X-Git-Url: https://gerrit.fd.io/r/gitweb?a=blobdiff_plain;f=tests%2Fperf%2FLong_Lisp_Intel-X520-DA2.robot;h=8812b9e0ed9ca74c244e5049431f3c39c37477d0;hb=13809a4ee66ec5e9c92ac3600805251791dfcd2b;hp=2ff8a582ab25b1ca330e6cd853923c7d603aafda;hpb=32ffb106ab41adab440a509ff8f6ec947ffe263d;p=csit.git

diff --git a/tests/perf/Long_Lisp_Intel-X520-DA2.robot b/tests/perf/Long_Lisp_Intel-X520-DA2.robot
index 2ff8a582ab..8812b9e0ed 100644
--- a/tests/perf/Long_Lisp_Intel-X520-DA2.robot
+++ b/tests/perf/Long_Lisp_Intel-X520-DA2.robot
@@ -26,7 +26,12 @@
 | ... | L3 | Intel-X520-DA2
 | Suite Teardown | 3-node Performance Suite Teardown
 | Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| Test Teardown | Run Keywords
+| ...           | Run Keyword If Test Failed
+| ...           | Traffic should pass with no loss | 10
+| ...           | ${min_rate}pps | ${framesize} | 3-node-IPv4
+| ...           | fail_on_loss=${False}
+| ...           | AND | Remove startup configuration of VPP from all DUTs
 | Documentation | *RFC6830: Pkt throughput Lisp test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
@@ -57,7 +62,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv4 | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv4
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_72B}
@@ -89,6 +94,7 @@
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | LISP_IPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_72B}
@@ -121,7 +127,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 1480 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv4 | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv4
 | | ${framesize}= | Set Variable | 1480
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_1488B}
@@ -152,6 +158,7 @@
 | | ... | port. [Ver] Find PDR for 1480 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | LISP_IPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1480
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_1488B}
@@ -184,7 +191,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv4 | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv4
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_9008B}
@@ -215,6 +222,7 @@
 | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | LISP_IPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_9008B}
@@ -246,7 +254,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv4 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv4
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_72B}
@@ -278,6 +286,7 @@
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps, LT=0.5%.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_72B}
@@ -310,7 +319,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 1480 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv4 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1480
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_1488B}
@@ -341,7 +351,8 @@
 | | ... | port.
 | | ... | [Ver] Find PDR for 1480 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv4 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1480
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_1488B}
@@ -374,7 +385,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv4 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_9008B}
@@ -404,7 +416,8 @@
 | | ... | port.
 | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps, LT=0.5%.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv4 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_9008B}
@@ -436,7 +449,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv4 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv4
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_72B}
@@ -468,6 +481,7 @@
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps, LT=0.5%.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_72B}
@@ -500,7 +514,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 1480 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv4 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1480
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_1488B}
@@ -531,7 +546,8 @@
 | | ... | port.
 | | ... | [Ver] Find PDR for 1480 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv4 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1480
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_1488B}
@@ -541,6 +557,7 @@
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 forwarding initialized in a 3-node circular topology
 | | ...  | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4}
 | | ...  | ${dut2_to_tg_ip4} | ${prefix4}
@@ -563,7 +580,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv4 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_9008B}
@@ -593,7 +611,8 @@
 | | ... | port.
 | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps, LT=0.5%.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv4 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_9008B}
@@ -625,7 +644,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 78 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6 | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_86B}
@@ -657,6 +676,7 @@
 | | ... | [Ver] Find PDR for 78 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | LISP_IPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_86B}
@@ -689,7 +709,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6 | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_1488B}
@@ -721,6 +741,7 @@
 | | ... | [Ver] Find PDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | LISP_IPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_1488B}
@@ -753,7 +774,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6 | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_9008B}
@@ -784,6 +805,7 @@
 | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | LISP_IPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_9008B}
@@ -815,7 +837,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 78 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_86B}
@@ -847,6 +869,7 @@
 | | ... | [Ver] Find PDR for 78 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps, LT=0.5%.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_86B}
@@ -879,7 +902,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_1488B}
@@ -910,7 +934,8 @@
 | | ... | port.
 | | ... | [Ver] Find PDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv6 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_1488B}
@@ -943,7 +968,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_9008B}
@@ -973,7 +999,8 @@
 | | ... | port.
 | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv6 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_9008B}
@@ -1005,7 +1032,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 78 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_86B}
@@ -1037,6 +1064,7 @@
 | | ... | [Ver] Find PDR for 78 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps, LT=0.5%.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_86B}
@@ -1069,7 +1097,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_1488B}
@@ -1100,7 +1129,8 @@
 | | ... | port.
 | | ... | [Ver] Find PDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv6 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_1488B}
@@ -1133,7 +1163,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_9008B}
@@ -1163,7 +1194,8 @@
 | | ... | port.
 | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps, LT=0.5%.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv6 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_linerate_pps_9008B}
@@ -1195,7 +1227,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv4oIPv6 | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv4oIPv6
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_112B}
@@ -1227,6 +1259,7 @@
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | LISP_IPv4oIPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_112B}
@@ -1259,7 +1292,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv4oIPv6 | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv4oIPv6
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_1508B}
@@ -1291,6 +1324,7 @@
 | | ... | [Ver] Find PDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | LISP_IPv4oIPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_1508B}
@@ -1323,7 +1357,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv4oIPv6 | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv4oIPv6
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_9048B}
@@ -1354,6 +1388,7 @@
 | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | LISP_IPv4oIPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_9048B}
@@ -1385,7 +1420,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv4oIPv6 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv4oIPv6
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_112B}
@@ -1417,6 +1452,7 @@
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv4oIPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_112B}
@@ -1449,7 +1485,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv4oIPv6 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv4oIPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_1508B}
@@ -1480,7 +1517,8 @@
 | | ... | port.
 | | ... | [Ver] Find PDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv4oIPv6 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv4oIPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_1508B}
@@ -1513,7 +1551,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv4oIPv6 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv4oIPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_9048B}
@@ -1543,7 +1582,8 @@
 | | ... | port.
 | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps, LT=0.5%.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv4oIPv6 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv4oIPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_9048B}
@@ -1575,7 +1615,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 64 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv4oIPv6 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv4oIPv6
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_112B}
@@ -1607,6 +1647,7 @@
 | | ... | [Ver] Find PDR for 64 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps, LT=0.5%.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv4oIPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 64
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_112B}
@@ -1639,7 +1680,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv4oIPv6 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv4oIPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_1508B}
@@ -1668,9 +1710,10 @@
 | | ... | [Cfg] DUT runs IPv6 LISP remote static mappings and whitelist \
 | | ... | filters config with 4 threads, 4 phy cores, 2 receive queues per NIC
 | | ... | port.
-| | ... | [Ver] Find PDR for 1460 Byte frames using binary search starlt
+| | ... | [Ver] Find PDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv4oIPv6 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv4oIPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_1508B}
@@ -1680,6 +1723,7 @@
 | | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
 | | And   Add PCI devices to DUTs from 3-node single link topology
 | | And   Add No Multi Seg to all DUTs
+| | And   Apply startup configuration on all VPP DUTs
 | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology
 | | ...  | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6}
 | | ...  | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6}
@@ -1702,7 +1746,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv4oIPv6 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv4oIPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_9048B}
@@ -1732,7 +1777,8 @@
 | | ... | port.
 | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps, LT=0.5%.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv4oIPv6 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv4oIPv6
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_9048B}
@@ -1764,7 +1810,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 78 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6oIPv4 | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6oIPv4
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_126B}
@@ -1796,6 +1842,7 @@
 | | ... | [Ver] Find PDR for 78 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | LISP_IPv6IPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_126B}
@@ -1828,7 +1875,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6oIPv4 | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6oIPv4
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_1508B}
@@ -1860,6 +1907,7 @@
 | | ... | [Ver] Find PDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | LISP_IPv6oIPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_1508B}
@@ -1892,7 +1940,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6oIPv4 | SKIP_PATCH
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | LISP_IPv6oIPv4
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_9048B}
@@ -1923,6 +1971,7 @@
 | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps, LT=0.5%.
 | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | LISP_IPv6oIPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_9048B}
@@ -1954,7 +2003,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 78 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6oIPv4 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6oIPv4
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_126B}
@@ -1986,6 +2035,7 @@
 | | ... | [Ver] Find PDR for 78 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps, LT=0.5%.
 | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv6oIPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_126B}
@@ -2018,7 +2068,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6oIPv4 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6oIPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_1508B}
@@ -2049,7 +2100,8 @@
 | | ... | port.
 | | ... | [Ver] Find PDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv6oIPv4 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv6oIPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_1508B}
@@ -2082,7 +2134,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6oIPv4 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | LISP_IPv6oIPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_9048B}
@@ -2112,7 +2165,8 @@
 | | ... | port.
 | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps, LT=0.5%.
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv6oIPv4 | SKIP_PATCH
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | LISP_IPv6oIPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_9048B}
@@ -2144,7 +2198,7 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 78 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6oIPv4 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6oIPv4
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_126B}
@@ -2176,6 +2230,7 @@
 | | ... | [Ver] Find PDR for 78 Byte frames using binary search start
 | | ... | at 10GE linerate, step 100kpps, LT=0.5%.
 | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv6oIPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 78
 | | ${min_rate}= | Set Variable | 100000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_126B}
@@ -2208,7 +2263,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6oIPv4 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6oIPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_1508B}
@@ -2239,7 +2295,8 @@
 | | ... | port.
 | | ... | [Ver] Find PDR for 1460 Byte frames using binary search start
 | | ... | at 10GE linerate, step 10kpps, LT=0.5%.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv6oIPv4 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv6oIPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 1460
 | | ${min_rate}= | Set Variable | 10000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_1508B}
@@ -2272,7 +2329,8 @@
 | | ... | port.
 | | ... | [Ver] Find NDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6oIPv4 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | LISP_IPv6oIPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_9048B}
@@ -2302,7 +2360,8 @@
 | | ... | port.
 | | ... | [Ver] Find PDR for 9000 Byte frames using binary search start
 | | ... | at 10GE linerate, step 5kpps, LT=0.5%.
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv6oIPv4 | SKIP_PATCH
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | LISP_IPv6oIPv4
+| | ...    | SKIP_PATCH
 | | ${framesize}= | Set Variable | 9000
 | | ${min_rate}= | Set Variable | 5000
 | | ${max_rate}= | Set Variable | ${10Ge_lisp_iph_linerate_pps_9048B}