kpps.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 1518
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -453,15 +460,15 @@
 | | ... | Byte frames using binary search start at 10GE linerate, step \
 | | ... | 10kpps, LT=0.5%.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 1518
-| | ${min_rate}= | Set Variable | 10000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${framesize}= | Set Variable | ${1518}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
 | | And   Apply startup configuration on all VPP DUTs
@@ -480,15 +487,15 @@
 | | ... | phy cores, 2 receive queue per NIC port. [Ver] Find NDR for 9000 \
 | | ... | Byte frames using binary search start at 10GE linerate, step 5kpps.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology
@@ -505,15 +512,15 @@
 | | ... | Byte frames using binary search start at 10GE linerate, step 5kpps, \
 | | ... | LT=0.5%.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH
-| | ${framesize}= | Set Variable | 9000
-| | ${min_rate}= | Set Variable | 5000
-| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${framesize}= | Set Variable | ${9000}
+| | ${min_rate}= | Set Variable | ${10000}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
 | | ${binary_min}= | Set Variable | ${min_rate}
 | | ${binary_max}= | Set Variable | ${max_rate}
 | | ${threshold}= | Set Variable | ${min_rate}
 | | Set Test Variable | ${cb} | ${framesize}
 | | Set Test Variable | ${eb} | ${framesize}
-| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Apply startup configuration on all VPP DUTs
 | | When  IPv4 forwarding initialized in a 3-node circular topology